Topic: Four Stroke engine with no valves.

[dave500]

i want to know why ?zz top is riding around holding a cricket bat out the window?

[Feliks]

Here, the current version of the flathead engine

http://en.wikipedia.org/wiki/Flathead_engine

And here is my version, but strangely drawn ..



The wikipedia is written with the maximum degree of pairing can get a 7: 1 And this is the fundamental flaw in the solution. Therefore, this low level of compression is because the valves need to have a place in the head to be able to go in and open up. In my constructs, valves (pistons) opening up, regress to the crankcase, so the head can be completely flat, without going into the notches on the valves. With a completely flat head, the compression ratio we receive in my design, possible 27: 1 It is a circuit are adequate for spontaneous combustion - diesel engine, which takes about 18: 1 compression ratio. So you can make the First Diesel Engine in the World with flat head ....



Also will not need to divide the block and heads, because my valves (pistons) can be loaded also from the crankcase, rather than the traditional valves from the head, so when the engine submission is possible in this way, the division heads and engine block becomes redundant. You can perform when the engine entirely from one piece, except for very an emergency head gasket and bolt heads that secure critical










http://video.search.yahoo.com/video/play?p=4+stroke+engine&vid=07311832032500ca275c02e914981f45&l=3%3A40&turl=http%3A%2F%2Fts4.mm.bing.net%2Fth%3Fid%3DV.4540610492893571%26pid%3D15.1&rurl=http%3A%2F%2Fwww.youtube.com%2Fwatch%3Fv%3Diu9LosA7s8c&tit=4+Stroke+Engine&c=28&sigr=11amfobud&ct=p&pstcat=lifestyle&age=0&fr=onesearch&tt=b


So more or less look like the block of the world's first diesel ...






Andrew 

[Feliks]

i want to know why ?zz top is riding around holding a cricket bat out the window?

Here, the first success - Ideal working prototype Windmill Red Baron .. Because at the age of 14 years well done flying models, these skills are to this day. Despite the efforts of various forces that my budget was very limited, I made a perfectly working prototype of the "windmill" but it declared its materials $ 20, for up to a budget can now have the .. Balsa, Japanese paper, Cellon paint, some tape and heat shrink ...
But I built a perfectly working prototp, that shows that, however, so you can produce energy according to my idea .. ...









Research carried out in a moving car mate, with bowed glass in the door .... excellent wind tunnel... :rolleyes:

Redbaron2

Andrew

NACA-FELIX

[dave500]

so thats why jesus just left chicago?

[Bailgang]

  ?

All those long words got you wishing you had a dictionary handy Dave? Don't worry just have yourself a few strong drinks, sit back, relax and it'll all come to ya. 

Would you like to interpret that, i didn't see any long words at all....?

I'm just teasing with Dave that's all. 

[dave500]

and im just teasing with the nutty professor?

[Feliks]

so thats why jesus just left chicago?

Well it was such a coincidence ... He returned to the Polish, the two month holiday .. He got two months leave in its electronic work .. I got the job: He wanted to arrange things all the formalities passport for all women Skaldi team to be able to go to Chicago, because you guys are already bored .. I came to the Polish unless November 29, 1981 year. Before we got used to the time change, That One General I figured that since December 13, 1981 will introduce martial law in Poland .... Well, after returning to Chicago moving out now, unfortunately, there could be no, because the forbidden .. Even a few months I could not even make a phone call to Chicago, to colleagues and to work .. Already very bored with colleagues, and one also started to go back to their wives .. I am also in Poland did not have a job because even between cities in Poland could not be to travel freely without special passes ... I'm out of boredom, I got married in June 1983 years my son was born ... (Meantime I made a second prototype SIGNIFICANT new4stroke) I tried with teams also play concerts ... no, and so I was, holding the role of the father well .. ...


Andrew

[Feliks]

No. So thinking about it all, as last I got the idea to ask for compensation for all ... (reparations)
Here is a chek of my work.


 Because I was going to leave even for a minimum of one year for the job, perhaps I could put down $ 10 000 for this year's work .. But I could not fault of their own ...
Now, as if I had invested the money in my company, and other activities, funding, I could have from the capital, let's say, 30% of the profit for the year ... (Maybe I'm not such a big loser and that I did it 
)
Since then, has it been 32 years ... Here I am giving a screenshot of excel, I calculated how much I should now be in the invested capital of $ 10 000 ..



It's incredible, but even more than $ 34 million ...
I asked the Polish lawyer, but I will say that there is no political will to receive such compensation .. And I was just asking how many times the life, funding can start from new?

Andrew

[2wheels]

Looks like it would be good for a stationary engine.  I think it would be large and heavy and very reliable.

I'm not sure about the cost of boring and honing 3 blind holes, but I am not a machinist maybe it would be easy?

[Feliks]

Looks like it would be good for a stationary engine.  I think it would be large and heavy and very reliable.

I'm not sure about the cost of boring and honing 3 blind holes, but I am not a machinist maybe it would be easy?

Yes, once honing such blind holes was not easy. Fortunately, today we have CNC, and practically it is not a problem .. A gain due to lack of massive head gasket. Even today, I was thinking about how long the engine with ceramic pistons could work without any cooling ...

Andrew

[Feliks]

This time, sad a spacer ..

http://en.wikipedia.org/wiki/Alex_Naumik

ALEX "I Love Warszawa"

Andrew

[Feliks]

So now Papa sure you heard right .. Beautiful song Barbra Streisand ...

ALEX "Papa, Can You Hear Me"

[Feliks]

I think that we have come to some stage in the publication of new technical ideas. Although I still have a little to be published, it seems to me that at the moment you need to get to the Philosophy that the publication did not go to waste. So I propose that you read how this Philosophy looks at the present day historical perspective....:rolleyes:

http://en.wikipedia.org/wiki/Creative_destruction

Andrew

[Feliks]

A bit of candles

http://inter-sat.com/atle/AVISOPPSLAG77.html

Alex - Listen to the music 1978


:(

[Feliks]

ALEX "Dream Boy (Big Shot)"



Andrew

[Feliks]

Aleksandra is buried in Kluczbork next to his father in the municipal cemetery.
In Norway, on the death of the most important newspapers write "Dagbladet" and "VG".
She was very devoted to his father, after his death, has released an album entitled "Daddy's child"
Farewell ceremony will be held on Friday, October 11. Funeral Mass will begin at. 11.00 am in the church. Our Lady Help of Christians in Kluczbork. Burial in the municipal cemetery will begin at. 12.00.

ALEX "I Love Warszawa"

[Feliks]

Such a nice picture of Lech Walesa..

http://ballade.no/nmi.nsf/doc/art2004111912043111300526

Andrew

[dave500]

did she invent an engine or something?

[Feliks]

did she invent an engine or something?

It belongs to the department of culture .. Technical Culture of one part of the culture of the new engines. But it's hard work built a highway to the garage, where the engines are created .. Despite the fact that what some one some dung spilled on the highway .. She knew Siberia, just as I am ...
In addition, there was a time that the present invented hairstyle was very much in vogue many Western European countries, and anyone who wanted to have this, I told the hairdresser, teeth he did with the hair to "Alex." So in a sense, something invented ... not everyone appreciates it .. just like my engines also with the culture .. Such a soul mate who unfortunately already gone ..

[Feliks]

here my scan such a disease illustrate how will they move the pistons in my engine in 1981, there was no possibilities of making animation and we had to somehow manage .. and the adoption of a decision which is to be the angle of the upper shaft between the pistons was not easy .. But it turned out, however, the simplest of which is 90 degrees should fulfill its task and so happened .. Exactly the drawing start is: 0 degrees angle of the suction piston, the piston 90 degrees exhaust (the figure is badly) and the main piston 80 degrees ..



Here how the work ..




Andrew

[Feliks]

That can see that the engine of V 8, even a model can not btc made ​​entirely of plastic ... cylinders are lined with sheet metal, because the friction of the plastic can lead to heat and rub .. My model of the engine, will not have such defects, and only at these two bearings 6704z will all reaction postponed

Plexiglass V8 engine



Here something similar .. My model will be presented Stephenson Second engine

Working Model of Stephenson's STEAM ENGINE made of GLASS ! Rare!

Second Stephenson

My model will run on compressed air...



Andrew 

[Feliks]

Here, a model project of The Spoon Red Baron Tractor. Human powered Dedalus, a comprehensive Weight about 100 Kg. It has been proved that, at a power of 0.3 Kw can take place before long flights .. Here my project model can be 100 times lighter, or to his same drive just 300 watts / 100 = 3 watts .. I think that such a model will be able to produce up more, so I called him a Tractor, he can still pull a glider behind him ..



Red Baron Windmill

Andrew

[Feliks]

With time on holidays, this Yoda even sent a picture from NASA Simulator, explaining many things ...
Oh yes you can see that the lift force (lift) is three times greater than the resistance (drag) the wings .... The diagram shows that the velocity profile at 25% is almost 3 times higher on average .. The purple line on the graph .. The green line is the wind speed .. Yellow is the speed of the lower side profile .. Wind speed is 15 km / h ... At the start of a profile is almost 50 km / h ... Such profiles should have the Red Baron Windmill (spoon too) ..





If the speed is increased by three times, then by using dual such a system, we can get about 9 times Increased speeds the wind that blows on the system .. it is worthwhile to do so .. Well of course, because in the formula for Velocity windmill power plays up to the third power, it is possible to obtain power .. no examples listed here .. for 5 m / s .. Windmill with a diameter of 100 meters are 2,000 KW us .. Now if we take a larger representation rate 9 times that or 45 m / s, it is already at 10 meters in diameter windmill get 2,300 KW. ie the same windmill is ten times smaller .. the rest of the structure is virtually immobile and will not be higher than 50 meters .. as follows from theoretical calculations.'s say the length of the building is 100 m, which can fit 10 windmills in it .. theoretically get 23 MW at a wind speed of 5 m / s.
But of course we can use the Windmill Red Baron ..




Andrew

[Feliks]

If you do not believe my calculations, it can send a check to the CERN ..:rolleyes:



Andrew

[Feliks]

Please .. How do English-speaking people understand my "spoon efect" .. think a very take it to heart, but probably by my poor english .. I'll have to take a few lessons in English ...

Cake O Matic. 1 man 8 spoons

Andrew