Author Topic: Air Filter & Stack Filter Kit for 550's & 750's / The end, see post #898, pg 36 (Read 200801 times)

Tintop · « **Reply #550 on:** May 13, 2011, 05:25:12 PM »

Quote from: y2kc0wb0y on May 13, 2011, 09:57:18 AM

Quote from: Tintop on May 12, 2011, 07:24:08 PM
Where do you have the clip set at?

I suspect it's set too high? but I don't know exactly.

Your going to need to know the clip position. That along with the jet sizes (known) will give you your baseline. I've got the needles lifted 1 position, and if I remember correctly, Terry's are in the stock position. Don't take this the wrong way, but I'm kind of glad there's a bike with fueling issues. It will give us all a chance to help you (and us) find the right jetting for your situation, and add to the info data base.

SF · « **Reply #551 on:** May 13, 2011, 06:38:17 PM »

will be looking forward to reading that.....I love the smell of the rubber

Im definitely in for a ride! if ya dont mind a Kawi in the pack

y2kc0wb0y · « **Reply #552 on:** May 14, 2011, 05:02:43 AM »

Quote from: Tintop on May 13, 2011, 05:25:12 PM

Your going to need to know the clip position. That along with the jet sizes (known) will give you your baseline. I've got the needles lifted 1 position, and if I remember correctly, Terry's are in the stock position. Don't take this the wrong way, but I'm kind of glad there's a bike with fueling issues. It will give us all a chance to help you (and us) find the right jetting for your situation, and add to the info data base.

That sounds like a great idea. I'll leave everything as it is right now and get some pre-filter (or with pods) data for us and we can go from there. Then we can start messing with the jets and needle height to see what works once your filter/stacks solution is installed. Maybe we should start another thread?

Tintop · « **Reply #553 on:** May 14, 2011, 07:06:41 AM »

Quote from: y2kc0wb0y on May 14, 2011, 05:02:43 AM

Quote from: Tintop on May 13, 2011, 05:25:12 PM
Your going to need to know the clip position. That along with the jet sizes (known) will give you your baseline. I've got the needles lifted 1 position, and if I remember correctly, Terry's are in the stock position. Don't take this the wrong way, but I'm kind of glad there's a bike with fueling issues. It will give us all a chance to help you (and us) find the right jetting for your situation, and add to the info data base.

That sounds like a great idea. I'll leave everything as it is right now and get some pre-filter (or with pods) data for us and we can go from there. Then we can start messing with the jets and needle height to see what works once your filter/stacks solution is installed. Maybe we should start another thread?

A jetting thread for the filter kit is something I'm planning on starting. I would like to be purely informational though, and keep the 'chatter' in this thread.

brah pitt · « **Reply #554 on:** May 14, 2011, 08:39:07 AM »

payment sent! thanks !

Tintop · « **Reply #555 on:** May 14, 2011, 11:00:07 AM »

Quote from: brah pitt on May 14, 2011, 08:39:07 AM

payment sent! thanks !

And rec'd - thank you, will post on Monday.

Tintop · « **Reply #556 on:** May 15, 2011, 07:27:08 PM »

Just rec'd these photos of the 750 PD stacks. They ship to me tomorrow, along with my PD carbs they were modeled on.

Those red stacks of wannabridin's look great.

wannabridin · « **Reply #557 on:** May 15, 2011, 09:36:34 PM »

man those DO look great!!! very bright like the red i'm going to paint things!! can't wait to get them, even though i'm not there with the build yet...

(currently battling classic mustang engine issues...)

Tintop · « **Reply #558 on:** May 20, 2011, 05:58:25 PM »

Just thought I would bump this, and ask how many have rec'd their kits.

Kong · « **Reply #559 on:** May 25, 2011, 06:24:23 AM »

Brian,

Mine arrived (in northern West Virginia) yesterday afternoon. It did not appear to have been opened up, the filter element itself was still in its sealed bag. Very nice!

odiewan · « **Reply #560 on:** May 25, 2011, 02:50:31 PM »

I got mine kit on Monday or so.
Just put it on last night. Went on with very little fuss.

Didn't ride it, but while just blipping the throttle, it feels smoother.

Going to ride it around after work today.

Syscrush · « **Reply #561 on:** May 25, 2011, 03:17:38 PM »

Quote from: odiewan on May 25, 2011, 02:50:31 PM

Didn't ride it, but while just blipping the throttle, it feels smoother.

Smoother than pods, or smoother than the stock airbox?

Tintop · « **Reply #562 on:** May 25, 2011, 03:24:10 PM »

Quote from: Kong on May 25, 2011, 06:24:23 AM

Brian,

Mine arrived (in northern West Virginia) yesterday afternoon. It did not appear to have been opened up, the filter element itself was still in its sealed bag. Very nice!

Glad to it arrived unscathed Kong. Didn't think they would bother opening it; but does it glow in the dark after Homeland scanned it.

Tintop · « **Reply #563 on:** May 25, 2011, 03:26:15 PM »

Quote from: Syscrush on May 25, 2011, 03:17:38 PM

Quote from: odiewan on May 25, 2011, 02:50:31 PM
Didn't ride it, but while just blipping the throttle, it feels smoother.
Smoother than pods, or smoother than the stock airbox?

And the answer is? Keep us posted odiewan.

odiewan · « **Reply #564 on:** May 25, 2011, 03:50:24 PM »

Doh!

Good point.

Smoother that pods, but that's not a surprise.

I'll post after I ride it around. I'm thinking of doing a dyno run, since I have a before curve to compare it to.

Quote from: Tintop on May 25, 2011, 03:26:15 PM

Quote from: Syscrush on May 25, 2011, 03:17:38 PM
Quote from: odiewan on May 25, 2011, 02:50:31 PM
Didn't ride it, but while just blipping the throttle, it feels smoother.
Smoother than pods, or smoother than the stock airbox?

And the answer is? Keep us posted odiewan.

Tintop · « **Reply #565 on:** May 25, 2011, 06:03:57 PM »

Now that would be excellent. I'll email you. - tt

Syscrush · « **Reply #566 on:** May 25, 2011, 06:04:45 PM »

OK Tinner - I've started shopping for parts and I'm starting to feel left out here. You got a set left for a brother on a 550 who wants black stacks?

Tintop · « **Reply #567 on:** May 25, 2011, 06:11:14 PM »

Quote from: Syscrush on May 25, 2011, 06:04:45 PM

OK Tinner - I've started shopping for parts and I'm starting to feel left out here. You got a set left for a brother on a 550 who wants black stacks?

I have 550 filters, and am just putting the next stack order together. Given your bike is......

, I don't think you are in a massive rush.

3/4 weeks OK?

Syscrush · « **Reply #568 on:** May 25, 2011, 07:42:20 PM »

Quote from: Tintop on May 25, 2011, 06:11:14 PM

I have 550 filters, and am just putting the next stack order together. Given your bike is...... , I don't think you are in a massive rush. 3/4 weeks OK?

Anyone who's got a runner can skip ahead of me in the queue as long as I get a set eventually. Frame mods will hopefully happen over the winter, and I'd like to have the filter then.

odiewan · « **Reply #569 on:** May 26, 2011, 11:16:36 AM »

Rode the bike around last night. Compared to the pods, this is much nicer. A lot smoother off idle. Couldn't really feel that much difference in outright power as measured by the butt-dyno, but I am planning on doing a dyno run tomorrow to see how she runs.

Will post when I get some data.

xsmooth69x · « **Reply #570 on:** May 26, 2011, 12:30:46 PM »

im sorry but can i see what this look like on a bike. there might have been picture posted but i dont want to look through 23 pages

thanks

Tintop · « **Reply #571 on:** May 26, 2011, 02:07:06 PM »

If you go to page 22 of my 550 cafe build, post #538, there are pictures (by ffjmoore) of the filter on my 550.

Syscrush · « **Reply #572 on:** May 26, 2011, 02:17:11 PM »

Quote from: Tintop on May 26, 2011, 02:07:06 PM

If you go to page 22 of my 550 cafe build, post #538, there are pictures (by ffjmoore) of the filter on my 550.

Here's a link to save some hunting.

xsmooth69x · « **Reply #573 on:** May 26, 2011, 02:35:10 PM »

Quote from: Syscrush on May 26, 2011, 02:17:11 PM

Quote from: Tintop on May 26, 2011, 02:07:06 PM
If you go to page 22 of my 550 cafe build, post #538, there are pictures (by ffjmoore) of the filter on my 550.
Here's a link to save some hunting.

i love links

this is really really cool and you sell this for the cb550. does the bike need to be re-jetted like pod filters? have you done any dyno'd with this filter on?

Tintop · « **Reply #574 on:** May 26, 2011, 03:24:47 PM »

Quote from: xsmooth69x on May 26, 2011, 02:35:10 PM

Quote from: Syscrush on May 26, 2011, 02:17:11 PM
Quote from: Tintop on May 26, 2011, 02:07:06 PM
If you go to page 22 of my 550 cafe build, post #538, there are pictures (by ffjmoore) of the filter on my 550.
Here's a link to save some hunting.

i love links

this is really really cool and you sell this for the cb550. does the bike need to be re-jetted like pod filters? have you done any dyno'd with this filter on?

Yes to re jetting, simply because the engine is getting more air. As for dyno'ing, Odiewan has done his 750 with pods, and is going to re-do it with the filter kit. Should make for an interesting comparison. He's already posted some 'butt dyno' results.

News:

Author Topic: Air Filter & Stack Filter Kit for 550's & 750's / The end, see post #898, pg 36 (Read 200801 times)