Author Topic: Team Southwest - OK, TX, NM - Riders check in here  (Read 81919 times)

0 Members and 1 Guest are viewing this topic.

Offline madmtnmotors

  • When did I get to be a
  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 6,094
  • Sunny Central Florida
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #275 on: March 22, 2011, 02:00:21 PM »
I want to make sure I'm understanding the current thinking.  Essentially, all riders who want to participate will be meeting in Austin, going for a Hill Country ride and then heading home.  Is that the gist of it?

If the Austin area is the closest relay ride stop-off/meeting location to you, then that's where you'll join it.  How far you want to continue on the rest of the ride is entirely up to you.  


Ok, then . . . so there IS an official designated route?  What is it?  I want to know where I might be able to join in before Austin.  There's a lot of planning on my end because of work and my brother's upcoming wedding, so I want to be clear on the moto rally  ;D



If you scroll up to this post (on the previous page):

http://forums.sohc4.net/index.php?topic=81307.msg966992#msg966992


You will find this PRELIMINARY map link:

http://maps.google.com/maps/ms?ie=UTF8&hl=en&msa=0&msid=211361146505888212306.00049eff284c0f0ee67f0&ll=30.54807,-98.302917&spn=1.62495,2.856445&z=9
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline the architect

  • Hot Shot
  • ***
  • Posts: 424
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #276 on: March 22, 2011, 02:40:27 PM »
Yeah, I made that map.  But is sounds like that route was vetoed in the interest of time.  I'm happy to plot a new course if there's a consensus on some sort of route.


I want to make sure I'm understanding the current thinking.  Essentially, all riders who want to participate will be meeting in Austin, going for a Hill Country ride and then heading home.  Is that the gist of it?

If the Austin area is the closest relay ride stop-off/meeting location to you, then that's where you'll join it.  How far you want to continue on the rest of the ride is entirely up to you.  


Ok, then . . . so there IS an official designated route?  What is it?  I want to know where I might be able to join in before Austin.  There's a lot of planning on my end because of work and my brother's upcoming wedding, so I want to be clear on the moto rally  ;D



If you scroll up to this post (on the previous page):

http://forums.sohc4.net/index.php?topic=81307.msg966992#msg966992


You will find this PRELIMINARY map link:

http://maps.google.com/maps/ms?ie=UTF8&hl=en&msa=0&msid=211361146505888212306.00049eff284c0f0ee67f0&ll=30.54807,-98.302917&spn=1.62495,2.856445&z=9
Rider no. 83 on the 2013 SOHC/4 Honda World Tour
Rider no. 228 on the 2012 SOHC/4 Honda World Tour
Rider no. 70 on the 2011 SOHC/4 Honda World Tour

my '75 CB750 cafe build photo documentary:  looking for the Lone Stars is like playing Where's Waldo -- enjoy.
http://www.flickr.com/photos/34828040@N05/sets/72157615892537535/

CB350 twin, rigid meat grinder:
http://www.flickr.com/photos/34828040@N05/sets/72157627005176764/

Blip Workshop
http://www.blipworkshop.com
http://www.facebook.com/blipworkshop

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,309
  • Central Texas
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #277 on: March 22, 2011, 07:19:04 PM »
If we are going to meet in Austin, I suggest on the west side at the intersection of RR 620 & 2222. There is a large parking lot on the SW corner and a store w/gas, drinks and food.
From there, we can take the infamous "Lime Creek Road", one of the premiere roads in the area that snakes along Lake Travis.
There is good camping in this area for the night of 4/20.
Then west on RR 1431 to Marble Falls, this route is on Architects map.
From there, I suggest we hit back roads west along Lake LBJ and then south to Fredericksberg.
Then North past The Enchanted Rock and to Llano and Big Spring.
 

If this route sounds good, please update your map.
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,274
  • Humboldt, AZ
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #278 on: March 22, 2011, 07:32:35 PM »
Architect, you guys coming from Houston might consider trailering your bikes to Austin, so you can get in more relay miles. In other parts of the relay, some people who have to travel 180-200 miles to meet up with Godzilla are taking this approach, plus it never hurts to have a chase/support vehicle along. (unless the water pump pukes, like Vern's did. ;) )
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline madmtnmotors

  • When did I get to be a
  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 6,094
  • Sunny Central Florida
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #279 on: March 23, 2011, 03:42:29 AM »
Yeah, I made that map.

Duh-Ohh! I guess I could have looked at the author... the posts are starting to blend together. Look at all the pretty colors!
TAMTF...


Wilbur



Projects:
"Evolution": http://forums.sohc4.net/index.php?topic=100352.0
"P.O. Debacle": http://forums.sohc4.net/index.php/topic,126692.msg1441661.html#msg1441661
F2/F3 O-rings: http://forums.sohc4.net/index.php?topic=113672.msg1300721#msg1300721
Cam Tower Studs: https://www.mcmaster.com/#93210a017/=t19sgp
Clean up that nasty harness: http://forums.sohc4.net/index.php?topic=137351.msg1549191#msg1549191
http://forums.sohc4.net/index.php/topic,148188.msg1688494.html#msg1688494
http://forums.sohc4.net/index.php/topic,139544.msg1579364.html#msg1579364
                                          
Charging system diagnosis: http://forums.sohc4.net/index.php?topic=1012.msg8345#msg8345
Get the manuals: http://manuals.sohc4.net/cb750k/
The Dragon: http://forums.sohc4.net/index.php?topic=45183.msg1571675#msg1571675
Headlight Switch: http://forums.sohc4.net/index.php?topic=113986.msg1283236#msg1283236
Branden's leak free top end thread: http://forums.sohc4.net/index.php?topic=107040.0
Engine Lifting Made Easy: http://forums.sohc4.net/index.php/topic,58210.msg1684742.html#msg1684742
                                      http://forums.sohc4.net/index.php/topic,100352.msg1675840.html#msg1675840
Static and Dynamic Timing: http://www.hondachopper.com/garage/carb_info/timing/timing1.html
Airbox Gasket Replacement: http://forums.sohc4.net/index.php/topic,114485.msg1290000.html#msg1290000
"Café" : http://forums.sohc4.net/index.php/topic,84697.msg953814.html#msg953814
PD Carb Choke Linkage: http://forums.sohc4.net/index.php/topic,100352.msg1669248.html#msg1669248
                                    http://forums.sohc4.net/index.php/topic,110931.msg1248354.html#msg1248354
                                    http://forums.sohc4.net/index.php/topic,48858.msg515204.html#msg515204
Follow up on your damn posts: http://forums.sohc4.net/index.php/topic,144305.msg1791605.html#msg1791605
Taiwanese Cam Chain Tensioners:  http://forums.sohc4.net/index.php/topic,155043.msg1774841.html#msg1774841
Gumtwo Seat Cover: http://forums.sohc4.net/index.php/topic,164440.msg1897366.html#msg1897366
Primary Drive: http://forums.sohc4.net/index.php/topic,166063.msg1919278.html#msg1919278
Tank Latch: http://forums.sohc4.net/index.php/topic,165975.msg1919495.html#msg1919495
Shorten your forks: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-shorten-forks-td4042465.html DO NOT CUT THE SPRINGS!
Clutch How To: http://vintage-and-classic-honda-s.456789.n3.nabble.com/How-to-change-and-adjust-a-clutch-SOHC-td4040391.html
Late model K7/K8/F2/F3 front sprocket cover removal: http://forums.sohc4.net/index.php/topic,178428.msg2072279.html#msg2072279
630 to 530 conversion: http://forums.sohc4.net/index.php/topic,180710.msg2094423.html#msg2094423

Sent from my Tandy TRS-80!

Offline Coyote13

  • Hot Shot
  • ***
  • Posts: 534
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #280 on: March 23, 2011, 06:58:55 AM »
Architect, you guys coming from Houston might consider trailering your bikes to Austin...


YOU'D BETTER NOT!


BTW guys, this weekend is gonna turn into heavy maintenance for me, #2 started pissing gas everywhere yesterday and #4 has been dripping. Time to reset the floats I suppose.  Timing's off too, gotta track down a connection issue somewhere (which I've tried to find at least ten times and can't. Damned dyna s)

Keep your fingers crossed I can get it all sorted, I'm a bit of a.....noob  :o
'78 CB750K.  Throttle ripper.
'71 CB100.  Grocery getter.
'01 XL883.  Panty dropper. Gone but not forgotten.

Offline motocyconomad

  • Expert
  • ****
  • Posts: 1,401
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #281 on: March 23, 2011, 08:47:15 AM »
ya me and George and maybe 2 more will be looking for the intercept point from the entry into the state as it goes to Austin and where it will leave into NM and if I want to go into NM.

Offline Really?

  • I've come to the conclusion that I AM a
  • Really Old Timer ...
  • *******
  • Posts: 5,276
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #282 on: March 23, 2011, 09:44:39 AM »
Architect, you guys coming from Houston might consider trailering your bikes to Austin...


YOU'D BETTER NOT!


BTW guys, this weekend is gonna turn into heavy maintenance for me, #2 started pissing gas everywhere yesterday and #4 has been dripping. Time to reset the floats I suppose.  Timing's off too, gotta track down a connection issue somewhere (which I've tried to find at least ten times and can't. Damned dyna s)

Keep your fingers crossed I can get it all sorted, I'm a bit of a.....noob  :o

Check the needle and seat for crap.  yes, take the float needle seat out too in case you have stuff building up on top of it.  If it is dirty, make sure the tank filter is good and no crap in the fuel line.

Back to our normally scheduled entertainment.   ;D
I don't have a motorcycle, sold it ('85 Yamaha Venture Royale).  Haven't had a CB750 for over 40 years.

The Wife's Bike - 750K5
The Kid's Bike - 750K3

Offline Coyote13

  • Hot Shot
  • ***
  • Posts: 534
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #283 on: March 23, 2011, 11:02:21 AM »
Thanks for the advice Tipper, and sorry for the momentary thread jack.
'78 CB750K.  Throttle ripper.
'71 CB100.  Grocery getter.
'01 XL883.  Panty dropper. Gone but not forgotten.

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,274
  • Humboldt, AZ
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #284 on: March 23, 2011, 08:25:03 PM »
Architect, you guys coming from Houston might consider trailering your bikes to Austin...


YOU'D BETTER NOT!


Why not?? They have to travel 165 miles before even seeing Godzilla, plus more to get back home, after biding him a fond adieu. It is a RELAY, and the idea is to carry Godzilla through at least every state in the lower 48 and more on an SOHC. In some areas, such as west TX, NM, and AZ, where we have a dire need of riders, any method of extending the range of the available riders should be used. Godzilla can only ride on one bike at a time! ;)
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #285 on: March 24, 2011, 08:25:12 AM »
Hey guys,

I'm trying as hard as I can to have my 75 CB750  roadworthy in time.   Funds are tight now, but I think I'll be very close to making it.

I'm pretty sure I can make some of the dates work - kinda depends on work....I'll know more the closer we get.

Looks like the OK TX route is still up in the air.   I kinda like the idea of the Houston guys meeting up with everyone in Austin.   The interstate ride
down 45 through Dallas to Houston is a beatdown.   Solid 5 hour drive with not much of a let-up in traffic.  

At the very least, I'm in Denton and can offer my place to wrench on bikes if anything was needed.  

Even if I don't get the bike roadworthy in time, if my work schedule allows, I could do a chase vehicle.   I'll start checking in more to see what develops.


Coming out of Oklahoma, you guys could hit 82 west through Muenster (which has some great German food restaurants and meat markets etc) then hit 59 south
at St. Jo  through Bowie to Jackboro, where you'd pick up 281 south to 183 to Georgetown/Lake Travis.   It's a very peaceful low-traffic ride as compared with 75 into Dallas and
then over.  Just a thought.

A big thank-you to guys planning this.   What a great idea.  
« Last Edit: March 24, 2011, 12:04:33 PM by greenjeans »
Yep, I'm the kid that figured out how to put things back together...eventually.

Offline the architect

  • Hot Shot
  • ***
  • Posts: 424
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #286 on: March 24, 2011, 08:36:50 AM »
How long is currently slated for Texas, alone?  I'm just thinking out loud, but coming out of OK through Dallas and down to Houston would be a full day.  Houston to Austin and then a portion of the Hill Country ride would be day two.  The remainder of the Hill Country ride and up to West Texas would be a third day.  If Houston is out of the picture, as it may be necessary to do, the Texas portion may be only two days, possibly stretched to three.  Is this consistent with the overall schedule?
Rider no. 83 on the 2013 SOHC/4 Honda World Tour
Rider no. 228 on the 2012 SOHC/4 Honda World Tour
Rider no. 70 on the 2011 SOHC/4 Honda World Tour

my '75 CB750 cafe build photo documentary:  looking for the Lone Stars is like playing Where's Waldo -- enjoy.
http://www.flickr.com/photos/34828040@N05/sets/72157615892537535/

CB350 twin, rigid meat grinder:
http://www.flickr.com/photos/34828040@N05/sets/72157627005176764/

Blip Workshop
http://www.blipworkshop.com
http://www.facebook.com/blipworkshop

Offline Coyote13

  • Hot Shot
  • ***
  • Posts: 534
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #287 on: March 24, 2011, 09:09:41 AM »
I was thinking the schedule (if we include Houston) would be more like, OK to Dallas day 1.  Dallas to Houston takes up day 2.  On day 3 we ride Houston to Austin/Hillcountry Bonanza.  Day 4 will get us about halfway to Lubbock unless we push it, and then the NM handoff would be towards the end of day 5.


You have to remember Arch, we're riding some pretty old metal here, you have to allot time for breakdowns, cooldowns, rest stops (a plethora I'm sure), and slow pokes.  There are likely gonna be some....shall we say "old-timers"? riding as well  :D.  I think your two day ride theory is a *little* bit of a stretch.  Just my opinion though
'78 CB750K.  Throttle ripper.
'71 CB100.  Grocery getter.
'01 XL883.  Panty dropper. Gone but not forgotten.

Offline the architect

  • Hot Shot
  • ***
  • Posts: 424
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #288 on: March 24, 2011, 09:20:19 AM »
I agree about the older machines and bike travel in general being more tiring - I'm looking forward to many stops along the way to stretch the old back  ;D  That was one reason I thought we'd want to avoid the major highways in favor of slower-paced roads.  The OK border to Dallas is only 90 miles - that's why I figured on pushing farther into Texas on the first day.  Dallas to Houston is about 4 hours by car, so I thought it would be do-able to get from OK to Houston in one day.  I haven't done a long ride like this, so I have to rely on others to help judge the time.

If we dodge Houston altogether, what route will the Dallas peeps likely take to Austin?
Rider no. 83 on the 2013 SOHC/4 Honda World Tour
Rider no. 228 on the 2012 SOHC/4 Honda World Tour
Rider no. 70 on the 2011 SOHC/4 Honda World Tour

my '75 CB750 cafe build photo documentary:  looking for the Lone Stars is like playing Where's Waldo -- enjoy.
http://www.flickr.com/photos/34828040@N05/sets/72157615892537535/

CB350 twin, rigid meat grinder:
http://www.flickr.com/photos/34828040@N05/sets/72157627005176764/

Blip Workshop
http://www.blipworkshop.com
http://www.facebook.com/blipworkshop

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,274
  • Humboldt, AZ
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #289 on: March 24, 2011, 11:10:16 AM »
Here is a link to the original preliminary map:

http://maps.google.com/maps/ms?hl=en&ie=UTF8&msa=0&msid=200743221569585602370.0004988c233ca0790ae60&ll=33.174342,-101.953125&spn=7.353632,9.876709&t=h&z=7&iwloc=suck

The schedule is to bring Godzilla from somewhere in OK to DFW on 4-19, from DFW to Austin on 4-20, to Lubbock( or Big Spring) on 4-22, and then ending up at Duncan, AZ around noon on 4-24.
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #290 on: March 24, 2011, 12:49:36 PM »
Hey Scottly,

You might consider taking Hwy82 (just past the TX - OK border) west to St. Jo.  In St. Jo, you can pick up hwy 59 south all the way to Jacksboro.
In Jacksboro, You can hit 281, like you have planned, all the way to Burnet.

I-35 through Denton to Ft.Worth can get congested and a bit crazy depending on the time of day.  In fact, I try to avoid the interstate as much as I possibly can.
I'll admit I am far more conservative than I was in my youth.    Just don't care for the cagers much anymore.

Might just be me, but I definitely prefer quieter / less traveled roads.    It would probably add an hour to the riding time, but it would offer easier places
to pull off and rest etc.    More peaceful and less stressful as well.    Been a long time since I took a ride down to Austin, but that was the route we always took.


Another bonus:   In St. Jo and some of the smaller Texas towns, you can actually buy gas without ethanol.

Again - this is just my 2 cents.   You guys are doing a great thing here.
« Last Edit: March 24, 2011, 12:51:42 PM by greenjeans »
Yep, I'm the kid that figured out how to put things back together...eventually.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,309
  • Central Texas
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #291 on: March 24, 2011, 05:13:28 PM »
Hey guys,

I pm'd Jerry 2 days ago about adding a day to TX, have not heard back yet.

It's a shame the biggest state only gets two days.
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,274
  • Humboldt, AZ
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #292 on: March 24, 2011, 06:12:23 PM »
1) It is too late to add time to TX: people have already arranged time off from work,etc. We have to do the best we can to follow the current schedule.

2) TX gets 4 full days as it is: 1/2 day from the OK border to DFW, 1 full day to get to Austin, 2 full days to get to Lubbock/Big Spring, and 1/2 day to get into NM.
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline Coyote13

  • Hot Shot
  • ***
  • Posts: 534
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #293 on: March 25, 2011, 07:50:44 AM »
Stev-o where'd you get the idea we only have 2 days?
'78 CB750K.  Throttle ripper.
'71 CB100.  Grocery getter.
'01 XL883.  Panty dropper. Gone but not forgotten.

Offline the architect

  • Hot Shot
  • ***
  • Posts: 424
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #294 on: March 25, 2011, 07:56:34 AM »
1) It is too late to add time to TX: people have already arranged time off from work,etc. We have to do the best we can to follow the current schedule.

2) TX gets 4 full days as it is: 1/2 day from the OK border to DFW, 1 full day to get to Austin, 2 full days to get to Lubbock/Big Spring, and 1/2 day to get into NM.


Just an observation.  Allowing 1/2 day to go 90 miles might be a bit generous (OK border to DFW), as does burning another 1/2 day to go approximately 100 miles (Big Spring/Lubbock to NM border).  If both of those got pushed into adjacent days, Texas would gain another full day.

Here's a map that I *think* captures the route currently in discussion:

http://maps.google.com/maps/ms?hl=en&ie=UTF8&msa=0&msid=211361146505888212306.00049f1225b93e033be83&ll=32.583849,-99.645996&spn=6.2834,11.315918&z=7

Rider no. 83 on the 2013 SOHC/4 Honda World Tour
Rider no. 228 on the 2012 SOHC/4 Honda World Tour
Rider no. 70 on the 2011 SOHC/4 Honda World Tour

my '75 CB750 cafe build photo documentary:  looking for the Lone Stars is like playing Where's Waldo -- enjoy.
http://www.flickr.com/photos/34828040@N05/sets/72157615892537535/

CB350 twin, rigid meat grinder:
http://www.flickr.com/photos/34828040@N05/sets/72157627005176764/

Blip Workshop
http://www.blipworkshop.com
http://www.facebook.com/blipworkshop

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,274
  • Humboldt, AZ
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #295 on: March 25, 2011, 09:13:49 AM »


Just an observation.  Allowing 1/2 day to go 90 miles might be a bit generous (OK border to DFW), as does burning another 1/2 day to go approximately 100 miles (Big Spring/Lubbock to NM border).  If both of those got pushed into adjacent days, Texas would gain another full day.



The first half of the day to get to DFW is allotted to get from OKC to the border, also the riders from DFW to the border for the hand-off will have a 180 mile round trip.

The second half of the day from Big Spring/Lubbock to the NM border is allotted to get to Las Cruces, NM.
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline CBGhia

  • Expert
  • ****
  • Posts: 1,347
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #296 on: March 25, 2011, 05:36:32 PM »
Hey Scottly,

You might consider taking Hwy82 (just past the TX - OK border) west to St. Jo.  In St. Jo, you can pick up hwy 59 south all the way to Jacksboro.
In Jacksboro, You can hit 281, like you have planned, all the way to Burnet.

I-35 through Denton to Ft.Worth can get congested and a bit crazy depending on the time of day.  In fact, I try to avoid the interstate as much as I possibly can.
I'll admit I am far more conservative than I was in my youth.    Just don't care for the cagers much anymore.

Might just be me, but I definitely prefer quieter / less traveled roads.    It would probably add an hour to the riding time, but it would offer easier places
to pull off and rest etc.    More peaceful and less stressful as well.    Been a long time since I took a ride down to Austin, but that was the route we always took.


Another bonus:   In St. Jo and some of the smaller Texas towns, you can actually buy gas without ethanol.

Again - this is just my 2 cents.   You guys are doing a great thing here.

John,

The only problem with heading west of DFW is trying to meet up with the Dallas folks.  They would have to ride all the way out to Weatherford or someplace. 

What about meeting in Denton?  We take "It" there on the 19th and then meet up in Denton on the morning of 4/20 and head to Austin.  We can be there by nightfall, with a lunch stop in Dublin (maybe). 
I updated the "prelim" map to show this.  Just a thought.  The route is completely open to debate.  The meeting points and time frame are important. I also added the meeting spot in Austin that was suggested.  620 and 2222. 

http://maps.google.com/maps/ms?hl=en&ie=UTF8&msa=0&msid=200743221569585602370.0004988c233ca0790ae60&ll=33.174342,-101.953125&spn=7.353632,9.876709&t=h&z=7&iwloc=suck
CB550 Cafe, GL1000, Buell Ulysses
if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.
"The cleaner the dipstick, the closer to God." -Rev. Horton Heat
“Faster, Faster, until the thrill of speed overcomes the fear of death.”  - Hunter S. Thompson

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,274
  • Humboldt, AZ
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #297 on: March 25, 2011, 06:22:31 PM »
CBGhia, good to hear from you! Can you plot a route from Big Spring to Las Cruces,NM on the map? It would be very helpful to have an educated guess about miles/time from Austin to Big Spring, to Las Cruces.
Thanks!
Scott
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline CBGhia

  • Expert
  • ****
  • Posts: 1,347
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #298 on: March 26, 2011, 08:36:19 AM »
I added 2 routes.  one looks like it might be fun.
CB550 Cafe, GL1000, Buell Ulysses
if you dont trial spin the camshaft in the head and cover you are a novice,with no natural mechanical appitude,destined for destruction.
"The cleaner the dipstick, the closer to God." -Rev. Horton Heat
“Faster, Faster, until the thrill of speed overcomes the fear of death.”  - Hunter S. Thompson

Offline greenjeans

  • Industrial strengthed dreamer.
  • Old Timer
  • ******
  • Posts: 2,962
  • 1972 CB750K2
Re: Team Southwest Region - OK, TX, NM - Riders check in here
« Reply #299 on: March 26, 2011, 09:06:08 AM »
Guess I missed the guys coming in from Dallas.  Was really only thinking of the 82 west into St. Jo for the ride through Muenster - just a very unique old German town in the middle of nowhere w/ good food and ethaol free gas.  Those new routes route look good.   380 from Denton into Decatur usually isn't that bad - depending on the time of day. (You'd only really want to avoid it around sundown - the glare on that road is pretty bad sometimes - lots of crazy driving truckers as well.  But - it's only about 30 minutes from Denton to Decatur.    You guys can definitely stop at my house for rest or any wrenching that would need to happen.  I'm a few exits down from 380 and very close to the highway.  My house is small, but my shop is pretty well stocked.    There are a few good spots in Denton to park cycles if we need a few beers or some food.    I'll check back in later.

Another couple options:

The Dallas guys could also meet up in Denton and we could ride up to Gainesville to catch 82 and the guys coming out of OK -
Or... The Dallas guys could head up 75 to 82 and over (pretty peacefull after you get through McKinney).  We could catch them at the juction of 35 and 82.   Might save them a bit of the headache that is:   I-35 into Denton from Dallas.

Starting to ramble now....   On another note, I just ordered some new tires, chain & sprockets.  My only real concern now is the wiring harness.  Everything seems to run pretty strong.  Haven't got to air it out yet.  Need the tires & chain.
Yep, I'm the kid that figured out how to put things back together...eventually.