« previous next »
Pages: [1]   Go Down

Author Topic: Looking for ring source-CB750 S-2 (61.5mm)  (Read 843 times)

0 Members and 1 Guest are viewing this topic.

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Looking for ring source-CB750 S-2 (61.5mm)
« on: September 28, 2010, 01:49:17 PM »
Hello:
Someone had this same request not too long ago and someone else offered up a name. I've done a search but can't come up with it.

Did a Google on custom piston rings and got Precisionrings.com here in Indy but they don't do motorcycles.

Anyone remember or know of the source of which I speak?

Of course I haven't tried the obvious OEM or eBay, I'm going there now. Jeesh.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline cavebear

  • Enthusiast
  • **
  • Posts: 199
Re: Looking for ring source-CB750 S-2 (61.5mm)
« Reply #1 on: October 03, 2010, 08:39:22 AM »
Don't know the name from before but I'd contact www.totalseal.com. They make gapless rings and are among the best around.
Logged
1975 MotoMartin 836cc
1976 Rickman 1150cc Turbo
1977 Seeley 890cc + 1/4 stroke
3 parts bikes,1970K0 to 1978ss

Get paid to do it,it's work; pay to do it,it's a hobby

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Looking for ring source-CB750 S-2 (61.5mm)
« Reply #2 on: October 03, 2010, 09:36:29 AM »
Quote from: cavebear on October 03, 2010, 08:39:22 AM
Don't know the name from before but I'd contact www.totalseal.com. They make gapless rings and are among the best around.
BINGO (I think)

I think that was the name, thanks!
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline KB02

  • Take it easy there, Sonny, I'm an
  • Old Timer
  • ******
  • Posts: 3,760
Re: Looking for ring source-CB750 S-2 (61.5mm)
« Reply #3 on: October 04, 2010, 03:51:44 AM »
Yeah, I got a totalseal second ring in my 850 engine. An internal combustion engine is an internal combustion engine. If they have a ring the right size, you'll be all set.
Logged
1978 CB750K Project
2000 Ducati ST2
...and a pedal bike

Join the AMA today!!

My project thread Part I: K8 Project "Parts Bike"
My project thread Part II: Finishing (yeah, right) touches on Project "Parts Bike"
Pages: [1]   Go Up
« previous next »