« previous next »
Pages: [1]   Go Down

Author Topic: cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!  (Read 3041 times)

0 Members and 1 Guest are viewing this topic.

Offline wick

  • Full Member
  • *
  • Posts: 39
  • cb750k2 836
cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!
« on: January 07, 2011, 06:30:33 PM »
just chopped- and gutted a Yoshimura RS-3 Race Slip-On Exhaust-- runs and starts  better- was just running- open headers... ::)  oh and kick- only with rearsets.......
 


[youtube=425,350]http://www.youtube.com/watch?v=FY23wMKKkgA[/youtube]
« Last Edit: January 07, 2011, 06:34:52 PM by wick »
Logged

Offline ksmith0034

  • When I grow up I want to be a
  • Hot Shot
  • ***
  • Posts: 616
    • Please subscribe to my motovlog
Re: cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!
« Reply #1 on: January 08, 2011, 07:28:05 AM »
It sounds nice, but I personally don't care for the looks of the slender pipe with a big wart muffler (although it looks like you did a good job on the chop).
How is your epoxy floor holding up?  Mine started flaking in places after only one year!  :'(
Logged
It took 10 years but she's finally done!
             ↓   ↓   ↓   ↓   ↓
Stocker 2 Rocker CAFE conversion

My YouTube channel HERE:
https://www.youtube.com/MotoCafeRacer

Offline fastbroshi

  • Puppet
  • Old Timer
  • ******
  • Posts: 2,645
Re: cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!
« Reply #2 on: January 08, 2011, 08:05:48 AM »
How much clearance do you have between your kicker and the toe peg of the brake pedal?
Logged
Just call me Timmaaaaay!!!

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,307
  • Central Texas
Re: cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!
« Reply #3 on: January 08, 2011, 08:09:22 AM »
Bike looks beautiful. Will be watching, what's next?
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........

Offline luhojs

  • Project hoarder
  • Full Member
  • *
  • Posts: 36
Re: cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!
« Reply #4 on: January 09, 2011, 03:16:49 AM »
Dig the sound !
I see you have a set of Ohlins shocks at the rear with "lowers"  or "lowering blocks"
How is that working out? Notice anything from the different load angle?
Logged
cb750 chopper
cb750 dragbike

Offline wick

  • Full Member
  • *
  • Posts: 39
  • cb750k2 836
Re: cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!
« Reply #5 on: January 09, 2011, 08:24:25 AM »
hey``  thanx- all-

well- the- garage- floor- is flakin` every where- and- i guess- due- to - the burn outs-..

kicker- and brake- pedd- touch.. if you kick all the way down... but  the starts without.. hittn ......

` took 3" out of the front. and- at least 2" from- rear- bike- much more- stable @ 100mph. likes a lower rear........ ;)
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,279
  • ROCK & ROLL
Re: cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!
« Reply #6 on: January 09, 2011, 04:05:05 PM »
Quote from: ksmith0034 on January 08, 2011, 07:28:05 AM
It sounds nice, but I personally don't care for the looks of the slender pipe with a big wart muffler (although it looks like you did a good job on the chop).
How is your epoxy floor holding up?  Mine started flaking in places after only one year!  :'(

Do you have PPG products in the States..? If you want an epoxy floor that will last for 10 years or more, try cleaning the bare concrete with a hydrochloric acid and water mix, this will etch the concrete and clean off all the contaminants. If you have PPG try and get an epoxy product they have called "Amerlock", this is the best industrial epoxy for floors you can buy,i have done thousands and thousands of square metres of flooring with this product. Most of the floors we do are high traffic floors and have semi trailers and forklifts {bloody big ones} driving on it all day and it holds up to that extremely well. In a home shop set up it will be extremely resilient and last for years.
Always wear protective gear and mask {2 pac mask} when using these products.....

Mick
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Stev-o

  • Ain't no
  • Really Old Timer ...
  • *******
  • Posts: 34,307
  • Central Texas
Re: cb750 k2 , carbon Yoshimura RS-3 Race Slip-On Exhaust chopped!!
« Reply #7 on: January 09, 2011, 06:27:35 PM »
Quote from: Retro Rocket on January 09, 2011, 04:05:05 PM
Quote from: ksmith0034 on January 08, 2011, 07:28:05 AM
It sounds nice, but I personally don't care for the looks of the slender pipe with a big wart muffler (although it looks like you did a good job on the chop).
How is your epoxy floor holding up?  Mine started flaking in places after only one year!  :'(

Do you have PPG products in the States..?


Yes. Pittsburgh Plate Glass Company (PPG) was started in PA over 125 years ago.
Logged
'74 "Big Bang" Honda 750K [836].....'76 Honda 550F.....K3 Park Racer!......and a Bomber!............plus plus plus.........
Pages: [1]   Go Up
« previous next »