« previous next »
Pages: [1]   Go Down

Author Topic: Over oiled K&N's?  (Read 641 times)

0 Members and 1 Guest are viewing this topic.

Offline jessezm

  • '77 cb400f cafe build
  • Expert
  • ****
  • Posts: 1,004
  • Always wrenching...
Over oiled K&N's?
« on: September 14, 2010, 06:27:46 AM »
If you over-oil your K&N filters, What should you do?  Anything short of cleaning completely and re-applying?   What are the effects of running with slightly over-saturated pods?  Thanks!
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,564
  • Big ideas....
Re: Over oiled K&N's?
« Reply #1 on: September 14, 2010, 06:38:04 AM »
 Clean them and reoil them. I like the sqeeze bottle as you can control the flow. Lightly oil along each fold top and let it penetrate....it will spread out.
Logged
Owner of the "Million Dollar CB"

Offline jessezm

  • '77 cb400f cafe build
  • Expert
  • ****
  • Posts: 1,004
  • Always wrenching...
Re: Over oiled K&N's?
« Reply #2 on: September 14, 2010, 06:40:45 AM »
That's what I thought, thanks.  I do have the squeeze packets.  Should I clean with kerosene, gasoline, etc?
Logged

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: Over oiled K&N's?
« Reply #3 on: September 14, 2010, 06:50:05 AM »
I have cleaned mine with some mild spray on engine degreaser,rinsed them with the hose,given them a good shake and let the dry well in the sun and breeze.
Logged

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,564
  • Big ideas....
Re: Over oiled K&N's?
« Reply #4 on: September 14, 2010, 06:58:52 AM »
I have used the the K&N Cleaner and Waterless Hand Cleaner (NO PUMICE!!) Goop etc. The hand cleaner is cheap. Do not use any solvents/fuels etc. Let them air dry....do not use a hair dryer or throw them in the dryer (I've seen it) ::) ::)
Logged
Owner of the "Million Dollar CB"
Pages: [1]   Go Up
« previous next »