Author Topic: Air Filter & Stack Filter Kit for 550's & 750's / The end, see post #898, pg 36 (Read 200782 times)

maduncle · « **Reply #650 on:** October 07, 2011, 04:10:23 AM »

Well - Terry put me on to this thread as the possible answer to my unruly 750 and I think he was right.

Lucky for me I live 15 minutes from Terry so I can call up and see the set up on a bike and running.

Subscribed and keen.

voxonda · « **Reply #651 on:** October 12, 2011, 01:59:04 PM »

Today, at last, had a moment to mount the filterkit on my racebike. Because it is going on the streets it's going to need filtration. Man, it flew on in a blink of an eye. No hassle, nothing. So far so good. Will take her out on the street and give feedback on how she behaves. But it all looks promising. here some snapshots, with cellular, to give a impression.

Enough room to mount even with my, somewhat manly -10, oillines.

Thanks to Brian for his efforts.

Cheers, Rob

Tintop · « **Reply #652 on:** October 12, 2011, 02:25:58 PM »

Thanks for posting the photos Rob. Looking forward to hearing how everything works on the street.

Retro Rocket · « **Reply #653 on:** October 12, 2011, 02:42:51 PM »

Quote from: Tintop on October 12, 2011, 02:25:58 PM

Thanks for posting the photos Rob. Looking forward to hearing how everything works on the street.

+1

thrutheframe · « **Reply #654 on:** October 16, 2011, 07:29:30 AM »

Much interest here, Im keeping my 750 stock but I already cut off the stock air box on my 650 without know about the tuning issues that I would encounter later. I'm almost to the point where I am ready to mount my carbs so I might have to check this out further.

srbakker · « **Reply #655 on:** October 17, 2011, 06:40:55 AM »

Well, I sent my downpayment for a black kit for my K5 - hope I'm in time for the christmas batch!

Scott

Tintop · « **Reply #656 on:** October 18, 2011, 06:03:46 AM »

Quote from: srbakker on October 17, 2011, 06:40:55 AM

Well, I sent my downpayment for a black kit for my K5 - hope I'm in time for the christmas batch!

Scott

Deposit rec'd Scott, along with syscrush's. Your both on the list for the next order.

65Ch3v3LL3 · « **Reply #657 on:** October 18, 2011, 06:26:50 AM »

Tintop,
I received mine I just forgot to let ya know. We are working on CNCing some adapter plates and velocity stacks to mount to your filter and the 600RR throttle bodies. It should work out well on the 650. thanks for your help.

Syscrush · « **Reply #658 on:** October 18, 2011, 07:00:26 AM »

Quote from: Tintop on October 18, 2011, 06:03:46 AM

Deposit rec'd Scott, along with syscrush's. Your both on the list for the next order.

I was drunk when I sent that and I don't think I stated the color or year. I'll get back to ya.

Tintop · « **Reply #659 on:** November 03, 2011, 05:12:48 PM »

It's been a while since I posted.

I'm going to be placing the next filter order Sunday evening. It will be a much smaller quantity than the first, as I think the initial demand is filled. This order, and future ones will be what I have orders for, plus a couple of extras in each size.

I'm hoping to have these in by Christmas, and the next bunch will be in the spring. So if you have any questions, now is the time to ask, as I don't want to disappoint anyone.

brandEn · « **Reply #660 on:** November 03, 2011, 05:54:10 PM »

When you gonna make some to fit CR carbs?

Retro Rocket · « **Reply #661 on:** November 03, 2011, 08:17:50 PM »

And the RS34's.....

orkid1989 · « **Reply #662 on:** November 03, 2011, 11:40:29 PM »

cant wait to get my set

orkid1989 · « **Reply #663 on:** November 16, 2011, 08:48:47 PM »

I'm looking at making up some molds for the velocity stacks for other carbs like the CR's and the Mikuni's and whatever else people are running. this was more people can use this kit. i was wondering if anyone has the measurements of the intake (diameter and length) so i can start making some mockups of the velocity stacks.

Retro Rocket · « **Reply #664 on:** November 16, 2011, 09:26:43 PM »

Quote from: orkid1989 on November 16, 2011, 08:48:47 PM

I'm looking at making up some molds for the velocity stacks for other carbs like the CR's and the Mikuni's and whatever else people are running. this was more people can use this kit. i was wondering if anyone has the measurements of the intake (diameter and length) so i can start making some mockups of the velocity stacks.

That would be awesome, i was thinking of buying 5 stacks off tintop and using the spare one to cut strips out of, to make the stock sized ones fit the Mikuni's..... Would have been doable but no need to if you are going to make us some....

MRieck has some RS34 Mikuni's and the equipment to measure them...

orkid1989 · « **Reply #665 on:** November 16, 2011, 10:08:14 PM »

Sweet! And what is the other common carb or does everyone pretty much run the rs34's?

Retro Rocket · « **Reply #666 on:** November 16, 2011, 11:07:48 PM »

Quote from: orkid1989 on November 16, 2011, 10:08:14 PM

Sweet! And what is the other common carb or does everyone pretty much run the rs34's?

CR29 Keihins.....

If i can get these stacks for the RS34's i might just make some mods to a stock airbox and see if i can make that work as well.....

orkid1989 · « **Reply #667 on:** November 17, 2011, 04:25:41 PM »

Quote from: Retro Rocket on November 16, 2011, 11:07:48 PM

Quote from: orkid1989 on November 16, 2011, 10:08:14 PM
Sweet! And what is the other common carb or does everyone pretty much run the rs34's?

CR29 Keihins..... If i can get these stacks for the RS34's i might just make some mods to a stock airbox and see if i can make that work as well.....

that would probably work too. the only problem is that (at least for my bike) from what i can see the tube on the stock air cleaners mount very close to the carbs and on this setup it mounts at the end of the velocity stack

but also i have never had an airbox so i am not positive. i could see about making some stacks that will fit the stock boxes (with modifications) but that would take alot more measurements. good idea though. any chance i can get a show of hands of people who are interested in the kit for RS34's?

Retro Rocket · « **Reply #668 on:** November 17, 2011, 04:50:46 PM »

I'm in....

Syscrush · « **Reply #669 on:** November 17, 2011, 07:05:26 PM »

You people looking to make knock-offs of TT's design for other carbs might want to see about getting his blessing or something...

orkid1989 · « **Reply #670 on:** November 17, 2011, 07:46:38 PM »

not making a knock off. been talking with him about it. mostly want to check and make sure their is enough people who would want them seeing as it will cost roughly $200 just to make the molds for the velocity stacks. dont want to waste my money and time if nobody would be interested.

orkid1989 · « **Reply #671 on:** November 17, 2011, 07:48:25 PM »

also it is going to be pretty much exactly the same just sightly larger so people with RS34's can buy his kit

Retro Rocket · « **Reply #672 on:** November 17, 2011, 09:58:40 PM »

Quote from: Syscrush on November 17, 2011, 07:05:26 PM

You people looking to make knock-offs of TT's design for other carbs might want to see about getting his blessing or something...

If you had been following you would already know that TT is on board....

Syscrush · « **Reply #673 on:** November 18, 2011, 05:48:30 AM »

Quote from: Retro Rocket on November 17, 2011, 09:58:40 PM

TT is on board....

Good.

I've been following, but when it's a bit here and a bit there I have trouble keeping everything straight.

veloracermike · « **Reply #674 on:** November 18, 2011, 10:03:48 AM »

Any chance that this kit would work on a 350f?

News:

Author Topic: Air Filter & Stack Filter Kit for 550's & 750's / The end, see post #898, pg 36 (Read 200782 times)

maduncle