« previous next »
Pages: [1]   Go Down

Author Topic: Russ Collins (RC) 70's Headers for sale?  (Read 2962 times)

0 Members and 1 Guest are viewing this topic.

Offline Hannibal Smith

  • 3rd Grade Dropout
  • Hot Shot
  • ***
  • Posts: 502
Russ Collins (RC) 70's Headers for sale?
« on: November 19, 2010, 04:45:12 PM »
I just aquired a set of RC Engineering headers from thr 70's in good condition that appear to be for the CB750..........

Approx, 12.250" C/C on outer 2 pipes and 5.1" C/C on the 2 inner.

Head tubes are all parallel, don't know if it is for a 750, all I know is that it doesn't fit my 550-

Also, the configuration would force you to run a plate with lines to an oil cooler/remote filter it seems...The header pipes are tight in the middle-

Can (silencer) is chopped just aft of the collector about 4", but besides some small dings on the underside of the collector (I was going to Mig) it seems 100% serviceable.

Anybody interested? If they are in fact 750 headers-

If the measurements sound CB750 I will take some pics-

Dents are not as bad as they appear, but they are there. The headers feel very heavy duty, and I have the RC can with baffle. I don't need more stuff around-
« Last Edit: November 20, 2010, 09:55:13 AM by Hannibal Smith »
Logged
Follow my build "P38 Racer" in Project section

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Russ Collins (RC) 70's Headers for sale?
« Reply #1 on: November 19, 2010, 07:11:45 PM »
Please, pics.
Logged

Offline 754

  • Really Old Timer ...
  • *******
  • Posts: 29,058
Re: Russ Collins (RC) 70's Headers for sale?
« Reply #2 on: November 19, 2010, 08:50:09 PM »
750 has inclined cylinder, 500 is straight up. 750 mounting flanges are splayed 500 are all straight across..

 I think they made early and late versions, and yes the pipes look quite symetrical.

 Man I would love a set but  its too tight right now.
« Last Edit: November 20, 2010, 08:58:26 AM by 754 »
Logged
Maker of the WELDLESS 750 Frame Kit
dodogas99@gmail.com
Kelowna B.C.       Canada

My next bike will be a ..ANFOB.....

It's All part of the ADVENTURE...

73 836cc.. Green, had it for 3 decades!!
Lost quite a few CB 750's along the way

Offline BLUE71TURBO

  • Master
  • *****
  • Posts: 1,849
Re: Russ Collins (RC) 70's Headers for sale?
« Reply #3 on: November 19, 2010, 09:15:41 PM »
 Sounds like a kawi header.   :-\
Logged
Remember; Before you can be old and wise, you must first be young and stupid !

srook

  • Guest
Re: Russ Collins (RC) 70's Headers for sale?
« Reply #4 on: November 20, 2010, 08:48:57 AM »
The RC Engineering pipe for the CB750 has alot of room around the oil filter.  This is a pic of an RC Engineering exhaust for the CB750.  This bike had a Lockhart oil cooler on it and you can see how much room there still is around the oil filter.  I ended up throwing these pipes out during a move.  I posted them on this board many years ago for sale and no one wanted them.  Funny how times change. 



Scott
Logged

Offline MCRider

  • Such is the life of a
  • Really Old Timer ...
  • *******
  • Posts: 14,376
  • Today's Lesson: One good turn deserves another.
Re: Russ Collins (RC) 70's Headers for sale?
« Reply #5 on: November 20, 2010, 02:13:09 PM »
Gotta agree, its not CB750. I saw a lot of those over the years. They were "domesticated" performance pipes meaning the access to oil filter was unimpeded and also use of centerstand, tho that is not discussed so far.
Logged
Ride Safe:
Ron
1988 NT650 HawkGT;  1978 CB400 Hawk;  1975 CB750F -Free Bird; 1968 CB77 Super Hawk -Ticker;  Phaedrus 1972 CB750K2- Build Thread
"Sometimes the light's all shining on me, other times I can barely see, lately it appears to me, what a long, strange trip its been."

Offline matost

  • Full Member
  • *
  • Posts: 3
Re: Russ Collins (RC) 70's Headers for sale?
« Reply #6 on: November 23, 2010, 12:12:07 PM »
This is my Cb with a RC system
Logged
Pages: [1]   Go Up
« previous next »