Author Topic: Race and Performance parts for sale and wanted. (Read 287788 times)

MidnightLamp · « **Reply #850 on:** November 25, 2014, 12:44:41 PM »

That would be too nice =P No, just the carb! Have the template for a log intake mani though (and a log exhaust mani).

POPS 911 · « **Reply #851 on:** December 09, 2014, 04:11:00 AM »

PINGEL WHEELIE BARS W/ROLLER BALLS, EXTENDED SWING ARMS = SQUARE MOLY, ROUND WELDED -BRACED = 1/ WITH AIR, MANY CARBS 29,33,34,40 MM, ELECTRIC FOOT SHIFT W/NO KILL ..... FAIR PRICE

MidnightLamp · « **Reply #852 on:** December 10, 2014, 02:42:21 PM »

Got any square non-extended arms?

Bill/BentON Racing · « **Reply #853 on:** December 15, 2014, 10:53:39 AM »

Just listed some RC steel rods in parts for sale section, Bill

Jadahonda · « **Reply #854 on:** December 23, 2014, 05:26:08 PM »

Is there someone who have a magnet ignition who fit the small sidecover for sale here? I see that "Greggo" sold a kit here earlier. I have the cover, but miss the stator and rotor.

Or is there some other rotor and stator who fits to the cover?

I have borrowed the photo from what Greggo sold earlier.

hotdog · « **Reply #855 on:** December 26, 2014, 12:46:42 AM »

RSC RS1000 crank - new in box...not mine

http://www.ebay.com/itm/181623782980

NalleyRacing · « **Reply #856 on:** January 14, 2015, 02:59:59 PM »

reinforced valve covers @ $100 each. High performance cam and primary chains(3 sets), F model forks and calipers for dual disk conversion $150.. Spare heads and spare cranks at a reasonable price. Oil cooler block off plate $50. Engine cases machined to fit sleeves for big bore. Message me for any pictures.

BPellerine · « **Reply #857 on:** January 14, 2015, 04:48:36 PM »

pics and cam types would help trey!just saying

H2Eric · « **Reply #858 on:** January 15, 2015, 01:49:42 PM »

Quote from: Jadahonda on December 23, 2014, 05:26:08 PM

Is there someone who have a magnet ignition who fit the small sidecover for sale here? I see that "Greggo" sold a kit here earlier. I have the cover, but miss the stator and rotor.

Or is there some other rotor and stator who fits to the cover?

I have borrowed the photo from what Greggo sold earlier.

Electrex World do a self generating digital CDI ignition system for the SOHC CB750, Part No. STK-705. The cover you have will fit over it if you hack out the mountings on the inside. Be careful with the clearance for the bolt that holds the stator to the crank. You can if you wish machine the lip off the Electrex World backing plate for a closer fit.

Cheers
Eric

cbr954 · « **Reply #859 on:** January 16, 2015, 03:51:40 PM »

PM sent Trey

napoleonb · « **Reply #860 on:** January 22, 2015, 10:55:29 AM »

Not mine http://www.ebay.nl/itm/NOS-OEM-Honda-CB750-K0-switch-35300-300-971-on-off-sandcast-1969-70-CB-750-rare-/231451257505?pt=Motorcycles_Parts_Accessories&hash=item35e391eaa1

Justind97 · « **Reply #861 on:** February 02, 2015, 08:51:54 AM »

Set of Yoshimura rods for CB550s
They have been used, but not for very long and very little wear.
Pictures available.

$400 shipped to the U.S.

livefast_dieold · « **Reply #862 on:** February 08, 2015, 03:48:51 PM »

Hi all,

I'm looking for some heavy duty primary chains, the ones sold at classiccyclecity. They seems to be out of stock, any other source?

Thanks!

cbr954 · « **Reply #863 on:** February 08, 2015, 03:58:07 PM »

Cycle X has heavy duty primary chains.

legbags · « **Reply #864 on:** February 15, 2015, 05:10:06 PM »

Looking for are magneto full setup or distributor setup for cb750. Thanks.

Medyo Bastos · « **Reply #865 on:** February 15, 2015, 05:22:12 PM »

i have a polished ard, complete and ready to go...

jaguar · « **Reply #866 on:** February 15, 2015, 06:52:36 PM »

Price?
I'm mostly looking for one that isn't in perfect shape.
Have some HiPo stuff to maybe trade with.

Milunchbox12 · « **Reply #867 on:** February 17, 2015, 09:38:28 PM »

Quote from: Medyo Bastos on February 15, 2015, 05:22:12 PM

i have a polished ard, complete and ready to go...

I,hear you have more than one?pictures and prices?

hotdog · « **Reply #868 on:** February 20, 2015, 07:10:11 PM »

Quote from: Medyo Bastos on February 15, 2015, 05:22:12 PM

i have a polished ard, complete and ready to go...

PM me price & pic please

gschuld · « **Reply #869 on:** March 02, 2015, 04:13:30 PM »

NOS RC Engineering 836 piston and ring set. These should be the later Arias manufactured pistons. $300 Not something you come across every day.

George

Coyote13 · « **Reply #870 on:** March 06, 2015, 11:21:32 AM »

WTB oil cooler adapter for CB750, either for use with the stock filter and housing or with spin on automotive style filter. PM if you've got something, thanks!

Medyo Bastos · « **Reply #871 on:** March 06, 2015, 04:22:16 PM »

Quote from: gschuld on March 02, 2015, 04:13:30 PM

NOS RC Engineering 836 piston and ring set. These should be the later Arias manufactured pistons. $300 Not something you come across every day.

George

i have a nos set of rings to fit those if you need an extra set

gschuld · « **Reply #872 on:** March 06, 2015, 04:58:46 PM »

Good to know Medyo. These have the NOS RC supplied rings with them, but you never know...

George

754 · « **Reply #873 on:** March 08, 2015, 01:25:17 AM »

Medyo, are they one piece oil rings? .... Maybe same as 4th over 350. Rings.

Medyo Bastos · « **Reply #874 on:** March 09, 2015, 04:08:12 PM »

Quote from: 754 on March 08, 2015, 01:25:17 AM

Medyo, are they one piece oil rings? .... Maybe same as 4th over 350. Rings.

i do not remember. i will dig them up this evening and report back!

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 287788 times)