Author Topic: Race and Performance parts for sale and wanted. (Read 347928 times)

Red Good · « **Reply #150 on:** September 23, 2012, 10:40:13 PM »

Jerry , I will take those ring numbers if you would .
Thanks . Red

Can someone explain why I cannot put my email addy in a post ? Red

NickO · « **Reply #151 on:** September 24, 2012, 07:46:49 AM »

Quote from: Red Good on September 23, 2012, 10:40:13 PM

................................

Can someone explain why I cannot put my email addy in a post ? Red

You need to use the "inset email" tool (the icon is an envelope with two swirly blue arrows around it)

Red Good · « **Reply #152 on:** September 24, 2012, 08:25:44 AM »

Ok will try that

Sorry , you are not allowed to post external links ?

Is it because my email ends .com ?

Jerry Rxman Griffin aka MuthaF'er · « **Reply #153 on:** September 24, 2012, 09:01:19 AM »

Quote from: Red Good on September 23, 2012, 10:40:13 PM

Jerry , I will take those ring numbers if you would .
Thanks . Red

Can someone explain why I cannot put my email addy in a post ? Red

Red,

Perhaps you haven't posted enough yet? Let me try mine - GeraldJGriffin@gmail.com. The one in your info to the left, the envelope, works.

Here are the part numbers. They fit the pistons like Fang posted. Not sure about the other style??

Top 203778
2nd 201336
Oil 001549

May not be 'in stock' and take a little bit to make for you. I sent a piston to them for fitment. The kit is installed so I can't do any measurements. I used the HA rings in top and 2nd and Total Seal's oil rings. Perhaps Fang can measure the land thickness and compare to your's? I could find the HA oil rings and measure the thickness if you need.

Bill/BentON Racing · « **Reply #154 on:** September 24, 2012, 05:43:36 PM »

Quote from: kmb69 on September 22, 2012, 02:36:03 PM

I want to buy that head. Sending PM.

Quote from: kmb69 on September 22, 2012, 02:36:03 PM

I want to buy that head. Sending PM.

Ships tomorrow! Thanks,Bill

Red Good · « **Reply #155 on:** September 24, 2012, 09:42:19 PM »

Music City if you find a set I will take your three ? if you want to . Red

Thanks for the numbers Jerry , any ideas where to get 71 mm rings ? Rooting thru my stash and found a cylinder with pistons and rods all new with a spare set of sleeves . Might as well start looking for these too . Not like I won't build something out of it ! Thanks guys . Red

Jerry Rxman Griffin aka MuthaF'er · « **Reply #156 on:** September 24, 2012, 10:30:41 PM »

Isn't 71mm a 915? And isn't CycleX doing a 915 now? What size is the 450 twin? 350 twin is 64mm = 812. Oversize 450?

Retro Rocket · « **Reply #157 on:** September 25, 2012, 01:25:36 AM »

Quote from: Jerry Rxman Griffin on September 24, 2012, 10:30:41 PM

Isn't 71mm a 915? And isn't CycleX doing a 915 now? What size is the 450 twin? 350 twin is 64mm = 812. Oversize 450?

71mm is 1000cc Jerry.

Big Jay at APE Engineering has the rings.

Bill/BentON Racing · « **Reply #158 on:** September 26, 2012, 06:07:34 PM »

Mo,stuff!

Part of Cafe package! ;)SOLD SOLD SOLD

Accel coils and wire 9mm!$50.00

Andrews coils$40.00

Stock$35.00

Martek ignition$50.00

Used

Baby Face inspecting it! 4 month old Dobe

Dyna III ignition $50.00 SOLD

Used

He says cool!

All plus shipping.Thanks,Bill

Greggo · « **Reply #159 on:** September 27, 2012, 07:58:25 AM »

Bill, I will take that Dyna III

Greggo · « **Reply #160 on:** September 30, 2012, 09:36:42 PM »

Selling three of these. They're real Yoshi patches, and they're real old. If there ever was glue on them, it's gone now. They'll need to be sewn on. They're about 4"x2-3/4". $18 each shipped, or all three for $48 shipped, or PM me an offer

Retro Rocket · « **Reply #161 on:** September 30, 2012, 09:42:44 PM »

Greggo, i would like those please..... Will you ship them to Aus for me..?

Mick

Greggo · « **Reply #162 on:** September 30, 2012, 10:04:46 PM »

Quote from: Retro Rocket on September 30, 2012, 09:42:44 PM

Greggo, i would like those please..... Will you ship them to Aus for me..?

Mick

No problem. Let me figure out the shipping for the envelope.

Retro Rocket · « **Reply #163 on:** September 30, 2012, 10:07:25 PM »

Quote from: Greggo on September 30, 2012, 10:04:46 PM

Quote from: Retro Rocket on September 30, 2012, 09:42:44 PM
Greggo, i would like those please..... Will you ship them to Aus for me..?

Mick

No problem. Let me figure out the shipping for the envelope.

Thank you very much mate, they will go well with my custom Yoshi points cover and Yoshi pipe badges {1970's} that i managed to score quite by accident...

Beware, i posted in all 3 of your threads as i REALLY want these....

Greggo · « **Reply #164 on:** September 30, 2012, 10:10:03 PM »

Quote from: Retro Rocket on September 30, 2012, 10:07:25 PM

Quote from: Greggo on September 30, 2012, 10:04:46 PM
Quote from: Retro Rocket on September 30, 2012, 09:42:44 PM
Greggo, i would like those please..... Will you ship them to Aus for me..?

Mick

No problem. Let me figure out the shipping for the envelope.

Thank you very much mate, they will go well with my custom Yoshi points cover and Yoshi pipe badges {1970's} that i managed to score quite by accident... Beware, i posted in all 3 of your threads as i REALLY want these....

No worries. SOLD

Bill/BentON Racing · « **Reply #165 on:** October 01, 2012, 12:16:57 PM »

I don't even get one!!!!

Bill
Retro check your PM's.
Greggo ,going out today.

Howell · « **Reply #166 on:** October 03, 2012, 03:31:06 AM »

Now for sale our CB500F racer , rebuilded with the stock Honda frame.
Including a spare engine with transport box and a lot of different spare parts.
Both engines are complete overhauled.
Without fairing and windscreen , tank and seat must be sprayed.(sanded and in primer)
All in one purchase

P.O.A. - No bargain.

classic bike tuner · « **Reply #167 on:** October 03, 2012, 01:40:04 PM »

Quote from: Howell on October 03, 2012, 03:31:06 AM

Now for sale our CB500F racer , rebuilded with the stock Honda frame.
Including a spare engine with transport box and a lot of different spare parts.
Both engines are complete overhauled.
Without fairing and windscreen , tank and seat must be sprayed.(sanded and in primer)
All in one purchase

P.O.A. - No bargain.

how much mm is that front brake

turboguzzi · « **Reply #168 on:** October 04, 2012, 02:06:03 AM »

hey Gerrit, check your PMs

TG

portnoy · « **Reply #169 on:** October 04, 2012, 03:35:25 PM »

Looking for the drive post for an ARD mag. Anyone have an extra?

turboguzzi · « **Reply #170 on:** October 05, 2012, 12:26:44 AM »

welcome, an introduction?

you might have more luck in the sohc4 bikes section

jaguar · « **Reply #171 on:** October 05, 2012, 09:03:17 AM »

Guy on the honda chopper board was making them I think

portnoy · « **Reply #172 on:** October 05, 2012, 05:04:18 PM »

Sorry, been a member for about 3 years, just don't post often. Have a 76 CB750 with 12.5:1CR 836 pistons, ported head, yoshi grind cam, about 7lbs taken off the crank, undercut gears. Bunch of other stuff but that covers the better stuff.

Thought about going to honachopper but I figured I would check here first. I know they're hens teeth but I had my fingers crossed and it's all I need to get it on my bike.

Red Good · « **Reply #173 on:** October 06, 2012, 08:21:37 PM »

Copperheadz over at HC.com is the guy your looking for over there .

Retro Rocket · « **Reply #174 on:** October 19, 2012, 02:10:06 PM »

Greggo, got the patches mate....excellent and thank you...

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 347928 times)