Author Topic: Race and Performance parts for sale and wanted. (Read 287474 times)

Bill/BentON Racing · « **Reply #950 on:** July 02, 2015, 04:55:31 PM »

Now you tell me! Lol, Bill

jaguar · « **Reply #951 on:** July 07, 2015, 06:02:32 AM »

-Two RC Engineering Weber manifolds

-One RC Engineering Weber set up.

-Two RC Engineering distributors, fresh rebuild

-RC Engineering extended swing arm.

-MRE Air shifter

-RC Engineering Golden Rods

Don't have many pictures.
Please let me know what you would be interested in.
Those that say "how much for all" might puke at the price....lol

Might be down to trade for Norton parts (interesting stuff), a vintage road race front end or maybe some other stuff...

Bill/BentON Racing · « **Reply #952 on:** July 07, 2015, 06:47:13 AM »

PM'd you on air shifter , Bill

jaguar · « **Reply #953 on:** July 07, 2015, 08:08:13 AM »

Airshifter is all yours.
Will ship tomorrow.

Tintop · « **Reply #954 on:** July 07, 2015, 10:26:48 AM »

PM'd re RC Weber set-up. -Brian

kmb69 · « **Reply #955 on:** July 07, 2015, 12:39:45 PM »

PM'd re RC Distributor. Keith

luhojs · « **Reply #956 on:** July 07, 2015, 12:44:10 PM »

PM regarding the swingarm

754 · « **Reply #957 on:** July 07, 2015, 12:44:31 PM »

PM re swingarm

jaguar · « **Reply #958 on:** July 07, 2015, 01:21:51 PM »

Ah the "got out of work early group"!

All PMs responded to.
Will update as stuff sells.

Thanks

MRieck · « **Reply #959 on:** July 14, 2015, 02:09:03 PM »

Set of new MTC 71mm pistons with rings, pins and buttons. Never installed/ does not include sleeves. These are not NOS....newer parts as offered by APE. 375.00 + shipping.

jaguar · « **Reply #960 on:** July 15, 2015, 07:36:31 AM »

Still have
-Manifolds
-Swingarm
-Head

Everything else is sold.

bathcollector · « **Reply #961 on:** July 16, 2015, 04:07:58 AM »

Manifold. If the other one is nice it will be heading my way

Bellyboy29 · « **Reply #962 on:** July 21, 2015, 01:45:24 PM »

Hey guys!

I'm into a 400/4 race bike build and I'm looking for some FCR or CR carbs.
Does anyone have a set, or should I bite the bulet and buy a new set?

Regards,

classic bike tuner · « **Reply #963 on:** July 21, 2015, 10:18:27 PM »

used set of 26 but these are not for a 400
400 have kabel on outside

http://www.ebay.nl/itm/141717146224?_trksid=p2055119.m1438.l2649&ssPageName=STRK%3AMEBIDX%3AIT

MRieck · « **Reply #964 on:** July 26, 2015, 06:05:54 AM »

Quote from: Bellyboy29 on July 21, 2015, 01:45:24 PM

Hey guys!

I'm into a 400/4 race bike build and I'm looking for some FCR or CR carbs.
Does anyone have a set, or should I bite the bulet and buy a new set?

Regards,

If you are going to bite the bullet I'd go with FCR's any day of the week over CR's

Tintop · « **Reply #965 on:** July 26, 2015, 07:02:14 AM »

I'd check the engine rules for the organizations you want to race with. Many Vintage race clubs do not allow flat slide carbs.

Greg H · « **Reply #966 on:** July 27, 2015, 12:22:25 AM »

Quote from: jaguar on July 15, 2015, 07:36:31 AM

Still have
-Manifolds
-Swingarm
-Head

Everything else is sold
Hello Mate .
Do you still have the head ?
I've just had a quick look for info on the head but no luck .
What is it ? And do you still have it ?
Cheers Greg "H".

jaguar · « **Reply #967 on:** July 27, 2015, 03:37:47 AM »

I still have the head and a weber manifold.
No real details on the head though.

gschuld · « **Reply #968 on:** July 30, 2015, 07:03:09 PM »

Wanted:

Borrani or similar aluminum wm3 shouldered rim drilled for a disc front hub, in 40 spoke. It's for a road racer.

Also looking for a vintage DID aluminum 18 x 2.15 or 18 x 2.5 front rim, drilled for front disc hub at 40 spoke.

Thanks,

George

TurboD · « **Reply #969 on:** August 12, 2015, 06:56:04 PM »

WANTED

Web 41a or CycleX CX-2 cam for a CB750.

triple · « **Reply #970 on:** August 23, 2015, 05:02:50 AM »

WANTED

29mm carbs ....will be going on a 500 / 4.

any cams to suit ?? what have you got ??

thanks

jweeks · « **Reply #971 on:** August 28, 2015, 06:10:10 PM »

Wanted

Spin on oil filter adapter for a CB750 with external oil cooler fittings. Can use one or two.

Retro Rocket · « **Reply #972 on:** August 28, 2015, 07:32:30 PM »

Real CR750 tank...

http://losangeles.craigslist.org/wst/mpo/5179974959.html

hotdog · « **Reply #973 on:** August 28, 2015, 07:52:02 PM »

Quote from: Retro Rocket on August 28, 2015, 07:32:30 PM

Real CR750 tank...

http://losangeles.craigslist.org/wst/mpo/5179974959.html

No price listed is scary..!?

Instagram - Lumpy Cam Motorcycles

FB - Lumpy Cam Motorcycles

Retro Rocket · « **Reply #974 on:** August 29, 2015, 12:14:02 AM »

Quote from: hotdog on August 28, 2015, 07:52:02 PM

Quote from: Retro Rocket on August 28, 2015, 07:32:30 PM
Real CR750 tank...

http://losangeles.craigslist.org/wst/mpo/5179974959.html
No price listed is scary..!?

Instagram - Lumpy Cam Motorcycles

FB - Lumpy Cam Motorcycles

Yes, I imagine its scary alright...

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 287474 times)