Author Topic: Air Filter & Stack Filter Kit for 550's & 750's / The end, see post #898, pg 36 (Read 200746 times)

hapakev · « **Reply #725 on:** January 20, 2012, 12:31:49 PM »

Sign me up for a set of the early 750 carb stacks in black. What do you require for a deposit on just the stacks? PM me if you would.

SOHC Digger · « **Reply #726 on:** January 20, 2012, 11:47:48 PM »

Hell Yeah, Tintop! Super Stoked!

Tintop · « **Reply #727 on:** January 21, 2012, 05:12:35 PM »

Quote from: Ndstrylgrnrngr on January 20, 2012, 10:10:44 AM

I'll go with black stacks for now, but let me know when you're gonna run a batch of blue ones..
[/quote

Ndstrylgrnrngr - I'm not going to be doing any more colour ones for a bit. The blue ones I had on my 550 discoloured when I got filter oil on them. Currently I have a set of red ones on to see if they react as well (also have some yellow, to try in the spring). So for now, only black will be offered, until I can find a permanent solution.

hapakev - shipping to USA for just stacks should be less than $10. So please Paypal me a deposit of $25 ( brian.robinson7@sympatico.ca ). Once I have them boxed I'll contact you with final total / balance owing.

Grnrngr · « **Reply #728 on:** January 22, 2012, 12:02:12 AM »

Black it is then. Thanks a bunch!!

hapakev · « **Reply #729 on:** January 22, 2012, 12:45:53 AM »

Cool, Thanks. I will get it over to you.

maduncle · « **Reply #730 on:** January 22, 2012, 01:52:24 AM »

Feedback on the antipod set up.

I am running a set I got off Terry and I now love it, my bike is running so sweet on stock carbs with 130 main jets, a 4 into 2 into 1 race header system that finishes in a Lossa Engineering shorty muffler, and the antipod filter set up on the carbs just caps it off so nicely.

This is a great filter set up - if you don't have one then buy one!

IRISHCBRACER · « **Reply #731 on:** January 22, 2012, 08:48:45 PM »

Can someone who has a 550 and this filter set-up please post a side profile picture that shows this filter set-up on the carbs, I would like to see how close/compression the foam filter is against the frame

Cheers!

Big Red · « **Reply #732 on:** January 23, 2012, 04:04:06 PM »

Hello,

Is this setup available for a 78 cb750K?

If so, I'm interested and ready to roll!

Thanks.
Chris

Tintop · « **Reply #733 on:** January 23, 2012, 06:19:15 PM »

If you are using the PD carbs that came on the K, then the answer is yes. They have a larger intake OD than the earlier 750 carbs (2mm), and I supply stacks sized for either version.

CB750R · « **Reply #734 on:** January 23, 2012, 06:46:52 PM »

I can't wait!!!! So stoked to add some stacks and ditch the pods!!!

Grant!

maduncle · « **Reply #735 on:** January 24, 2012, 01:49:44 AM »

Here is the set up fitted to my 1977 CB750F2 - just thought you may want a reference photo on file.

Syscrush · « **Reply #736 on:** January 24, 2012, 08:46:05 AM »

Very nice pic, Maduncle.

maduncle · « **Reply #737 on:** January 24, 2012, 02:22:13 PM »

Thanks Syscrush - it does show how well Tintop's filter set up fits on the bike and suits the overall look.

Tintop · « **Reply #738 on:** January 24, 2012, 06:28:59 PM »

Thanks for posting that maduncle.

Grnrngr · « **Reply #739 on:** January 24, 2012, 09:26:39 PM »

+1 I really like that "built in" saddle bag. Very unique!

IRISHCBRACER · « **Reply #740 on:** January 25, 2012, 03:03:43 PM »

Quote from: IRISHCBRACER on January 22, 2012, 08:48:45 PM

Can someone who has a 550 and this filter set-up please post a side profile picture that shows this filter set-up on the carbs, I would like to see how close/compression the foam filter is against the frame

Cheers!

A close up of the filter next to the frame would be more appreciative

(Side view please)

Tintop · « **Reply #741 on:** January 25, 2012, 05:15:32 PM »

Quote from: IRISHCBRACER on January 25, 2012, 03:03:43 PM

Quote from: IRISHCBRACER on January 22, 2012, 08:48:45 PM
Can someone who has a 550 and this filter set-up please post a side profile picture that shows this filter set-up on the carbs, I would like to see how close/compression the foam filter is against the frame
Cheers!
A close up of the filter next to the frame would be more appreciative (Side view please)

maduncle's is a 750, so there is more room. My 550 is buried in storage. Can anyone out there with a 550 kit take a photo for IRISHRACER?

hapakev · « **Reply #742 on:** January 25, 2012, 05:47:35 PM »

$ sent for early rountops stacks in black. Thanks

IRISHCBRACER · « **Reply #743 on:** January 25, 2012, 08:35:01 PM »

Quote from: Tintop on January 25, 2012, 05:15:32 PM

Quote from: IRISHCBRACER on January 25, 2012, 03:03:43 PM
Quote from: IRISHCBRACER on January 22, 2012, 08:48:45 PM
Can someone who has a 550 and this filter set-up please post a side profile picture that shows this filter set-up on the carbs, I would like to see how close/compression the foam filter is against the frame
Cheers!
A close up of the filter next to the frame would be more appreciative (Side view please)

maduncle's is a 750, so there is more room. My 550 is buried in storage. Can anyone out there with a 550 kit take a photo for IRISHRACER?

Thanks for helping! I hope a 550'er can snap a pic soon

maduncle · « **Reply #744 on:** January 25, 2012, 09:41:10 PM »

A close up of the fitting in a CB750F frame - just as a record in case someone wants to see it.

Big Red · « **Reply #745 on:** January 25, 2012, 10:25:25 PM »

Good Evening,

How do I order?

Final Costs?

Thanks,
Chris
1978 cb750K

Grnrngr · « **Reply #746 on:** January 26, 2012, 11:12:52 AM »

That's totally badass. Thanks a bunch Maduncle and Tintop!! I'm getting started on rebuilding my recently acquired screw tops so they'll be ready to just plug in when it gets here.

Retro Rocket · « **Reply #747 on:** January 26, 2012, 03:50:52 PM »

Quote from: Big Red on January 25, 2012, 10:25:25 PM

Good Evening,

How do I order?

Final Costs?

Thanks,
Chris
1978 cb750K

Hang around Big Red, i am sure Brian will check in soon and help you out.....

Welcome to the forum mate.....

Tintop · « **Reply #748 on:** January 26, 2012, 05:25:09 PM »

An update on the current order, it's in customs!! I should have them shortly, and all the stacks are just about done.

I will still need a couple of days to drill back plates, assemble and pack everything. I'm hoping to have things ready to post the week of Feb 6th. A couple are already paid in full (with thanks), and will be the 1st out the door, so for the rest, time to start getting your final payments organized.

It also looks like there is interest in at least x4 more 750 kits. Because of minimum order quantities, and shipping costs, I need to have at least x8 spoken for. If that happens over the next month, I should be able to supply those in time for spring riding.

Rooster87 · « **Reply #749 on:** January 27, 2012, 09:21:06 AM »

Quote from: maduncle on January 24, 2012, 01:49:44 AM

Here is the set up fitted to my 1977 CB750F2 - just thought you may want a reference photo on file.

[/quot. +2 Maduncle that's a sweet ride you got there and I digg that seat and saddle bag. I wonder if my glock 19 will fit a bag like that? Please give us more pics.

News:

Author Topic: Air Filter & Stack Filter Kit for 550's & 750's / The end, see post #898, pg 36 (Read 200746 times)

maduncle

maduncle

maduncle

maduncle