Author Topic: Race and Performance parts for sale and wanted. (Read 294200 times)

AdrenalineReaper · « **Reply #600 on:** September 18, 2013, 08:42:21 PM »

I will take $750 plus shipping on the webers, or give me your best offer.

POPS 911 · « **Reply #601 on:** September 23, 2013, 04:06:02 PM »

WANTED: A CB750A motor [top end ] builder in the OHIO or state in the NORTH EAST. Can bring bike to any location on a 8 hour drive from Columbus, OHIO. No hurry as this bike will be raced in 2014........... will pay cash.

POPS BK 911 NHRA ST/ET

Bill/BentON Racing · « **Reply #602 on:** September 23, 2013, 05:18:00 PM »

POPS,you can only go 915 max without doing bottom end.What size you trying to build,need the special sleeves CycleX has to run a 915....and the flashing has to cleaned up....can be done CAREFULLY without splitting cases,Bill

POPS 911 · « **Reply #603 on:** September 28, 2013, 03:56:54 AM »

BILL: Just wanted the top end done to stop the regular oil seeping from head and block. 24,000 miles = 35 years old and the seals leak.

POPS BK911

Bill/BentON Racing · « **Reply #604 on:** September 28, 2013, 06:37:28 AM »

POPS,K,no matter who what cc,you should replace cylinder studs APE!Jay,and use CycleX Kenny,MLS head gasket,surfaces level.....No leaks,Cylinder head torque goes from 16.5 to 22 ft/lbs!! Just my .02. You still got the NS 400/500 83? I sold my 83 NS400 last year to buy the turbo 750!Fun bike .....both of them! Bill

Tews19 · « **Reply #605 on:** September 28, 2013, 07:40:41 AM »

Sukin... pm me please on price..

Sent from my SAMSUNG-SGH-I337 using Tapatalk 2

POPS 911 · « **Reply #606 on:** October 01, 2013, 03:58:07 AM »

BILL: If you had the time I could load up bike and bring to your shop = would better pay a racer to do the work and know that the work was done RIGHT! Got my CB750A [ 1976 ] street bike and my 1982 CB900F SUPER SPORT BOL D'OR in paint work and complete restore at this time. Picked up a 1984 YAMAHA XVZ12DL for $900 with 20,000 miles that needs paint and a few minor repairs. If you want some cash send me a note, I have truck ,trailer will travel SOUTH.

POPS BK911

Jerry Rxman Griffin aka MuthaF'er · « **Reply #607 on:** October 01, 2013, 01:34:37 PM »

Sounds to me like Pops needs to show up in Atlanta the first week of November

with something to race in that trailer.

Retro Rocket · « **Reply #608 on:** October 01, 2013, 01:37:17 PM »

Quote from: Retro Rocket on September 03, 2013, 03:01:34 PM

I have a very tidy set of Yoshimura set up CR31 smoothbores with ticklers for sale, Also have an assortment of jets and needles and manifolds to go with them. They are stamped CR900 and will suit Z900, GS1000 and the 754 with the manifolds supplied They came off a F model CB750 drag bike..$1500

Bump

Bill/BentON Racing · « **Reply #609 on:** October 01, 2013, 07:52:14 PM »

I see ya still ain't cut the grass.

Sam.

Retro Rocket · « **Reply #610 on:** October 01, 2013, 08:46:03 PM »

Quote from: Bill/BentON Racing on October 01, 2013, 07:52:14 PM

I see ya still ain't cut the grass.

Sam.

Moved house Sammy, more concrete....

Bill/BentON Racing · « **Reply #611 on:** October 01, 2013, 08:51:45 PM »

Same here Mick...moved to Atlanta.

Sam.

Retro Rocket · « **Reply #612 on:** October 01, 2013, 09:01:48 PM »

Enjoy your stay in the USA...hmmm that rhymes....

voxonda · « **Reply #613 on:** October 02, 2013, 01:22:05 AM »

Quote from: Bill/BentON Racing on October 01, 2013, 08:51:45 PM

Same here Mick...moved to Atlanta.

Sam.

Really moved, Sammy?

Cheers, boss

Bill/BentON Racing · « **Reply #614 on:** October 02, 2013, 05:15:10 AM »

Quote from: Retro Rocket on October 01, 2013, 09:01:48 PM

Enjoy your stay in the USA...hmmm that rhymes....

Mick, we on your list, will PM you later,Bill

Sam Green Racing · « **Reply #615 on:** October 02, 2013, 06:20:35 AM »

Quote from: voxonda on October 02, 2013, 01:22:05 AM

Quote from: Bill/BentON Racing on October 01, 2013, 08:51:45 PM
Same here Mick...moved to Atlanta.

Sam.

Really moved, Sammy?

Cheers, boss

Will be home in time for Christmas Rob.

Sam.

Retro Rocket · « **Reply #616 on:** October 02, 2013, 01:10:28 PM »

Quote from: Bill/BentON Racing on October 02, 2013, 05:15:10 AM

Quote from: Retro Rocket on October 01, 2013, 09:01:48 PM
Enjoy your stay in the USA...hmmm that rhymes....
Mick, we on your list, will PM you later,Bill

Thanks Bill...

Sam Green Racing · « **Reply #617 on:** October 02, 2013, 04:04:05 PM »

That's thanks SAM. hahahahaha

AdrenalineReaper · « **Reply #618 on:** October 02, 2013, 07:08:22 PM »

Last shot on the webers, set up for 836cc and includes an RC adapter plate 600$ free shipping inside the U.S. if you have an offer try me. They need to go!!!!

Medyo Bastos · « **Reply #619 on:** October 02, 2013, 07:23:18 PM »

stock boots fit? are those stacks chrome?

scottly · « **Reply #620 on:** October 02, 2013, 07:50:36 PM »

Quote from: AdrenalineReaper on October 02, 2013, 07:08:22 PM

Last shot on the webers, set up for 836cc and includes an RC adapter plate 600$ free shipping inside the U.S. if you have an offer try me. They need to go!!!!

That's a very good deal, IMO.

AdrenalineReaper · « **Reply #621 on:** October 02, 2013, 10:30:49 PM »

Quote from: Medyo Bastos on October 02, 2013, 07:23:18 PM

stock boots fit? are those stacks chrome?

stacks are chrome and you can use the stock boots with slight modification, the webers are slightly larger than the original carbs. Meaning the outer barrels are a pinch wider and the inners are a pinch narrower.

Medyo Bastos · « **Reply #622 on:** October 05, 2013, 12:15:44 PM »

anyone got a 2.5" boost gauge?

BLUE71TURBO · « **Reply #623 on:** October 05, 2013, 05:31:09 PM »

Quote from: Medyo Bastos on October 05, 2013, 12:15:44 PM

anyone got a 2.5" boost gauge?

Get them off of EBAY. Autometer has some nice ones. That is what i'm running.

2 5/8" size.......

http://www.ebay.com/itm/Auto-Meter-Pro-Comp-Ultra-Lite-Boost-Gauge-2-5-8-FREE-POD-/171142873666?pt=Motors_Car_Truck_Parts_Accessories&hash=item27d8e90242&vxp=mtr

Bill/BentON Racing · « **Reply #624 on:** October 05, 2013, 07:09:07 PM »

Got one like in pic,used on Samauto for kicks! $22.00 shipped US,Bill

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 294200 times)