« previous next »
Pages: [1]   Go Down

Author Topic: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!  (Read 4068 times)

0 Members and 1 Guest are viewing this topic.

Offline RRRToolSolutions

  • Expert
  • ****
  • Posts: 1,167
  • I love old Japanese bikes!
Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« on: June 05, 2015, 05:01:52 PM »
Updated July 27, 2015 -

I am posting a YouTube link to a brand-new video on the Gordon Frame Kit. This video explains what it is and how it works. This may help you decide if you want/need one.


Thanks, Gordon/RTS

From June 10th -
Guys,

If you've been holding onto those photos of your past or current build, if you have a Frame Kit and just been waiting on a new contest, Get Your Build On!

I am looking for more CB750 build and project photos using the Gordon Frame Repair Kit. New Kits are available starting June 8th. As before, I will use your photos on my new site and our Facebook page where we now have 1,250+ followers.

There will be Two Winners - Those will be announced on October 31st from photos submitted today forward.

First Place -
You'll get our 8-Piece Vessel JIS Shop Drivers Set
You'll get our 7-Piece Sprocket Socket Axle Wrench Set
You'll get our own kick-ass T-Shirt

Second Place -
You'll get our 8-Piece Vessel JIS Shop Drivers Set
You'll get our own kick-ass T-Shirt

http://www.rrrtoolsolutions.net/Motorcycle-Frame-Metric-Tools.html

Best Regards, Gordon/RTS
« Last Edit: July 27, 2015, 11:38:03 AM by RRRToolSolutions »
Logged
Kaws, Hondas, Yamahas, and Suzukis - especially Kaws

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #1 on: June 05, 2015, 09:23:12 PM »
Here's my K2 after almost two years. This particular frame kit is special (to me at least) as its basically what saved my project. When I first bought it, I didn't look under the tank until later and found out the PO had chopped the frame horribly. A lot of people suggested simply finding another frame, or a different bike altogether.
Logged

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #2 on: June 05, 2015, 09:32:11 PM »
Gordon reached out to me and told me of this perfect kit for the job! I wasn't sure how I'd get it to work since I didn't have the missing tubing, so Gordon added all the missing tubing and the anlge bar triangulation pieces at no extra charge! This was amazing, as we had all of 2 PMs between us, and I was blown away by how Gordon and most others were willing to go out of their way to help me out, a brand new guy without a clue :D

I had my welder carefully work on it since there really wasn't much tubing left at the front, he did a great job and was really impressed with all the color coded installation instructions that came with the kit.
Logged

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #3 on: June 05, 2015, 09:37:03 PM »
After powder coating, the kit blends in so seamlessly, its looks and feels a part of the bike. I have one installed on my K3 too, and that frame was untouched. Usually people think that these are good to have in case there is a top end issue, but there are so many other benefits too. Installing the engine into the frame is a breeze, installing and working on the carbs and air box is SOO much better with a lot more access and room to move tools around tightening down clamps, installing hoses etc. etc. I just did ALL of this, so I'm talking from my hands on experience.
Logged

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,872
  • Saver of unloved motorcycles.
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #4 on: June 05, 2015, 09:37:45 PM »
 Tack welded in, the entire center had been cut out. I removed the center from a wrecked 75F, and welded the stubs back in with the kit. This is disassembly for powder coating and shows how easy it is to work on the engine. I removed the head and cylinder with the engine in the frame, changed the cam and retimed it.



« Last Edit: June 05, 2015, 09:48:20 PM by Don R »
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,763
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #5 on: June 06, 2015, 05:56:58 AM »




Logged

Offline RRRToolSolutions

  • Expert
  • ****
  • Posts: 1,167
  • I love old Japanese bikes!
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #6 on: June 07, 2015, 12:45:39 PM »
Keep them coming guys!!
Logged
Kaws, Hondas, Yamahas, and Suzukis - especially Kaws

Offline RRRToolSolutions

  • Expert
  • ****
  • Posts: 1,167
  • I love old Japanese bikes!
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #7 on: June 10, 2015, 01:33:52 PM »
For those who wanted a kit, I've got them ready. Email me or PM -

rrrtoolsolutions@gmail.com
Logged
Kaws, Hondas, Yamahas, and Suzukis - especially Kaws

Offline Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,910
  • Bought her new 4/75
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #8 on: June 10, 2015, 04:37:52 PM »
Quote from: RRRToolSolutions on June 07, 2015, 12:45:39 PM
Keep them coming guys!!

This weekend perhaps?! Going to start on my second one. Both 75 F's. Took a peek at #1 earlier and took some measurements to duplicate the cuts. The wiring harness frame attachments were located at different distances from the down tube. Guess it doesn't matter though.

How are you guys cutting? Sawzall, grinder, hack saw, tube cutter?
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Davez134

  • Expert
  • ****
  • Posts: 1,485
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #9 on: June 10, 2015, 05:46:44 PM »
Quote from: Jerry Rxman Griffin aka MuthaF'er on June 10, 2015, 04:37:52 PM
Quote from: RRRToolSolutions on June 07, 2015, 12:45:39 PM
Keep them coming guys!!

This weekend perhaps?! Going to start on my second one. Both 75 F's. Took a peek at #1 earlier and took some measurements to duplicate the cuts. The wiring harness frame attachments were located at different distances from the down tube. Guess it doesn't matter though.

How are you guys cutting? Sawzall, grinder, hack saw, tube cutter?

I taped, drew straight lines and used a hacksaw. Very easy and nice straight clean cuts.
Logged

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #10 on: June 10, 2015, 05:53:18 PM »
Quote from: Davez134 on June 10, 2015, 05:46:44 PM
Quote from: Jerry Rxman Griffin aka MuthaF'er on June 10, 2015, 04:37:52 PM
Quote from: RRRToolSolutions on June 07, 2015, 12:45:39 PM
Keep them coming guys!!

This weekend perhaps?! Going to start on my second one. Both 75 F's. Took a peek at #1 earlier and took some measurements to duplicate the cuts. The wiring harness frame attachments were located at different distances from the down tube. Guess it doesn't matter though.

How are you guys cutting? Sawzall, grinder, hack saw, tube cutter?

I taped, drew straight lines and used a hacksaw. Very easy and nice straight clean cuts.
I did the exact same on my K3, might have some pix in my K3 build thread.
Logged

Offline RRRToolSolutions

  • Expert
  • ****
  • Posts: 1,167
  • I love old Japanese bikes!
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #11 on: July 27, 2015, 11:38:38 AM »
Guys, I am posting a YouTube link to a brand-new video on the Gordon Frame Kit. This video explains what it is and how it works. This may help you decide if you want/need one.


Thanks, Gordon/RTS
Logged
Kaws, Hondas, Yamahas, and Suzukis - especially Kaws

Offline SOHC4 Cafe Racer Fan

  • Speak up, Whipper-Snapper! I'm a
  • Really Old Timer ...
  • *******
  • Posts: 15,731
  • SOHC/4 Member #1235
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #12 on: July 27, 2015, 12:04:53 PM »
Excellent video.  For all the newbies wondering why you would ever want a kit, post a link to the video!
Logged
1975 CB550K1 "Blue" Stockish Restomod (http://forums.sohc4.net/index.php?topic=135005.0)
1975 CB550F1 frame/CB650 engine hybrid "The Hot Mess" (http://forums.sohc4.net/index.php/topic,150220.0.html)
2008 Triumph Thruxton (http://forums.sohc4.net/index.php/topic,190956.0.html)
2014 MV Agusta Brutale Dragster 800
2015 Yamaha FZ-09 (http://forums.sohc4.net/index.php/topic,186861.0.html)

"There are some things nobody needs in this world, and a bright-red, hunch-back, warp-speed 900cc cafe racer is one of them — but I want one anyway, and on some days I actually believe I need one.... Being shot out of a cannon will always be better than being squeezed out of a tube. That is why God made fast motorcycles, Bubba." Hunter S. Thompson, Song of the Sausage Creature, Cycle World, March 1995.  (http://www.latexnet.org/~csmith/sausage.html and https://magazine.cycleworld.com/article/1995/3/1/song-of-the-sausage-creature)

Sold/Emeritus
1973 CB750K2 "Bionic Mongrel" (http://forums.sohc4.net/index.php?topic=132734.0) - Sold
1977 CB750K7 "Nine Lives" Restomod (http://forums.sohc4.net/index.php?topic=50490.0) - Sold
2005 RVT1000RR RC51-SP2 "El Diablo" - Sold
2016+ Triumph Thruxton 1200 R (http://forums.sohc4.net/index.php/topic,170198.0.html) - Sold

Offline Davez134

  • Expert
  • ****
  • Posts: 1,485
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #13 on: July 27, 2015, 01:36:52 PM »
If you are building a bike you NEED a kit! So happy with mine, and it saved me a lot of extra work. Also, great selection of quality tools. (I like the pics of the installed kit in the video  ;) ;D )
Logged

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #14 on: July 27, 2015, 03:30:24 PM »
Cool vid! I recognize that F head ;D ;D
Logged

Offline RRRToolSolutions

  • Expert
  • ****
  • Posts: 1,167
  • I love old Japanese bikes!
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #15 on: July 27, 2015, 08:47:01 PM »
Yes Ed, I told you that I would put it to good use and the camera and show visitors don't care that it doesn't have valves! The wrinkle finish power coat and new, OEM screws were all I needed thanks to you. I have used it on the nesting socket set videos, this frame kit, and at several shows I've attended. Thanks Again, Gordon

Logged
Kaws, Hondas, Yamahas, and Suzukis - especially Kaws

Offline edwardmorris

  • Youngish
  • Old Timer
  • ******
  • Posts: 3,142
  • Do not cause harm, nor respond to harm with harm.
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #16 on: July 28, 2015, 09:36:46 AM »
Quote from: RRRToolSolutions on July 27, 2015, 08:47:01 PM
Yes Ed, I told you that I would put it to good use and the camera and show visitors don't care that it doesn't have valves! The wrinkle finish power coat and new, OEM screws were all I needed thanks to you. I have used it on the nesting socket set videos, this frame kit, and at several shows I've attended. Thanks Again, Gordon
Glad it's getting some use :) I still owe you a 100 times over ;D ;D
Logged

Offline Gpreciado

  • Full Member
  • *
  • Posts: 14
Re: Get Your CB750 Build On - Gordon Frame Kit Photo Contest - 2nd Edition!
« Reply #17 on: July 30, 2015, 02:07:59 PM »
I love this kit!! It is definitely worth it. Gordon is a great guy, I had one of the bolts strip on me and lucky I had net welded the joints yet, sent Gordon an email asking for the price of a replacement end piece and he simply replied no charge on its way and sent it 2 day priority. If that isn't a great example of customer service I don't now what is. Buy the kit it is worth it 100%
Logged
Pages: [1]   Go Up
« previous next »