Author Topic: Help: 1976 Honda CB550F SS  (Read 670 times)

0 Members and 1 Guest are viewing this topic.

Offline Joules

  • Full Member
  • *
  • Posts: 3
Help: 1976 Honda CB550F SS
« on: October 17, 2010, 04:10:36 PM »
I have just started to do a winter project on a 1976 Honda CB550F SS.

The previous owner had been trying to get it running for a year or so. Before I start any really costly(?) work I am stripping down the carbs, checking ignition etc. Really I am starting with a good engine service to get her running before making any more expensive cosmetic work.

The carbs were quite nasty, but cleaned them up and ordered rebuild kits. I started to line up all of the components and found some parts missing. (I don't think I lost them!)

Is it possible to get the 'little' 'cups' (best description I can give) that go on the end of the springs that grip the actuating arms? There is also one felt spindle washer missing.

Any ideas on sourcing them without spending a fortune?

Offline sandbarsurfer

  • Full Member
  • *
  • Posts: 35
Re: Help: 1976 Honda CB550F SS
« Reply #1 on: October 17, 2010, 06:42:06 PM »
I have the same bike and wondering where you ordered your rebuild kits from? Is it a full kit or just gaskets?

Offline fastbroshi

  • Puppet
  • Old Timer
  • ******
  • Posts: 2,645
Re: Help: 1976 Honda CB550F SS
« Reply #2 on: October 17, 2010, 08:52:24 PM »
Go to this link or your Honda mc dealer of choice and look at a parts fiche.  If you can save a picture of what you need to help give us a better idea of what you're looking for I'm sure someone will chime in.

http://www.allambsdallashonda.com/fiche_select.asp

Just call me Timmaaaaay!!!

Offline Frostyboy

  • Retired: Never was an
  • Expert
  • ****
  • Posts: 1,227
  • Circa 1951
Re: Help: 1976 Honda CB550F SS
« Reply #3 on: October 17, 2010, 10:32:35 PM »
I'm pretty sure it's either of these that you're looking for. (see pic). Even if they were available from Honda you'd have to buy a holder set or an arm set & one of 'em is listed $238.
I think you'd be better off finding a second rack somewhere & lifting the part from that.
Last year I joined a support group for procrastinators.
We haven't met yet.
[CB550F1]