Author Topic: Race and Performance parts for sale and wanted.  (Read 139834 times)

0 Members and 1 Guest are viewing this topic.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 9,523
  • Big ideas....
Re: Race and Performance parts for sale and wanted.
« Reply #25 on: July 18, 2011, 10:10:57 am »
2 sets of Mikuni RS34 carbs racked for the CB750 for sale. You will need new, old style insulators to install these. I can supply these as well at a discount price. PM me for details
Owner of the "Million Dollar CB"

Offline kos

  • Hot Shot
  • ***
  • Posts: 718
    • m3racing.com
Re: Race and Performance parts for sale and wanted.
« Reply #26 on: July 18, 2011, 10:21:48 am »
CB500/550 cams is gone. Went to customer overseas but head is still here.

Mk

220...221, whatever it takes.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,326
  • ROCK & ROLL
Re: Race and Performance parts for sale and wanted.
« Reply #27 on: July 20, 2011, 10:12:23 pm »
Mike, check your PM's..... ;)
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 15,590
  • I REALLY? hate black rims.
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,326
  • ROCK & ROLL
Re: Race and Performance parts for sale and wanted.
« Reply #29 on: July 21, 2011, 01:09:31 pm »
????
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 15,590
  • I REALLY? hate black rims.
Re: Race and Performance parts for sale and wanted.
« Reply #30 on: July 22, 2011, 07:13:33 am »
 :-[ ???

 ;D
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 15,590
  • I REALLY? hate black rims.
Re: Race and Performance parts for sale and wanted.
« Reply #31 on: July 22, 2011, 07:15:16 am »
????

I moved a thread Mick but it seems to have vanished. :(

Sam. ;)
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,326
  • ROCK & ROLL
Re: Race and Performance parts for sale and wanted.
« Reply #32 on: July 23, 2011, 12:57:39 am »
????

I moved a thread Mick but it seems to have vanished. :(

Sam. ;)

That it does.... :o
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline Flying J

  • Old Timer
  • ******
  • Posts: 3,380
Re: Race and Performance parts for sale and wanted.
« Reply #33 on: July 23, 2011, 11:24:12 am »
Selling a 18" WM3 excel non dimpled drilled for a rear CB550/750. Brand new never laced.
$160
http://www.buchananspokes.net/products/excel_non_dimpled_aluminum_rims.asp

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 15,590
  • I REALLY? hate black rims.
Re: Race and Performance parts for sale and wanted.
« Reply #34 on: July 29, 2011, 09:57:00 am »
[/img]trolling for interested party to purchase 750 drag bike. purchased from gene llewellyn, san antonio texas. This is peggys dad. I worked with him in the 70s at Honda Of San Antonio. I helped build the bike in its original incarnation. Has changed much over the years. is now in laydown frame. Hilborn injection.10 inch rear slick. Nitro Methane only. Due to health issues I can no longer ride :( if interested i will take some fotos it is in race ready condition. Thanks All.

Wow, real  8) 8) 8) 8) 8)

Pic added as an edit, it's on page 1 guys. ;)
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline kos

  • Hot Shot
  • ***
  • Posts: 718
    • m3racing.com
Re: Race and Performance parts for sale and wanted.
« Reply #35 on: July 29, 2011, 12:10:32 pm »
if anyones interested in a honda CR750 brake plate.. have no idea if its geniue but I thought someone in here might be interested  ;D

http://www.tga.co.uk/catalog/product_info.php?cPath=34&products_id=191

I was hoping to get some response on this item... I quite dont understand how this should be a cr brake plate as its not a 2LS..!?!?!??! Sam feel free to remove these posts if not suited here  :-*   :D :D :D :D


Rear brake plate shown is NOT a CR750 piece.

Mark
220...221, whatever it takes.

Offline MidnightLamp

  • Wrenchy wrenchy wrench!
  • Enthusiast
  • **
  • Posts: 190
Re: Race and Performance parts for sale and wanted.
« Reply #36 on: August 30, 2011, 12:54:05 pm »
Hoping to sell or trade my CB750 KH Super F cam. Would trade + cash for decent carbs or decent cam or any other performance parts really =P

http://www.satanicmechanic.org/kharmoncam.shtml

http://i53.tinypic.com/k9gld3.jpg
http://i51.tinypic.com/300aedt.jpg
http://i54.tinypic.com/2h51edu.jpg
http://i56.tinypic.com/2rpxs34.jpg

For those that wonder, will NOT work on stock+ spring setups. Motor came to me with severe piston-valve kissing, as the previous owner had run this cam on F2 springs and retainers.

Cheers!  ;D
'75 CB750 - Racer
'69 CB350 - Racer
'68 Enfield 350/440(flat top) - Steet
'54 Enfield 350 - Resto
'74 Commando 850 - Restomod
'67 Enfield 750 (TT7) - Resto

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,721
Re: Race and Performance parts for sale and wanted.
« Reply #37 on: September 21, 2011, 08:30:30 pm »
Im looking for a few parts
ARD or RC Mag
Weber carb set up
smoothbore carbs 29mm
Oil cooler
Dresda swing arm

Right now i have a low number sandcast frame and wrinkle tank to trade.  they are both on Ebay so if/when they sell ill have a few bucks to spend if thats easier

Thanks

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 9,523
  • Big ideas....
Re: Race and Performance parts for sale and wanted.
« Reply #38 on: September 28, 2011, 09:19:23 am »
2 sets of Mikuni RS34 carbs racked for the CB750 for sale. You will need new, old style insulators to install these. I can supply these as well at a discount price. PM me for details
Bump
Owner of the "Million Dollar CB"

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 9,523
  • Big ideas....
Re: Race and Performance parts for sale and wanted.
« Reply #39 on: September 28, 2011, 09:22:36 am »
 New Wiseco 915cc pistons/rings/pins, sleeves and MLS head/base gasket for 700.00+ shipping. Base gasket in .010 or .014
« Last Edit: September 28, 2011, 09:53:43 am by MRieck »
Owner of the "Million Dollar CB"

Offline Mercuno

  • Enthusiast
  • **
  • Posts: 230
Re: Race and Performance parts for sale and wanted.
« Reply #40 on: September 28, 2011, 10:29:04 am »
I need a 650 top end to go on my 550. Also some 750 pistons.  Any reliable sources?

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,326
  • ROCK & ROLL
Re: Race and Performance parts for sale and wanted.
« Reply #41 on: September 28, 2011, 08:59:33 pm »
New Wiseco 915cc pistons/rings/pins, sleeves and MLS head/base gasket for 700.00+ shipping. Base gasket in .010 or .014

Hi Mike, can those MLS gaskets be ordered in any size.?

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 9,523
  • Big ideas....
Re: Race and Performance parts for sale and wanted.
« Reply #42 on: September 29, 2011, 09:41:13 am »
Mick
 they are available in 65mm, 67.5mm and 71mm. They cannot be used with O ringed cylinders or heads.
Owner of the "Million Dollar CB"

Offline voxonda

  • Master
  • *****
  • Posts: 2,230
Re: Race and Performance parts for sale and wanted.
« Reply #43 on: September 29, 2011, 01:08:41 pm »
If interested, look at voxonda.com, a very,very nice CR836 on sale.

Cheers, Rob
Better sorry for failing then for the lack of trying.

Offline voxonda

  • Master
  • *****
  • Posts: 2,230
Re: Race and Performance parts for sale and wanted.
« Reply #44 on: September 30, 2011, 03:12:52 pm »
This is the one:


836 Wiseco engine
Carillo's
RSC close ratio gearbox (no NOVA!) Not yet decided if it will be sold with the bike
31 'tickler' Keihin CR's
M3 cam chain guide
HD primary chains (Classic Cycle city)
Flowed head with bigger inlet and outlet valves
Webcam
Dyna 5 Ohm and ignition.
Very neat megga's. Not the crappy once's.

More info on request, open for serious offers. Certainly not cheap.
« Last Edit: October 03, 2011, 02:01:19 pm by voxonda »
Better sorry for failing then for the lack of trying.

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,326
  • ROCK & ROLL
Re: Race and Performance parts for sale and wanted.
« Reply #45 on: September 30, 2011, 03:17:05 pm »
Very nice Rob, what make of pipes are those mate...?

Mick
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline voxonda

  • Master
  • *****
  • Posts: 2,230
Re: Race and Performance parts for sale and wanted.
« Reply #46 on: September 30, 2011, 03:20:52 pm »
Home brew, Mick. Very tight and neatly tucked in.
Comes with remote starter.


rob
« Last Edit: September 30, 2011, 03:23:48 pm by voxonda »
Better sorry for failing then for the lack of trying.

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,721
Re: Race and Performance parts for sale and wanted.
« Reply #47 on: October 02, 2011, 03:09:53 pm »
Im looking for a few parts
ARD or RC Mag
Weber carb set up
smoothbore carbs 29mm
Oil cooler
Dresda swing arm

Right now i have a low number sandcast frame and wrinkle tank to trade.  they are both on Ebay so if/when they sell ill have a few bucks to spend if thats easier

Thanks

Most of the early parts are sold so i have some cash now to make some deals

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,721
Re: Race and Performance parts for sale and wanted.
« Reply #48 on: October 03, 2011, 09:22:36 am »
2 sets of Mikuni RS34 carbs racked for the CB750 for sale. You will need new, old style insulators to install these. I can supply these as well at a discount price. PM me for details
Bump

PMed about this and some other questions

Offline DavePhipps

  • Expert
  • ****
  • Posts: 1,150
  • Reading the entire Hi-Perf forum
    • Hillside Technology
Re: Race and Performance parts for sale and wanted.
« Reply #49 on: October 04, 2011, 08:32:03 pm »
I need a 650 top end to go on my 550. Also some 750 pistons.  Any reliable sources?
Don't know the costs but dynoman sells pistons made for that application
http://www.dynoman.net/engine/pistons/dp-CB550.html
Bikes:
90 FZR600 RA
74 CB550k
78 GL1000
72 CB500K

 

;
Honda