Author Topic: 1971 CB500: Project "Yokai" - Lots of Pics (Read 37313 times)

Zaipai · « **Reply #75 on:** January 04, 2011, 06:20:05 PM »

Man I don't know. Its very slick tho. I love it. I will keep my eye's peeled and if I see anything on it I will post it here.

.: Scott :.

joshuanagao · « **Reply #76 on:** January 04, 2011, 08:23:49 PM »

Thanks Scott! I really appreciate all your answers to my questions and comments!

Quote from: Zaipai on January 04, 2011, 06:20:05 PM

Man I don't know. Its very slick tho. I love it. I will keep my eye's peeled and if I see anything on it I will post it here.

.: Scott :.

joshuanagao · « **Reply #77 on:** January 04, 2011, 10:09:05 PM »

Anyone know if there is a shop here in the States that sells Tachibana helmets? These helmets are sweet and the website is all in Japanese. If anyone has info on where to get a helmet like this one please let me know.

This is the SMH Legend series that I am looking for.

fastbroshi · « **Reply #78 on:** January 05, 2011, 12:20:06 AM »

Quote from: Syscrush on December 09, 2010, 04:21:29 AM

Quote from: joshuanagao on December 08, 2010, 09:24:58 PM
Quick question. Does anyone know where I can get plugs to plug the intake holes and exhaust? I am just using really tightly packed towels right now but think plugs would probably be easier.
That's what you use - tight packed shop towels.

I've used those rubber cups that go over the ends of chairs. You can usually find them at Lowe's or Home Depot.

Zaipai · « **Reply #79 on:** January 05, 2011, 04:37:44 AM »

Check your local Honda dealer, they can usually order them. Ask about the cost first tho.

.: Scott :.

Syscrush · « **Reply #80 on:** January 05, 2011, 04:56:21 AM »

Quote from: joshuanagao on January 04, 2011, 10:09:05 PM

Anyone know if there is a shop here in the States that sells Tachibana helmets? These helmets are sweet and the website is all in Japanese. If anyone has info on where to get a helmet like this one please let me know.

This is the SMH Legend series that I am looking for.

There's a Japanese seller on eBay selling 'em.

joshuanagao · « **Reply #81 on:** January 06, 2011, 02:23:58 PM »

Got a little done today. Finally got a roller! I was so excited about it that I did a few laps around the garage. Next is to get the engine finished up and back in…then on to the electrical system which I am dreading a little bit.

Also I have a bunch of extra parts that I am selling. Make me an offer if you are interested

Original gas tank with petcock

Rear turn signals along with the bar

Original rear shocks

Rear fender

Original Tachometer

Chain Guard

I also have the original exhaust system if anyone is interested. I don't have any pics of the pipes off but can take some if anyone wants them.

Zaipai · « **Reply #82 on:** January 06, 2011, 08:34:45 PM »

Nice, its looking good. The electrical won't be as bad as you think. Once you dive in.

GL

.: Scott :.

fastbroshi · « **Reply #83 on:** January 06, 2011, 09:29:20 PM »

What tires are those? I'm not familiar with that tread.

joshuanagao · « **Reply #84 on:** January 06, 2011, 09:29:57 PM »

Quick question. Does anyone know the ratios I need for a speedo and tach for a 71 CB500?

Speedo options are 1:2 or 2240:60 and I have a 19in stock front wheel

I'm thinking the tach is 1:7 is that correct?

fastbroshi · « **Reply #85 on:** January 06, 2011, 09:30:46 PM »

I'm 99% sure the ratios are in the FAQ.

joshuanagao · « **Reply #86 on:** January 06, 2011, 09:56:49 PM »

They are IRCs
http://www.bikebandit.com/irc-rs-310-motorcycle-tire
I actually ordered them from a local honda shop and had them installed there. I didn't want to be responsible for dicking up the brand new powdercoat on my rims.

Quote from: fastbroshi on January 06, 2011, 09:29:20 PM

What tires are those? I'm not familiar with that tread.

HedNut · « **Reply #87 on:** January 07, 2011, 05:01:10 AM »

LED's in the headlight is SEXY...specially with those forks dangling underneath....mmmm

Your project is looking great! Electrical turned out good for me, by laying out everything on a board at their proper distances...and wiring it there.... wrapping it...Then bringing it to the bike... when they mated it was like Zeus and a hairy goat making love...awkward yet subtly pleasing.

...I take that back... that's pretty disturbing....haha

Great work man! Keep it up!

HalfFastMoto · « **Reply #88 on:** January 07, 2011, 06:50:00 AM »

Quote from: joshuanagao on January 03, 2011, 09:54:09 PM

Has anyone ever seen a headlight set up like this?

The dude says he put 2 LED strips inside the glass and that they function as running lights only and when you turn the headlight on that they turn off. How difficult would it be to do this? Any ideas of where to start?

Would it be possible to get some more pictures of the headlight? Would be great if we could see a close up with the LEDs turned off.

Thanks

joshuanagao · « **Reply #89 on:** January 07, 2011, 07:46:52 AM »

Sorry, thats the only head on picture I have. I was reading comments on pipeburn and found this link https://brunodesignsart.com/Honda_XR650L_Project.php. I emailed the guy but he hasn't gotten back to me yet. Check out the other pictures though, they may reveal something I missed.

Quote from: HalfFastMoto on January 07, 2011, 06:50:00 AM

Would it be possible to get some more pictures of the headlight? Would be great if we could see a close up with the LEDs turned off.

Thanks

joshuanagao · « **Reply #90 on:** January 08, 2011, 06:27:16 PM »

Anyone know if these are any good?

http://cgi.ebay.com/ebaymotors/Front-Brake-Master-Cylinder-Honda-Nighthawks-CB500-_W0QQcmdZViewItemQQhashZitem3f06328b10QQitemZ270686915344QQptZMotorcyclesQ5fPartsQ5fAccessories

I want a master cylinder that is not attached directly to avoid any leveling problems that would be caused by clubmans.

fastbroshi · « **Reply #91 on:** January 08, 2011, 06:35:07 PM »

Angle of this one looks pretty good. Probably Chinese though.

http://cgi.ebay.com/ebaymotors/NEW-FRONT-BRAKE-MASTER-CYLINDER-FZR400-FZR600-FZ600-/110631614776?pt=Motorcycles_Parts_Accessories&hash=item19c2287938

Tintop · « **Reply #92 on:** January 08, 2011, 06:48:26 PM »

Quote from: fastbroshi on January 08, 2011, 06:35:07 PM

Angle of this one looks pretty good. Probably Chinese though.

http://cgi.ebay.com/ebaymotors/NEW-FRONT-BRAKE-MASTER-CYLINDER-FZR400-FZR600-FZ600-/110631614776?pt=Motorcycles_Parts_Accessories&hash=item19c2287938

That's the one I used on my build. Seems reasonably well made, we'll see how it stands up.

Godffery · « **Reply #93 on:** January 08, 2011, 11:31:06 PM »

If clearance is an issue, you might want to go with something like this:
http://cgi.ebay.com/ebaymotors/H37-Honda-CBR1000RR-2004-Front-Radial-Brake-Master-_W0QQcmdZViewItemQQhashZitem483e72883cQQitemZ310285338684QQptZMotorcyclesQ5fPartsQ5fAccessories
It’s a radial design so the piston faces forward.

Free Booter · « **Reply #94 on:** January 12, 2011, 02:23:27 PM »

Try this:
http://www.youtube.com/watch?v=YqucnKCOR1E

http://www.youtube.com/watch?v=xKE3aqlwOvY

joshuanagao · « **Reply #95 on:** February 05, 2011, 09:49:39 PM »

I got the engine back in a few days ago and finally got around to taking some pictures. Let me know what you think.

New Coils from Z1. Best price that I could find anywhere on the coils and Dyna S.

Engine is looking great. There are smudges that I need to wipe off and I need to clean the excess gasket sealer but other than that I am extremely happy with how it turned out. For anyone wondering I used the Engine paint kit from POR-15

View with the Dyna S.

Mock-up with the old tank to get an idea of what it is gonna look like.

Tintop · « **Reply #96 on:** February 06, 2011, 05:48:31 AM »

+1 on Z1's prices for Dyna stuff.

Feels good doesn't it, when you get the engine back in.

joshuanagao · « **Reply #97 on:** February 07, 2011, 09:53:01 PM »

Pipes are on. I'm waiting for the BCR rearsets so I can get them fully installed. Here are some pics for those of you who love them.

Syscrush · « **Reply #98 on:** February 08, 2011, 04:43:56 AM »

Zaipai · « **Reply #99 on:** February 08, 2011, 05:38:26 AM »

Fantastic!!!

.: Scott :.

News:

Author Topic: 1971 CB500: Project "Yokai" - Lots of Pics (Read 37313 times)