Author Topic: DWMS RACING CB550F SUPER REVERSE PORT! NEW ENGINE COLORS AND PHOTOS! (Read 115379 times)

joeyputt · « **Reply #350 on:** February 10, 2011, 07:57:36 AM »

"No brake makes you look like a dumbass" Hahahaha! I love the honesty here!

Brothers I am sure that even a smaller disc would be fine for how I will be riding, I can not decide on the look that I want. I am going to paint the center of the one rotor today and see what it looks like, I have a really nice six piston caliper, stainless braided line, and a resevoir with a billet cap, I may as well use them if I have them I guess. I will post a photo this afternoon.

scroggins5000 · « **Reply #351 on:** February 10, 2011, 09:25:08 AM »

Quote from: joeyputt on February 10, 2011, 07:57:36 AM

"No brake makes you look like a dumbass" Hahahaha! I love the honesty here!

Brothers I am sure that even a smaller disc would be fine for how I will be riding, I can not decide on the look that I want. I am going to paint the center of the one rotor today and see what it looks like, I have a really nice six piston caliper, stainless braided line, and a resevoir with a billet cap, I may as well use them if I have them I guess. I will post a photo this afternoon.

Sounds nice, can't want to see it.

ivanhoew · « **Reply #352 on:** February 10, 2011, 11:07:49 AM »

Quote from: joeyputt on February 10, 2011, 06:56:22 AM

Quote from: ivanhoew on February 09, 2011, 11:09:34 PM

...also ,the big disc will go well with the turbocharger thats waiting for you down at the breakers

regards
robert

turbocharger waiting at the breaker? I do not understand?

just funnin with you joey , having a silly moment .

joeyputt · « **Reply #353 on:** February 10, 2011, 06:51:41 PM »

Quote from: ivanhoew on February 10, 2011, 11:07:49 AM

Quote from: joeyputt on February 10, 2011, 06:56:22 AM
Quote from: ivanhoew on February 09, 2011, 11:09:34 PM

...also ,the big disc will go well with the turbocharger thats waiting for you down at the breakers

regards
robert

turbocharger waiting at the breaker? I do not understand?

just funnin with you joey , having a silly moment .

I thought you were going to say you had a turbo for me! Hahahaha! There are some members who want me to turbo this bike.

joeyputt · « **Reply #354 on:** February 10, 2011, 07:12:55 PM »

I did not have very much time to work on the bike today but I did paint part of the rotor. I am going to engrave shields that go with the helmets on the engine into the fork lowers and then paint them burnt copper so I thought it would look better if I polished the center of the rotors and then accented them with the burnt copper as well.

Here is the before photo.

I taped it for paint.

Here is the after photo with the burnt copper accent but I still need to polish the center.

Stev-o · « **Reply #355 on:** February 10, 2011, 08:02:38 PM »

turbo turbo turbo!

joeyputt · « **Reply #356 on:** February 10, 2011, 08:10:41 PM »

Quote from: Stev-o on February 10, 2011, 08:02:38 PM

turbo turbo turbo!

Hahahaha! I definately think a turbo would look awesome on the back of the header!

ivanhoew · « **Reply #357 on:** February 11, 2011, 12:26:13 AM »

Quote from: joeyputt on February 10, 2011, 06:51:41 PM

Quote from: ivanhoew on February 10, 2011, 11:07:49 AM
Quote from: joeyputt on February 10, 2011, 06:56:22 AM
Quote from: ivanhoew on February 09, 2011, 11:09:34 PM

...also ,the big disc will go well with the turbocharger thats waiting for you down at the breakers

regards
robert

turbocharger waiting at the breaker? I do not understand?

just funnin with you joey , having a silly moment .

I thought you were going to say you had a turbo for me! Hahahaha! There are some members who want me to turbo this bike.

if you were in this country joe , i could probably get you one .

i used a turbo off 2 litre diesel renault engine ,a t25, on my 500honda engine , and its fine ,so if you can find anything off a 1500 to 2 litre diesel itd work ,should be able to get one for 10 to 20 dollars ?

you save a lot of money on not needing a silencer too! lol.

joeyputt · « **Reply #358 on:** February 11, 2011, 11:19:35 AM »

Brother ivanhoew I am not planning on a turbo for this engine, as cool as it would be I really want to keep this bike as clean as possible and with the carburetors out front it would require a lot of tubing.

ivanhoew · « **Reply #359 on:** February 11, 2011, 11:26:51 PM »

Quote from: joeyputt on February 11, 2011, 11:19:35 AM

Brother ivanhoew I am not planning on a turbo for this engine, as cool as it would be I really want to keep this bike as clean as possible and with the carburetors out front it would require a lot of tubing.

i know joe . that was in cae you contemplate a different path to power lol.

joeyputt · « **Reply #360 on:** February 20, 2011, 03:59:58 PM »

I was very busy in the shop this week so I did not have any extra time to work on the bike but I did get some more framework done last night and today.

Most of you have seen this photo where I converted the frame from a double downtube to a single into double downtubes to make room for the carburetors out front.

Here are the photos from today!

ivanhoew · « **Reply #361 on:** February 21, 2011, 01:02:49 AM »

making progress joey ,well done .

joeyputt · « **Reply #362 on:** February 21, 2011, 08:35:41 PM »

Quote from: ivanhoew on February 21, 2011, 01:02:49 AM

making progress joey ,well done .

Thank you Brother!

I have tried several swingarms that I have here at the shop and nothing is giving me the custom look that I want so I decided yesterday that I would hand build the rear suspension, it is going to take me a little longer but I think it is the only way that I will be happy with it.

I started building it today!

Flying J · « **Reply #363 on:** February 21, 2011, 11:36:26 PM »

Are you going to stick to stock length or how much longer will it be?

let me beat everyone to the punch. if you make it longer it will not handle as well....bla bla bla, its not a performance based bike.

Retro Rocket · « **Reply #364 on:** February 22, 2011, 12:07:42 AM »

Quote from: ffjmoore on February 21, 2011, 11:36:26 PM

Are you going to stick to stock length or how much longer will it be?

let me beat everyone to the punch. if you make it longer it will not handle as well....bla bla bla, its not a performance based bike.

Look at the front of the frame, its all show this one.....

Nice work Joey....

Mick

Syscrush · « **Reply #365 on:** February 22, 2011, 05:32:49 AM »

Looking great!

754 · « **Reply #366 on:** February 22, 2011, 08:37:51 AM »

All show,

... looks pretty rideable to me..

I think some people would be surprised at how many of what they consider "all show" gets ridden pretty long distances to events in some parts of the world.. and how good they actually can be ridden..

Raef · « **Reply #367 on:** February 22, 2011, 09:56:11 AM »

I don't think "all show" was a dig. Some times is better to look marvelous than to be marvelous and other time looks be damned to better perform.

greenjeans · « **Reply #368 on:** February 22, 2011, 12:05:57 PM »

Saw this thread a while back and just got around to reading through it.......my brain hurts.

This site never ceases to amaze me.

Good work Joey - cannot wait until this beast is finished. It will be a head-turner, brain-puzzler for sure.

Spikeybike · « **Reply #369 on:** February 22, 2011, 12:19:45 PM »

Quote from: greenjeans on February 22, 2011, 12:05:57 PM

......It will be a head-turner,...

no man he didn't turn the head around , he's gonna.... oooohhh ... nevermind

Retro Rocket · « **Reply #370 on:** February 22, 2011, 02:55:49 PM »

Quote from: raef on February 22, 2011, 09:56:11 AM

I don't think "all show" was a dig. Some times is better to look marvelous than to be marvelous and other time looks be damned to better perform.

It was a compliment, this bike isn't going to win any races {with corners Frank} but thats not what Joe is building it for... Frank, you ever heard of "corners"....?

Mick

joeyputt · « **Reply #371 on:** February 22, 2011, 07:10:18 PM »

Brothers I can not thank you enough for your continued support of this build!

I decided that as she is starting to look like more of a pro street style bike that she should have a solid hardtail rear frame section. I posted the photos of the section that I built yesterday and today I welded it to the frame and added the rear down tubes as well. I still want to add an underbrace and some other pieces but here is what I got done today!

Stev-o · « **Reply #372 on:** February 22, 2011, 07:14:13 PM »

one word....WOW. Nice work BroJoe.....

754 · « **Reply #373 on:** February 22, 2011, 07:38:07 PM »

Joe, great you got some length to it.. now you can pigtail the exhaust, and have it come out under the rigidarm.. would look really trick..

reply to recent posts;
We have a saying on this continent.. all Show & no Go..
So when I read All Show, that conjurures up a different meaning than say, its a showpiece.. showing some of the work we do..

There are people on here, that as soon as you stray from maximum handling, start knashing their teeth, and telling how you screwed your bike up (NOTE..YOURS..not THEIRS

)

.. different Styles, can still bring Smiles....... 754..

Flying J · « **Reply #374 on:** February 22, 2011, 07:44:42 PM »

Did i miss the part where you made the Modern fork fit the 550 neck? How did you adapt it?

News:

Author Topic: DWMS RACING CB550F SUPER REVERSE PORT! NEW ENGINE COLORS AND PHOTOS! (Read 115379 times)