Author Topic: RC exhaust  (Read 1341 times)

0 Members and 1 Guest are viewing this topic.

Offline bluesmoke69

  • Hot Shot
  • ***
  • Posts: 354
RC exhaust
« on: September 04, 2010, 11:48:34 PM »
HI first post here hope it was OK to post this here. I bought a CB750F with a RC 4 into 1 exhaust. It look exactly like the one in the race bike gallery in this section that is signed, is this a good exhaust. Also the exhaust has two pieces by the flange that bolts to the motor, and had some kind of tape holding them onto the exhaust could you please tell what kind of tape this is so I could remount the exhaust. Thanks for any help or information Andy.

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: RC exhaust
« Reply #1 on: September 05, 2010, 12:07:53 AM »
Is a good exhaust, but there is a lot of different favorites.

 I have used masking tape on the collars, it may  burn off, but it only has to hold the collars till you start tightening things up..
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline bluesmoke69

  • Hot Shot
  • ***
  • Posts: 354
Re: RC exhaust
« Reply #2 on: September 05, 2010, 12:26:32 AM »
Thank is there any way to tell which style or mode you have. Because it looks exactly like the one in the signed photo. The RC emblem is the same.