Author Topic: I've Seen Them Before, Where Can I Find...............  (Read 2450 times)

0 Members and 1 Guest are viewing this topic.

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,919
  • Bought her new 4/75
I've Seen Them Before, Where Can I Find...............
« on: August 21, 2010, 03:44:17 PM »
a tray for the back of my work bench, preferrably that will attach to the pegboard, that I can place my aerosol cans, etc in??
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Nikkisixx

  • Expert
  • ****
  • Posts: 839
Re: I've Seen Them Before, Where Can I Find...............
« Reply #1 on: August 21, 2010, 04:02:19 PM »
Yeah, I've seen those too - Sears maybe? Home improvement stores have a good selection of peg board stuff, could try there.   Sounds like it would be a good do it yourself project though.  Use an old ammo box or bend up a $10 piece of sheet metal...
It is a proven fact that modifying a SOHC Honda in any way will bring on the apocalypse.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: I've Seen Them Before, Where Can I Find...............
« Reply #2 on: August 21, 2010, 05:10:07 PM »
 If you are laying them down... paint tray..

 If near a salvage yard or large city, look for or run an ad for single saddlebags.. like Shoei.. that would be cool.. ;D

 The coolest cabinet I  have is a lockable 6 ft high white Pharmacy cabinet.. my only regret, i did not grab all 3.. was high  bidder.. ;D.. very well made compared to the Echlin ones I have...
« Last Edit: August 21, 2010, 05:17:52 PM by 754 »
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: I've Seen Them Before, Where Can I Find...............
« Reply #3 on: August 21, 2010, 05:40:34 PM »
This isn't a tray, but they're designed to hold spray cans on pegboards.

http://www.amazon.com/Triton-Products-Durahook-Spring-Holder/dp/B000FKDEJ4

Offline 736cc

  • Master
  • *****
  • Posts: 1,724
Re: I've Seen Them Before, Where Can I Find...............
« Reply #4 on: August 23, 2010, 02:30:23 PM »
Griots garage

Offline lone*X

  • Expert
  • ****
  • Posts: 1,126
Re: I've Seen Them Before, Where Can I Find...............
« Reply #5 on: August 23, 2010, 02:49:51 PM »
Something like this?

http://www.samsclub.com/sams/shop/product.jsp?productId=176317&pid=Froogle&ci_src=14110944&ci_sku=199334

Or this site:
http://hookstore.com/specialtyx.htm#kb

I googled "garage pegboard accessories" to find that.  Lots of other results for pegboard accessories out there.
« Last Edit: August 23, 2010, 03:11:38 PM by lone*X »
Lone*X  ( Don )

75 CB550K1  
VTX1800C for two up cruisin.
Several others have come and gone but whose keeping track.
52 years on two wheels and counting.....
"The best safety feature of any motorcycle is the one God put between your ears.  It's also the least utilized"

Markcb750

  • Guest
Re: I've Seen Them Before, Where Can I Find...............
« Reply #6 on: August 23, 2010, 03:27:04 PM »
Both Northern Tool & Harbor freight have a selection of peg board trays. 

Northern Freight's where a little nicer.


Offline Really?

  • I've come to the conclusion that I AM a
  • Really Old Timer ...
  • *******
  • Posts: 5,279
Re: I've Seen Them Before, Where Can I Find...............
« Reply #8 on: August 23, 2010, 03:45:33 PM »
What a great thread!!!!!  I have been Gladiator'ing my garage and have been staring at the pegboard I have wanting to do more with it.

Thanks!
I don't have a motorcycle, sold it ('85 Yamaha Venture Royale).  Haven't had a CB750 for over 40 years.

The Wife's Bike - 750K5
The Kid's Bike - 750K3

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,966
  • Saver of unloved motorcycles.
Re: I've Seen Them Before, Where Can I Find...............
« Reply #9 on: August 24, 2010, 08:54:39 AM »
I found some plastic coated wire products in the kitchen-closet section of Lowes, Menards etc. They screw to the wall and will also mount to a cabinet door. Inexpensive compared to pitpals.com but look there too.
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline mcuozzo

  • Hot Shot
  • ***
  • Posts: 311
  • Bottle in front of me or frontal labotomy?
    • 77 CB750K - needs total rebuild
Re: I've Seen Them Before, Where Can I Find...............
« Reply #10 on: August 24, 2010, 02:40:24 PM »
or you could build something like this...

http://www.instructables.com/id/Spray-Can,-etc,-Rack/



Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,349
  • Central Texas
Re: I've Seen Them Before, Where Can I Find...............
« Reply #11 on: August 24, 2010, 06:49:10 PM »
I put mine in a cabinet just above my workbench, makes for a tidy workplace!
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,919
  • Bought her new 4/75
Re: I've Seen Them Before, Where Can I Find...............
« Reply #12 on: August 24, 2010, 09:41:29 PM »
Thanks for the ideas guy. My cabinets are full (and a mess) which makes it difficult and the workbench has a gap between it and the wall about the width of an aerosol can which causes things to disappear into the abyss. I spent a fair amount of time online, at Lowes and Target. Nothing local as usual. I hate ordering online all the time. UPS gets enough of my hard earned cash anyway plus I'd love to support the local effort.

The best I managed to find online line was the Clear One TC118 12 Can Aerosol Can Rack from AutoPartsDealer.com. I ordered 2 which will just about fill up all the space behind my work bench. I didn't want to spend 50 bucks for this but my time was worth more than that. Diamond Life has a 18 can rack. Too short for 1 and too long for 2 plus too expensive.  It's a done deal with free shipping.

Thanks for all your input.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,349
  • Central Texas
Re: I've Seen Them Before, Where Can I Find...............
« Reply #13 on: August 28, 2010, 01:44:09 PM »

The best I managed to find online line was the Clear One TC118 12 Can Aerosol Can Rack from AutoPartsDealer.com. I ordered 2 which will just about fill up all the space behind my work bench. I didn't want to spend 50 bucks for this but my time was worth more than that. Diamond Life has a 18 can rack. Too short for 1 and too long for 2 plus too expensive.  It's a done deal with free shipping.

Ok, now we will want to see pics!
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,919
  • Bought her new 4/75
Re: I've Seen Them Before, Where Can I Find...............
« Reply #14 on: August 28, 2010, 03:58:23 PM »
Just got home to the 2 boxes, 1 of which FredEx crushed a little. I'll open and take some pictures and be back soon.
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,919
  • Bought her new 4/75
Re: I've Seen Them Before, Where Can I Find...............
« Reply #15 on: August 28, 2010, 05:28:47 PM »
OK, you want pix, we like pix, you got pix. Very sturdy soft plastic. 0.175" thick & 33.5" long. They come with 4 screws. I attached to my pegboard.

Empty Tray



Filled Tray



Filled Double Tray Set Up



Manufacturer


As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,349
  • Central Texas
Re: I've Seen Them Before, Where Can I Find...............
« Reply #16 on: August 29, 2010, 05:29:40 PM »
Nice.......
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline Kframe

  • Hot Shot
  • ***
  • Posts: 579
  • Life is good!
Re: I've Seen Them Before, Where Can I Find...............
« Reply #17 on: August 29, 2010, 08:46:55 PM »
Those are awesome!
I could really use a set too.
I wonder what the top of my workbench looks like?  (And let's not even talk about my desk.  :-X )
 :D
-K
2007 Triumph Bonneville T100, ARK'd, Pods, TOR's, Napoleon's, Innovate G5 Air/Fuel Gauge, Ignition Relocation by D9, Stebel Nautilus, Avon Roadriders
1984 Honda Shadow VT700c, Stock
1974 Honda CB550K, In rehab
1986 Honda Helix