Author Topic: Cafe 550 done now a Harris MAgnum  (Read 4543 times)

0 Members and 1 Guest are viewing this topic.

Offline MAX MPH

  • Full Member
  • *
  • Posts: 79
    • MAX MPH ULTIMATE BIKER CLOTHING
Cafe 550 done now a Harris MAgnum
« on: March 13, 2011, 04:13:16 AM »
Just finished a Cafe Racer see below so now onward with the Harris


heres the Harris on day one a none runner with a VFR single sided swingarm.


I didnt like the back end, so decided to get shut & fit a Harris Back end with 1200 Bandit wheel etc

the fabrication looked very agricultural such a shame on a chassis of such pedigree

Thanks to rusty nuts i got a Bandit wheel disc caliper etc

here it is with a trial fit to swing arm


and on with the right swingarm





next job round to my mates eddies to make up all the spacers required, then scallopp out the tank sides & maybe a GSXR front end

this is what im aiming it to look like when done but no fairing


Keep you posted Cheers Andy
ps- is the motor a Katana ? its 1000cc 1980
« Last Edit: March 13, 2011, 04:15:55 AM by MAX MPH »