Author Topic: Race and Performance parts for sale and wanted. (Read 287468 times)

gschuld · « **Reply #975 on:** August 31, 2015, 02:38:37 PM »

Wanted:

Vintage Dunstall cb750 tank. Like the style below. Needing repairs OK, minor fiberglass softening possibly OK. I have a nice vintage Dunstall tank now and am looking for a spare for a road racer. I like to have spares when going to the track...

FWIW, it would be used with non ethanol race fuel only, and would be fully sealed before use.

Let me know if you have something hanging around.

George

jaguar · « **Reply #976 on:** September 06, 2015, 06:58:51 AM »

I have two aftermarket cams.
One came out of a huge RC motor, the other from a smaller drag bike.
Dont have exact specs.
Asking $150 each shipped in the USA

Very clean set of shocks.
These are the adjustable version of the alloy bodied Koni shocks.
Very nice upgrade over stock.
Asking $250 shipped in the USA

As always open to offers.

hotdog · « **Reply #977 on:** September 06, 2015, 01:51:40 PM »

$200 USD for the konis, and I pay Intl shipping to Australia..?

Instagram - Lumpy Cam Motorcycles

FB - Lumpy Cam Motorcycles

754 · « **Reply #978 on:** September 06, 2015, 04:42:44 PM »

Posted in for sale..re cams

jaguar · « **Reply #979 on:** September 06, 2015, 05:10:31 PM »

Shocks sold.

Glenn Stauffer · « **Reply #980 on:** September 07, 2015, 03:32:19 AM »

This came in through the website contact form:

"I have a new un used cb 750 redline roadracing frame open to offers"

I don't want to post the person's email address here, so if you are interested, send me a PM and I'll give you the contact information.

gschuld · « **Reply #981 on:** September 07, 2015, 05:04:50 AM »

PM sent.

I was unaware that Redline made any road racing frames for the short time they made motorcycle frames. My understanding is that Redline was started by two former Trackmaster employees and made flat track and motocross frames until they shifted into BMX bicycles. I wonder if the frame is actually a flat track frame instead. That would make sense. It's certainly possible that they made some road race frames, who knows.

There was a cb750 based flat track frame included in a vintage flat tracker being sold in PA a year or so back, with a "Yoshimura engine", etc. Wonder if it's from that stuff.

Anyway I'm interested to find out more.

George

hotdog · « **Reply #982 on:** September 07, 2015, 01:14:12 PM »

George, that tracker frame was a track master - I got the n.o.s. morris wheels from that one. Good luck - might turn out to be some good quality unobtainium.

http://forums.sohc4.net/index.php?topic=148592.0

Dale.

Instagram - Lumpy Cam Motorcycles

FB - Lumpy Cam Motorcycles

gschuld · « **Reply #983 on:** September 07, 2015, 02:19:26 PM »

Quote from: hotdog on September 07, 2015, 01:14:12 PM

George, that tracker frame was a track master - I got the n.o.s. morris wheels from that one. Good luck -

Hotdog

I should have updated my post. I tracked down that info after making my post. The trackmaster cb750 flat tracker frame referenced is below.

I'm interested in an unusual proper road race frame. Who knows.

George

Greggo · « **Reply #984 on:** September 30, 2015, 11:24:38 AM »

WTT: 34mm chokes for Weber DCOE 40 carbs for 30mm chokes. You want to drag? I want to street. Let's swap.

Bill/BentON Racing · « **Reply #985 on:** October 01, 2015, 04:09:49 PM »

Beautiful Webers for sell in parts for sale section!

Sorry, Greggo

, Bill

livefast_dieold · « **Reply #986 on:** October 25, 2015, 03:27:44 PM »

I'm clearing some stuff from my workshop, my marzocchi front fork is on ebay, starting price 300 €.

http://www.ebay.it/itm/-/161869495454?

gschuld · « **Reply #987 on:** November 01, 2015, 08:13:19 AM »

http://forums.sohc4.net/index.php/topic,152621.0.html

Who needs a vintage drag bike?

George

MRieck · « **Reply #988 on:** November 01, 2015, 03:39:13 PM »

Custom Hardweld CB550 cam from Delta cam for sale. New..unused. Specs @ .050 as measured on Cam Doctor Intake open 12/close 76 Duration 268 .340 lift. Exhaust open 76/close 11 Duration 267 Lift 339. Hot cam with some mid/late RPM power. I'd recommend pistons, springs and some porting. 275.00 shipped domestic with NO cam core exchange. A good deal considering no core exchange and it is a hardwelded cam.

RP · « **Reply #989 on:** November 10, 2015, 07:46:16 AM »

D&K frame with oil tank, seat/fender, and chain guard.

http://www.ebay.com/itm/331701538030?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649

Swoop · « **Reply #990 on:** November 26, 2015, 04:26:24 AM »

RC327 used
$150 plus shipping from Canada
More pics on request

Steve

gschuld · « **Reply #991 on:** November 26, 2015, 04:50:32 AM »

Sold. I'll take it Swoop. I'll send you a PM

George

Swoop · « **Reply #992 on:** November 26, 2015, 11:17:51 AM »

Sold!

Justind97 · « **Reply #993 on:** December 01, 2015, 03:23:03 PM »

78 CB550 engine. Motor has not been run

MRieck stage 3 port work.
Serdi valve job
New Up sized valves (kibble white)
New valve springs
New seals
Oil line relocation done to side of head (lines included)
New 59.5mm wiseco pistons
Cylinder decked and bored. .40thou squish
New hi/vo chain (oem Honda)
New timing chain (oem Honda)
New timing chain tensioner sliders. (Both front and back)
Gearbox has been tumbled
Crank has been balanced
Rods have been balanced, shot peened
Rods have new big end bearing shells
All new seals (oem Honda)
New Barnett clutch, (plates, friction discs and springs)
Oil pump has all new seals
New Webcam cam
New hard welded rocker arms
Kickstart delete (TTR400)
Starter deleted

The motor is essentially all brand new.

$3500 shipped CONUS

I have at least $6000 into this

gschuld · « **Reply #994 on:** December 04, 2015, 06:24:32 AM »

Big bore pistons.

Does Anyone have any new/NOS 73.25 to 73.75mm pistons, 10 to 12.5:1 compression (for k head) that they would part with?

Also same question between 70.25 and 71mm(for k head)?

Thanks,

George

MRieck · « **Reply #995 on:** December 05, 2015, 05:21:25 AM »

Quote from: gschuld on December 04, 2015, 06:24:32 AM

Big bore pistons.

Does Anyone have any new/NOS 73.25 to 73.75mm pistons, 10 to 12.5:1 compression (for k head) that they would part with?

Also same question between 70.25 and 71mm(for k head)?

Thanks,

George

I have a set of 71mm pistons (MTC) NIB that came from APE. They are for a K. I do not think you will find pistons larger than 73mm as the sleeves get to thin. I also have NIB 72mm flat top JE pistons.

cbr954 · « **Reply #996 on:** December 05, 2015, 07:29:26 AM »

MTC stills a few sets of 72mm pistons on there shelf. I bought two sets last winter. They said they had a couple NOS high compression and a couple low compression turbo pistons left over. Would be worth a call to them see what they have left.

754 · « **Reply #997 on:** December 05, 2015, 02:05:57 PM »

Jeff on here had some MTC big slugs..new..

Think the name is jefft... Had some RC stuff up a while back...new member..

gschuld · « **Reply #998 on:** December 06, 2015, 09:48:11 AM »

Thanks for the replies. I will check into these leads. Sent you an email Mike

George

MRieck · « **Reply #999 on:** December 23, 2015, 05:57:39 AM »

71mm MTC pistons, rings, pins and buttons 375.00. All new. 375.00

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 287468 times)

Swoop

Swoop