« previous next »
Pages: [1]   Go Down

Author Topic: ??easy muffler fix??  (Read 3595 times)

0 Members and 3 Guests are viewing this topic.

Offline cafenut

  • it dont hurt till the bone shows
  • Full Member
  • *
  • Posts: 92
??easy muffler fix??
« on: January 14, 2011, 01:27:07 AM »
does anyone have a good solution to a couple pinky sized holes or smaller in the bottom of muffler? thought maybe some type of putty or something? 78 k
Logged
88 1100 katana
84 500 ascott
78 750 f cafe
78 750 f original
78 750 k stock
76 750 k custom
76 750 k chop project

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: ??easy muffler fix??
« Reply #1 on: January 14, 2011, 07:39:49 AM »
Get a tube of Muffler Mender at the parts store.  It's a thick paste that cures when it gets heated up by the exhaust.  It's been plugging a hole in one of my stock 550 pipes for a few years.  Obviously any patch job like this is only temporary, though, because the rust is happening from the inside out, and the total damage is much larger than the size of the hole. 
Logged

Bud Man

  • Guest
Re: ??easy muffler fix??
« Reply #2 on: January 14, 2011, 07:43:43 AM »
Good ol' JB Weld has worked well for years for me.  But as mentioned earlier, its only a temporary fix.....   >:(

Bud
Logged

Offline florence

  • Enthusiast
  • **
  • Posts: 154
Re: ??easy muffler fix??
« Reply #3 on: January 14, 2011, 07:45:43 AM »
If you leave the hole it lets the moisture out!
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: ??easy muffler fix??
« Reply #4 on: January 14, 2011, 07:59:14 AM »
Quote from: florence on January 14, 2011, 07:45:43 AM
If you leave the hole it lets the moisture out!

Even better, if you take all the mufflers off then there's nowhere for moisture to get trapped at all!  Problem solved! ;D
Logged

Offline bikerbart

  • Master
  • *****
  • Posts: 1,579
Re: ??easy muffler fix??
« Reply #5 on: January 14, 2011, 09:13:37 AM »
the muffler mend tape,cut a 1/2 square or circle,stick on.It doesnt look as crappy as a wad of putty,and its metal tape,temp fix but quick and easy.Seems to last a couple of years so far.
Logged
its better to regret something you have done,than something you havent.Except playing with explosives.

Offline gnarlycharlie4u

  • Far from being an
  • Expert
  • ****
  • Posts: 840
  • two steps forward, two steps back :-/
Re: ??easy muffler fix??
« Reply #6 on: January 14, 2011, 11:55:00 AM »
Logged

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: ??easy muffler fix??
« Reply #7 on: January 14, 2011, 12:14:38 PM »
Quote from: bikerbart on January 14, 2011, 09:13:37 AM
the muffler mend tape,cut a 1/2 square or circle,stick on.It doesnt look as crappy as a wad of putty,and its metal tape,temp fix but quick and easy.Seems to last a couple of years so far.

The mending paste is pushed into the hole and smoothed out to match the contour of the muffler.  You don't just ball it up and stick it on the outside of the hole. ::) ;D
Logged

Offline bikerbart

  • Master
  • *****
  • Posts: 1,579
Re: ??easy muffler fix??
« Reply #8 on: January 14, 2011, 12:52:49 PM »
you dont?it ends up looking like someone stuck a wad of chewing gum on it,(if I do it)I was only adding another suggestion,sheesh. ::) :-*
Logged
its better to regret something you have done,than something you havent.Except playing with explosives.

Offline tango911

  • Expert
  • ****
  • Posts: 1,012
Re: ??easy muffler fix??
« Reply #9 on: January 14, 2011, 01:17:02 PM »
easy muffler fix.   cut them off :P

nice and loud
Logged
CURRENT STABLE:
1969 Honda Dream 305 (black)
1974 Mach III kawi 500 smoker
K2 (project)
K2 Original fixer up
K0 original fixer up
2006 CRF250R

Offline Tugboat

  • Puppet
  • Master
  • *****
  • Posts: 1,778
  • '75 CB750K + '67 CL90 + '71 CT90
    • PseudoMoto
Re: ??easy muffler fix??
« Reply #10 on: January 14, 2011, 01:24:43 PM »
Quote from: Gordon on January 14, 2011, 12:14:38 PM
Quote from: bikerbart on January 14, 2011, 09:13:37 AM
the muffler mend tape,cut a 1/2 square or circle,stick on.It doesnt look as crappy as a wad of putty,and its metal tape,temp fix but quick and easy.Seems to last a couple of years so far.

The mending paste is pushed into the hole and smoothed out to match the contour of the muffler.  You don't just ball it up and stick it on the outside of the hole. ::) ;D

That's what she said.  :o
Logged
If it's worth doing, it's worth doing twice.

Offline Gordon

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 12,114
  • 750K1, 550K2
Re: ??easy muffler fix??
« Reply #11 on: January 14, 2011, 01:44:50 PM »
Quote from: bikerbart on January 14, 2011, 12:52:49 PM
you dont?it ends up looking like someone stuck a wad of chewing gum on it,(if I do it)I was only adding another suggestion,sheesh. ::) :-*

I know, but if my suggestion gets trashed in the process I've gotta stand up for it! ;D ;)
Logged

Offline bikerbart

  • Master
  • *****
  • Posts: 1,579
Re: ??easy muffler fix??
« Reply #12 on: January 14, 2011, 04:57:54 PM »
get up stand up,stand up for your fix
Logged
its better to regret something you have done,than something you havent.Except playing with explosives.

Offline BeSeeingYou

  • Old Timer
  • ******
  • Posts: 3,913
Re: ??easy muffler fix??
« Reply #13 on: January 14, 2011, 05:26:09 PM »
Quote from: bikerbart on January 14, 2011, 04:57:54 PM
get up stand up,stand up for your fix

Jah mon. :D
Logged

Offline cafenut

  • it dont hurt till the bone shows
  • Full Member
  • *
  • Posts: 92
Re: ??easy muffler fix??
« Reply #14 on: January 15, 2011, 04:18:09 AM »
 :D lol. thanks guys. pretty much the suggestions i thought id get. just wasn't sure if some miracle cure came along in the last 4 years since I've had to fix a muffler.
Logged
88 1100 katana
84 500 ascott
78 750 f cafe
78 750 f original
78 750 k stock
76 750 k custom
76 750 k chop project
Pages: [1]   Go Up
« previous next »