Author Topic: Anyone Ride With No Gauges? (Pics)  (Read 3171 times)

0 Members and 1 Guest are viewing this topic.

Offline no718.com

  • Full Member
  • *
  • Posts: 82
    • No.718 Brand
Anyone Ride With No Gauges? (Pics)
« on: August 19, 2010, 10:52:42 AM »
I was thinking of just completely taking off my gauges to give my '78 750 a more simpler look. Anyone done this? Have pics? I think I want to go for that low, Wrench Monkee Bratstyle look . . .

Here Is my motivation:


I just ordered a seat that looks like my terrible photoshop rendering of my bike here (notice with gauges very front end heavy):


Now here with gauges gone (alot cleaner and lighter):


Thoughts . . . .

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,938
Re: Anyone Ride With No Gauges? (Pics)
« Reply #1 on: August 19, 2010, 10:55:56 AM »
NO gauges look much better. Get a bicycle computer and install somewhere discreet to prevent getting caught speeding. Of course you are then without a tripometer and this may be illegal in some states(just guessing here  -otherwise whats the mileage on the engine?/bike?).  For tach listen to the sound of the engine for gear changes etc. Easy enough.

Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline no718.com

  • Full Member
  • *
  • Posts: 82
    • No.718 Brand
Re: Anyone Ride With No Gauges? (Pics)
« Reply #2 on: August 19, 2010, 11:04:55 AM »
Good point on not knowing how many miles i'll have on it . . . I checked the DMV website for NY and speedometers are not required for motorcycles prior 1980:
http://www.nydmv.state.ny.us/forms/mv529b.pdf

Offline kck3

  • Hot Shot
  • ***
  • Posts: 307
Re: Anyone Ride With No Gauges? (Pics)
« Reply #3 on: August 19, 2010, 11:17:30 AM »
There are brackets you can buy to lower the gauges.  This gives the bike a better look if you are lowering the bars.

Offline swellguy

  • An electric cattle prod is a
  • Hot Shot
  • ***
  • Posts: 579
  • Divorce is so expensive because it's worth it.
    • http://ksphotos.com
Re: Anyone Ride With No Gauges? (Pics)
« Reply #4 on: August 19, 2010, 11:46:09 AM »
I was thinking of just completely taking off my gauges to give my '78 750 a more simpler look. Anyone done this? Have pics? I think I want to go for that low, Wrench Monkee Bratstyle look . . .
<snip>
Thoughts . . . .
Four of the Harleys I built have no gauges except maybe oil pressure, but these were custom ground up builds registered as special construction. I get a sense that no speedo at least on a "stock" bike might result in a ticket if you happen to be pulled over by the fuzz.
This project started in confusion and will end in disarray.
--
http://forums.sohc4.net/index.php?topic=76471.msg852227#msg852227

kerber

  • Guest
Re: Anyone Ride With No Gauges? (Pics)
« Reply #5 on: August 19, 2010, 11:49:52 AM »
If you do some googling, there are some really really nice looking after market guages that are much smaller. There are even some electronic kits that combine everything into a single discrete LED display. Here are some examples: http://www.denniskirk.com/jsp/tpl/cmn/prodlist.jsp?store=Main&category=41011,410&_requestid=542769

Offline no718.com

  • Full Member
  • *
  • Posts: 82
    • No.718 Brand
Re: Anyone Ride With No Gauges? (Pics)
« Reply #6 on: August 19, 2010, 01:09:20 PM »
Kerber those are some very nice gauges.

Lets say I went with a single gauge of a smaller size, is there another location on the frame where I could mount it that would be visible yet not in the way of the rest of the bikes functionality?

kerber

  • Guest
Re: Anyone Ride With No Gauges? (Pics)
« Reply #7 on: August 19, 2010, 01:28:17 PM »
As long as the cables reach, I don't imagine it matters much where you put it. If you can, take some tape and scrap wood or something approx the size of the gauge you are looking at and go spend some time trying places out. If you find a spot that looks promising, tape the dummy gauge there, get on your bike, and check the visibility. It's really going to depend on your bike and your personal preferences. One last thing; make sure that you can either find or fabricate a mount so that the actual gauge will work in your preferred spot.

If you are really a hardware hacker, maybe you could even integrate one of those electronic all in one gauges with the back of a riding glove, then run the cable up your sleeve and have a connector near your waist that attaches to the bike...

Offline 78CB750CAFE

  • I'm not really an
  • Expert
  • ****
  • Posts: 960
  • Ride, wrench, repeat.
    • Drewfus Nation, my podcast, bicycle collection, blog etc
Re: Anyone Ride With No Gauges? (Pics)
« Reply #8 on: August 19, 2010, 01:30:24 PM »
NO gauges look much better. Get a bicycle computer and install somewhere discreet to prevent getting caught speeding. Of course you are then without a tripometer and this may be illegal in some states(just guessing here  -otherwise whats the mileage on the engine?/bike?).  For tach listen to the sound of the engine for gear changes etc. Easy enough.



bicycle computer will give you an odo and trip meter
"I believe in the bodies, I believe in the blood, I believe in salt around the rim of the glass because it makes us thirsty, and when we drink, then we all fall in love"
-212 Margarita by The Hold Steady
Build thread:http://forums.sohc

Offline FunJimmy

  • Who you calling
  • Old Timer
  • ******
  • Posts: 3,802
  • Vancouver
Re: Anyone Ride With No Gauges? (Pics)
« Reply #9 on: August 19, 2010, 01:31:03 PM »
I mounted a tach only and put it quite low between the top triple and headlight.
Looks very clean.

You can then have a buddy clock you at typical street speed and again at a typical (legal) highway speed both in 5th gear and put a red dot on the tach for each one. That way if you suspect radar, shift into 5th and drop your RPM to the speed markings.

Just a thought.
FJ
You never see a motorcycle parked outside of a psychiatrist's office!

CB550 Cafe Interceptor a Gentlemans Roadster
http://forums.sohc4.net/index.php?topic=27159.0

Offline motocyconomad

  • Expert
  • ****
  • Posts: 1,401
Re: Anyone Ride With No Gauges? (Pics)
« Reply #10 on: August 19, 2010, 01:40:55 PM »
I have some extras i cut tach spedo brackets at work (69-76)I took one cut it in half and used it to mount my tack center and low  still need to cut the 77-78 I have a program to cut for both gauges and one for a single   though cutting one in half works just as good

Offline Bob Wessner

  • "Carbs Suck!"
  • Really Old Timer ...
  • *******
  • Posts: 10,079
Re: Anyone Ride With No Gauges? (Pics)
« Reply #11 on: August 19, 2010, 01:42:56 PM »
Good point on not knowing how many miles i'll have on it . . . I checked the DMV website for NY and speedometers are not required for motorcycles prior 1980:
http://www.nydmv.state.ny.us/forms/mv529b.pdf

Might want to print and carry a copy of part that addresses this, just in case some officer is not up on all the DMV codes if you get stopped.  ;)
We'll all be someone else's PO some day.

kerber

  • Guest
Re: Anyone Ride With No Gauges? (Pics)
« Reply #12 on: August 19, 2010, 01:58:23 PM »
Registration... check
insurance... check
printed rules explaining that your bike is legal.... check

Offline Jim F

  • Need a bigger house for more toys
  • Master
  • *****
  • Posts: 1,887
  • go baby go
Re: Anyone Ride With No Gauges? (Pics)
« Reply #13 on: August 19, 2010, 01:58:58 PM »
Just the tach

2002 RC51 1000 (SP2)
1983 GS1100EC Suzuki
2002 998 Dukati (Customers Bike)
1992 KTM500 2 stroke
1975 CB750/836 Honda
1978 GS750/840 Suzuki

Offline no718.com

  • Full Member
  • *
  • Posts: 82
    • No.718 Brand
Re: Anyone Ride With No Gauges? (Pics)
« Reply #14 on: August 20, 2010, 06:29:35 AM »
Kerber you're too funny man lololol . . . Yeah with the way Porky's are here in the city they usually don't know their asses from elbows so I'll stuff the print out in my jacket somewhere