Author Topic: Fuse box melting...Why....Help?  (Read 589 times)

0 Members and 1 Guest are viewing this topic.

Offline try_not_to_trip

  • Full Member
  • *
  • Posts: 21
Fuse box melting...Why....Help?
« on: September 26, 2010, 04:22:53 PM »
So im riding along on my 550 and i stop for gas. I killed it and shut the key off and the lights stayed on. The kickstart still starts it without the key but the electric starter button wont do anything. I pulled the fuse box cover off. It has been melting and idk why. I wiggle the fuse box and the lights shut off. And when I put the key in it works now. The fuse box is super hot. and the back solder on the main power wire is almost gone. 

Offline Queeg

  • insane fuel junkie
  • Enthusiast
  • **
  • Posts: 232
  • OY! with the poodles allready!
    • Queegs Problems
Re: Fuse box melting...Why....Help?
« Reply #1 on: September 26, 2010, 04:25:42 PM »
i think after a while the contacts get dirty and it creates resistance. creating heat. both my 76 550`s had this happen. its only like 7 bucks and the cost of fuses to upgrade to the mini blade type fuse holder.  maybe a hour time if you get all fancy with wiring    it.  fuses are easier to find too now.
guess who?

Offline TwoTired

  • Really Old Timer ...
  • *******
  • Posts: 21,805
Lloyd... (SOHC4 #11 Original Mail List)
72 500, 74 550, 75 550K, 75 550F, 76 550F, 77 550F X2, 78 550K, 77 750F X2, 78 750F, 79CX500, 85 700SC, GL1100

Those that learn from history are doomed to repeat it by those that don't learn from history.

Offline try_not_to_trip

  • Full Member
  • *
  • Posts: 21
Re: Fuse box melting...Why....Help?
« Reply #3 on: September 26, 2010, 04:35:15 PM »
Thanks Yall. Where could i pick up a little fuse junction? auto parts store?