« previous next »
Pages: [1]   Go Down

Author Topic: K&N part #S  (Read 946 times)

0 Members and 1 Guest are viewing this topic.

Offline chippyfive50

  • Hot Shot
  • ***
  • Posts: 405
  • NO PEE ON TEPEE
    • thesweetimpala
K&N part #S
« on: February 27, 2006, 07:58:19 AM »
Does anybody know the part # for the K&N pods that fit the 500/550.....????
Logged
SOHC Member#4000
71' 500K0 #1021237--E1108327
78' 550
72' 750K2(sold to "Craig")
74' 750K4 #2306334--E2303422
73' CL175
http://gallery.sohc4.net/main.php?g2_itemId=14013

Offline volz1fsu

  • Enthusiast
  • **
  • Posts: 104
Re: K&N part #S
« Reply #1 on: February 27, 2006, 09:16:39 AM »
Why not measure the o.d. of the carb inlets and see what they have that fits.  I think there is only about 3.5" between the outer carbs and the frame though.
Logged

Offline chippyfive50

  • Hot Shot
  • ***
  • Posts: 405
  • NO PEE ON TEPEE
    • thesweetimpala
Re: K&N part #S
« Reply #2 on: February 27, 2006, 02:21:36 PM »
I don't have my bike in my office, and there are 2 sizes which are close., and I am being lazy, and a realworld fit would be reassuring.... 
Logged
SOHC Member#4000
71' 500K0 #1021237--E1108327
78' 550
72' 750K2(sold to "Craig")
74' 750K4 #2306334--E2303422
73' CL175
http://gallery.sohc4.net/main.php?g2_itemId=14013

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Re: K&N part #S
« Reply #3 on: February 27, 2006, 03:14:05 PM »
The early Cb500/550 Carbs are 39 MM O.D. and the later ones are 38 mm O.D.

Cheers,
Logged
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.
Pages: [1]   Go Up
« previous next »