« previous next »
Pages: [1]   Go Down

Author Topic: Front/rear disc removal question  (Read 1532 times)

0 Members and 1 Guest are viewing this topic.

Offline DYSKORD

  • Enthusiast
  • **
  • Posts: 220
Front/rear disc removal question
« on: January 11, 2011, 01:18:18 PM »
Wanted to repaint the centers of my brake discs. Does the rotor come off after loosening the six nuts or does the center "assembly" need to be removed? Is this the smae for the rear? 76 cb750f.
Logged

Offline steam-powered man

  • Not the eggman, Not the walrus, I am the
  • Hot Shot
  • ***
  • Posts: 591
  • Where are you going? I was going to make Espresso
Re: Front/rear disc removal question
« Reply #1 on: January 11, 2011, 02:16:02 PM »
removing only the bolts will allow you to take off the rotor.  i first snug up, then torque the nuts in a cross-pattern (i also use loctite) on reassembly.  for a clearer picture before you disass, try bikebandit.com.  has exploded views of your bike wheels. ;)
Logged
searching for a dr350se
Pages: [1]   Go Up
« previous next »