Topic: gl1000 preload adjusters??

[Phil]

Rob - I would like a set of 37mm pre-load adjusters for my Dresda GL1000 - do you have any left? I don't know how to "PM" but could you email me - philipclark2@mac.com?

[Phil]

Thanks Rob - they are beautiful!!

[voxonda]

Thanks you, Phil for the purchase. Please send me a pic when installed. For promotion.

Cheers mate,

Rob

[KMC]

hello rob.  i'm also interested.  putting a GL1000 front end with progressive springs on friend's '76 CB750 K.  please pm the details.

got a rear excel wheel too.  had both p/c black with silver spokes.  bike is rootbeer metallic with custom solo seat.  out back has one of carpy's swingarms with progressive shocks.  sprocket specialist + new did erv chain.  should be sharp when done.

[DannyBhoy]

HELLO Rob,  I'm in the same boat as Phil as I dont know how to PM. i m going down the GL forks road.   I would also like to purchase a set of you pre load caps,
danospeedshots@Yahoo.oo   or  dan@superiordoorandgatesystems.ca

Im just down the hwy from TinTop in Canada.
Cheers

[Tintop]

HELLO Rob,  I'm in the same boat as Phil as I dont know how to PM. i m going down the GL forks road.   I would also like to purchase a set of you pre load caps,
danospeedshots@Yahoo.oo   or  dan@superiordoorandgatesystems.ca

Im just down the hwy from TinTop in Canada.Cheers

DannyBhoy, are you going to the bike show at the International Centre out at the airport?  Bunch of us are going to meet up there, as I will have the 550 in the show.  Apologies for the hijack.

[voxonda]

HELLO Rob,  I'm in the same boat as Phil as I dont know how to PM. i m going down the GL forks road.   I would also like to purchase a set of you pre load caps,
danospeedshots@Yahoo.oo   or  dan@superiordoorandgatesystems.ca

Im just down the hwy from TinTop in Canada.
Cheers

Hello Dan,

Just emailed you,

Cheers, Rob

[rangelov]

What's with all the secrecy?

Anyone have a photo? 

Are they aluminum or steel?  Are they pretty?  Is the adjuster visible or hidden?  Easy to adjust?

I'm curious about what they look like.  Are they like the earlier fork caps with the slotted screw sticking out of the top?

Or is it something slicker than that?

I would be interested in something like this for my CB750K4.  I am buying new fork tubes, which are shorter than stock.  It would allow adjustability when I try to dial in the front suspension.

[voxonda]

What secrecy?

[Tintop]

Try this - http://www.voxonda.com/2010/index.php?page=shop.product_details&flypage=flypage.tpl&product_id=18&category_id=8&option=com_virtuemart&Itemid=54

I got the silver ones.