Getting close to being finished with wiring this thing. Still need to run two more wires up front for the turn signals, terminate the 8 mUnit IN/OUT wires into their connector and create a couple more plugs for the front turn signals / accent halo LED strips (which have yet to make an appearance in any photos . . . more to come there).
Here's a photo showing how I'm using that weird looking 3D printed wire guide. I ran out of super tiny zip ties so as soon as more arrive I'll tidy up the straight wires by tying them to their respective "arm". In this photo, up is towards the back of the bike.
One very satisfying activity I accomplished this weekend was drilling holes in the handlebars to accommodate the stock Honda controls I'm using. The turn signal / hi beam / horn combo unit, as well as the starter/kill switch and throttle assembly all have posts that locate themselves in the handlebars to prevent rotation. I was able to lock them in their finals spots and tidy up the wires. Very nice seeing the controls in their final form.