Author Topic: Race and Performance parts for sale and wanted. (Read 287453 times)

corky · « **Reply #1075 on:** August 22, 2016, 08:57:08 AM »

Seems like no one has anything to sell anymore! I am still looking for an RC intake manifold if anyone out there has one.....

Thanks,
Daniel

jaguar · « **Reply #1076 on:** August 23, 2016, 10:24:28 AM »

Has been slow these days.

Badluckhonda · « **Reply #1077 on:** August 23, 2016, 08:20:37 PM »

Two single wiseco 836 pistons and a single 810 Pistons with rings and pins never ran 60 each

Ricky_Racer · « **Reply #1078 on:** August 25, 2016, 06:06:05 PM »

29MM Smoothbore Mikunis. Nice condition. Smooth slide action. Came off Yoshimura-ported 812. $600 delivered, for board members.

PM for additional info. Thanks.

RR

Medyo Bastos · « **Reply #1079 on:** August 25, 2016, 06:49:33 PM »

NOS 65, 67, 70, 71, and 72mm piston kits tucked away under the bed

754 · « **Reply #1080 on:** August 25, 2016, 08:03:04 PM »

Corky, do you have an MPD two piece to trade ?
The RC is not my favorite, i have one right now..the drawback to trading would be the throttle shafts are cut between carbs...meaning i would have to place the throttle pulling on the outboard side..

Badluckhonda · « **Reply #1081 on:** August 26, 2016, 02:52:25 AM »

Ape heavy duty studs and nuts. 135 shipped

Badluckhonda · « **Reply #1082 on:** August 26, 2016, 02:54:02 AM »

Lockhart Oil cooler kit complete just needs lines and hose clamps. Oil cooler is in great shape 100 plus shipping- sold

jaguar · « **Reply #1083 on:** August 29, 2016, 10:58:56 AM »

Ill be listing a pair of rebuilt ARDs.

If anyone is interested let me know.

jaguar · « **Reply #1084 on:** August 29, 2016, 10:59:26 AM »

I couldn't give away some CB750 HiPo cams here.....

Medyo Bastos · « **Reply #1085 on:** August 29, 2016, 04:56:31 PM »

me too, got ARD, Webers, Smoothbores, and a few other things under the bed

Bill/BentON Racing · « **Reply #1086 on:** August 29, 2016, 06:43:52 PM »

Maybe.....

754 · « **Reply #1087 on:** August 29, 2016, 06:52:01 PM »

Quote from: 754 on August 25, 2016, 08:03:04 PM

Corky, do you have an MPD two piece to trade ?
The RC is not my favorite, i have one right now..the drawback to trading would be the throttle shafts are cut between carbs...meaning i would have to place the throttle pulling on the outboard side..

Anyone want to trade two piece MPD for an RC manifold..

Medyo Bastos · « **Reply #1088 on:** August 29, 2016, 07:08:19 PM »

got a 1 piece mpd

754 · « **Reply #1089 on:** August 29, 2016, 08:46:30 PM »

I just sent a reply to Medyo.....and as I did..a lightbulb clicked on...
Webers off an RC with shafts cut off on inside...no problem..simply swap left with right, and bingo ..shafts on inside......duh....

legbags · « **Reply #1090 on:** September 02, 2016, 08:54:26 PM »

Looking for some cb750 to vm29 intake boots. I hear there are places to buy new. Also Anyone have a nice used set?

Also looking for 2 chrome tops for vm29, and maybe a set of new drain plug bolts.

Thanks.

dragracer · « **Reply #1091 on:** September 04, 2016, 06:59:37 PM »

Quote from: legbags on September 02, 2016, 08:54:26 PM

Looking for some cb750 to vm29 intake boots. I hear there are places to buy new. Also Anyone have a nice used set?

Also looking for 2 chrome tops for vm29, and maybe a set of new drain plug bolts.

Thanks.

KZ Enterprises.

Retro Rocket · « **Reply #1092 on:** September 04, 2016, 07:33:45 PM »

Quote from: legbags on September 02, 2016, 08:54:26 PM

Looking for some cb750 to vm29 intake boots. I hear there are places to buy new. Also Anyone have a nice used set?

Also looking for 2 chrome tops for vm29, and maybe a set of new drain plug bolts.

Thanks.

Where abouts are you..? I have some but i'm in Australia

legbags · « **Reply #1093 on:** September 04, 2016, 07:37:51 PM »

USA. Indiana.

Medyo Bastos · « **Reply #1094 on:** September 04, 2016, 07:44:32 PM »

got a set of vm29's freshly rebuilt with new boots and chrome tops

...Save a tree, eat a beaver...

jaguar · « **Reply #1095 on:** September 06, 2016, 05:12:33 AM »

Have a rebuilt ARD
Polish on the arm is okay, not perfect.
Chrome on the head has a "patina" to it.

NEW
-Coil
-Condenser
-Points
-Cap
-Rotor
-Gaskets
-Seals
-Bearings
-Drive Belt
-Ect ect ect

This is the "later" set up that you can adjust the timing a bit by moving the head.

Unit on the right.

Jerry Rxman Griffin aka MuthaF'er · « **Reply #1096 on:** September 06, 2016, 10:27:27 AM »

Quote from: legbags on September 04, 2016, 07:37:51 PM

USA. Indiana.

If you want new try Sudco

Retro Rocket · « **Reply #1097 on:** September 06, 2016, 04:19:13 PM »

Quote from: Jerry Rxman Griffin aka MuthaF'er on September 06, 2016, 10:27:27 AM

Quote from: legbags on September 04, 2016, 07:37:51 PM
USA. Indiana.

If you want new try Sudco

Yep, wouldn't be worth the postage from Australia...

BPellerine · « **Reply #1098 on:** September 06, 2016, 06:44:31 PM »

Quote from: jaguar on September 06, 2016, 05:12:33 AM

Have a rebuilt ARD
Polish on the arm is okay, not perfect.
Chrome on the head has a "patina" to it.

NEW
-Coil
-Condenser
-Points
-Cap
-Rotor
-Gaskets
-Seals
-Bearings
-Drive Belt
-Ect ect ect

This is the "later" set up that you can adjust the timing a bit by moving the head.

Unit on the right.

adjust timing by moving the head?

jaguar · « **Reply #1099 on:** September 07, 2016, 03:45:43 AM »

They head itself has a few degrees of adjustment.
That way you don't have to deal with moving/resetting the pulleys

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 287453 times)