« previous next »
Pages: [1]   Go Down

Author Topic: Forks for 76F  (Read 1010 times)

0 Members and 1 Guest are viewing this topic.

Offline clintinga

  • Full Member
  • *
  • Posts: 39
Forks for 76F
« on: March 12, 2006, 10:45:53 AM »
Hello guys, I am in need of some help.  I need some measurements of the fork.  Specifically- from the bottom of the triple tree to the top of the dust seal- for a stock 1976 750F or K or A if they are the same.  I am trying to figure out if the tubes on my bike are extended or not.  Any and all help will be greatly appreciated and if they are extended, I will have a set of tubes and springs for sale if anyone is interested? 

Thanks,

Clint
Logged

Offline ofreen

  • Old Timer
  • ******
  • Posts: 4,216
Re: Forks for 76F
« Reply #1 on: March 12, 2006, 04:55:31 PM »
On my '75 750F, it is 6.25 inches from the top of the dust seal to the bottom of the lower clamp.  That is with the fork fully extended.
Logged
Greg
'75 CB750F

"I would rather have questions I cannot answer than answers I cannot question." - Dr. Wei-Hock Soon

Offline clintinga

  • Full Member
  • *
  • Posts: 39
Re: Forks for 76F
« Reply #2 on: March 12, 2006, 05:58:49 PM »
Thank you Ofreen :) :) :)  The measurement on my bike is 12 1/2"!!!  That is with the bike off the ground.  So if anyone wants to trade the longer tubes and springs with stock length tubes and springs I will be glad to swap.  Just send me a message if anyone is interested and wants pics.

Thanks again Ofreen,

Clint
Logged

Offline ofreen

  • Old Timer
  • ******
  • Posts: 4,216
Re: Forks for 76F
« Reply #3 on: March 12, 2006, 06:50:09 PM »
You're welcome.
Logged
Greg
'75 CB750F

"I would rather have questions I cannot answer than answers I cannot question." - Dr. Wei-Hock Soon
Pages: [1]   Go Up
« previous next »