Author Topic: New Motorcyle Day! '74 CB360  (Read 1266 times)

0 Members and 2 Guests are viewing this topic.

Wizard of Wor

  • Guest
New Motorcyle Day! '74 CB360
« on: September 28, 2010, 09:40:57 AM »
Bought this 1974 CB360 this weekend.  All original with rebuilt engine (it has 25 miles on it) and in excellent condition cosmetically and functionally.

Only gripe at this point is the tank inside is a bit rusty and at 3500 RPM in 3rd and 4th gear the bike "pulses" a bit.  






It is really fun to ride and for my first bike  ;D  I think it is pretty cool.  Any suggestions or tips are always appreciated.  Keep in mind that I have very limited mechanical experience but am highly motivated to learn and maintain this little guy.

I'm gonna be banished to the "Other Bikes" forum due to it's non SOHC engine.   :'(  Come visit from time to time won't you?

« Last Edit: September 28, 2010, 10:46:25 AM by Wizard of Wor »

Offline kirkn

  • Expert
  • ****
  • Posts: 1,046
Re: New Motorcyle Day! '74 CB360
« Reply #1 on: September 28, 2010, 03:23:09 PM »
Hey, that's great!

My first bike (back in 1982!!) was also a CB360 - a 1976 model my older brother bought brand new!

Yep, it's an "other bike", but it IS a SOHC - a Single OverHead Cam.  It's just a SOHC-2, not a SOHC-4.

And, not to detract anything at all from THIS site, but here's a good site dedicated to the Honda Twins:  http://www.hondatwins.net/forum/

Good luck, have fun with it, and welcome aboard!

Kirk

Offline gerhed

  • Master
  • *****
  • Posts: 1,801
Re: New Motorcyle Day! '74 CB360
« Reply #2 on: September 29, 2010, 08:14:22 AM »
Here's a tip.

Pull the engine out of the frame and stick it in a
frame made of Kindorf.

Just kidding.

Beautiful bike!

pic of my '74 CB360 attached

click the pic
« Last Edit: September 29, 2010, 08:16:13 AM by gerhed »
Rides: 75 CB750F, 48 Indian Chief, 67 Triumph TR6, 63Honda CA95
          83 XL600R in CB360 Frame
          3-wheel electric tilting cycle

Wizard of Wor

  • Guest
Re: New Motorcyle Day! '74 CB360
« Reply #3 on: September 29, 2010, 08:22:38 AM »
Here's a tip.

Pull the engine out of the frame and stick it in a
frame made of Kindorf.

Just kidding.

Beautiful bike!

pic of my '74 CB360 attached

click the pic

HA!  That thing is great!  I like how you positioned the gas tank for maximum aerodynamic effect.   ;D

Thanks for the kind words.

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: New Motorcyle Day! '74 CB360
« Reply #4 on: September 29, 2010, 02:32:42 PM »
Nice bike.  there are a few here on the site.   3 here local alone.    When they rebuilt the engine I would hope they did the upgraded camchain tensioner.
18 grand and 18 miles dont make you a biker

Wizard of Wor

  • Guest
Re: New Motorcyle Day! '74 CB360
« Reply #5 on: September 29, 2010, 03:40:34 PM »
Nice bike.  there are a few here on the site.   3 here local alone.    When they rebuilt the engine I would hope they did the upgraded camchain tensioner.

The engine does have the punch mark by the s/n so there's that.  I hope they did it too.

Offline cb650

  • Old Timer
  • ******
  • Posts: 3,864
Re: New Motorcyle Day! '74 CB360
« Reply #6 on: September 29, 2010, 04:12:50 PM »
Cool.   Here is a pic of mine.   More in the gallery.       http://gallery.sohc4.net/main.php?g2_itemId=311900
18 grand and 18 miles dont make you a biker

Offline bparro

  • Full Member
  • *
  • Posts: 11
Re: New Motorcyle Day! '74 CB360
« Reply #7 on: September 29, 2010, 06:22:34 PM »
I have a 1975 360t and it is my first bike also! I had a tear in one of the carb diaphrams and the carb floats were about 26mm instead of the stock 18.5mm! It runs great now.