Author Topic: Race and Performance parts for sale and wanted. (Read 294147 times)

BLUE71TURBO · « **Reply #1275 on:** October 11, 2017, 09:29:55 PM »

How about contacting Russ Jr. ? He probably wants extra's for the R.C. Engineering drag bikes.

jaguar · « **Reply #1276 on:** October 12, 2017, 03:37:29 AM »

He was tagged in a FB post about them.
But didn't seem interested.

If they were needed for spares for one oh his bikes I could do a fair bit better.

jaguar · « **Reply #1277 on:** October 12, 2017, 05:38:28 AM »

Will trade for some other HiPo SOHC parts.
Maybe a weber manifold?
Magneto parts?
Something else?

BLUE71TURBO · « **Reply #1278 on:** October 12, 2017, 03:43:33 PM »

I have a R.C. Engineering angle drive for a KZ900 - KZ1000 I'm asking $400 obo. It is the housing and the timing drive shaft with the end gear.

The picture shows the setup with the distributor ( not included. It went to Terry in Australia )

BLUE71TURBO · « **Reply #1279 on:** October 12, 2017, 03:49:46 PM »

Here is the timing / drive shaft with the gear attached ( which is usually lost over time ).

jaguar · « **Reply #1280 on:** October 13, 2017, 10:33:05 AM »

Rods sold.

Bill/BentON Racing · « **Reply #1281 on:** November 06, 2017, 07:34:58 AM »

ARD MAGNETO'S 2 IN FOR SALE SECTION

jonnycakes · « **Reply #1282 on:** November 10, 2017, 08:10:38 AM »

CYCLEX internal charging system with working volvage regulator / rectifier/ capacitor. Go battery less and kick only like all the cool kids. 250 shipped lower 48.

jaguar · « **Reply #1283 on:** November 10, 2017, 11:22:47 AM »

Seeley project for sale.

jonnycakes · « **Reply #1284 on:** November 12, 2017, 06:29:40 AM »

Is this still around. I sent a Pm

jaguar · « **Reply #1285 on:** November 12, 2017, 07:13:51 PM »

What still around?

jonnycakes · « **Reply #1286 on:** November 12, 2017, 07:30:13 PM »

the KZ drive

corky · « **Reply #1287 on:** November 13, 2017, 09:20:01 AM »

Anyone out there have an RC manifold? I have some old performance Crane Cams I would be willing to trade, if interested.

Thanks!

jaguar · « **Reply #1288 on:** November 13, 2017, 09:41:42 AM »

There is this.
https://www.ebay.com/itm/MPD-Honda-CB750-CR750-Dellorto-carburetor-manifold-Cafe-Racer-NOS/332362943407?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2055119.m1438.l2649

BLUE71TURBO · « **Reply #1289 on:** November 16, 2017, 10:19:20 AM »

The R.C. Angle drive is SOLD ! Thanks Jonnycakes for the smooth transaction. Take care of your Bad Ass ride !

jonnycakes · « **Reply #1290 on:** November 18, 2017, 04:21:14 PM »

Quote from: BLUE71TURBO on November 16, 2017, 10:19:20 AM

The R.C. Angle drive is SOLD ! Thanks Jonnycakes for the smooth transaction. Take care of your Bad Ass ride !

Thanks brother, the drive arrived today, looks brand new inside.........you have personally brought my chopper back from the dead

BLUE71TURBO · « **Reply #1291 on:** November 20, 2017, 08:34:37 AM »

Jonnycakes i didn't bring it back to life, I just supplied the part. You are performing the operation to bring her back to life !! LOL !!

T1m32sh1n3 · « **Reply #1292 on:** November 22, 2017, 01:05:55 PM »

Jonnycakes.... messaged you about the cycex charging system.

Cb750 Racer · « **Reply #1293 on:** December 09, 2017, 09:46:01 PM »

Quote from: jaguar on October 11, 2017, 01:27:48 PM

$275 for the rods?
Still open to an offer.

Still for sale?

jaguar · « **Reply #1294 on:** December 10, 2017, 05:24:21 AM »

Long gone.

Medyo Bastos · « **Reply #1295 on:** December 10, 2017, 10:44:14 AM »

anyone got one under their bed?

Cb750 Racer · « **Reply #1296 on:** December 10, 2017, 12:13:08 PM »

Currently looking for a good set of high performance rods. Particularly golden rods in mind(stock length not 1/4 stroker). I have a set of Cycle X 890cc "pop top" pistons and a Cycle x ported head so the golden rods are a bit overkill. Down the road I would like to swap out the cylinders and run an atp/rajay classic turbo kit hence the need for such an extreme rod. I have an old Crane cam in MINT condition grind# 284-HO if someone would be interested in trades along with cash from my side on top.Also in the market for turbo kits if the price is right, Rajay model 302 F 40 in particular.

dragracer · « **Reply #1297 on:** December 10, 2017, 12:41:15 PM »

Quote from: Cb750 Racer on December 10, 2017, 12:13:08 PM

Currently looking for a good set of high performance rods. Particularly golden rods in mind(stock length not 1/4 stroker). I have a set of Cycle X 890cc "pop top" pistons and a Cycle x ported head so the golden rods are a bit overkill. Down the road I would like to swap out the cylinders and run an atp/rajay classic turbo kit hence the need for such an extreme rod. I have an old Crane cam in MINT condition grind# 284-HO if someone would be interested in trades along with cash from my side on top.Also in the market for turbo kits if the price is right, Rajay model 302 F 40 in particular.

APE Jay has a special right now on his pro street steel rods. If I didn't already have a new set of the Cycle Ex super rods, I'd definitely use the Ape rods in this 1030cc engine I'm building. I plan to spray a healthy shot of nitrous on top of those rods. I'm confident they'll hold up to the pressure.

Camrector · « **Reply #1298 on:** December 10, 2017, 05:29:02 PM »

Anyone have anything for a 550 under their bed, that I can put under my tree?!

Medyo Bastos · « **Reply #1299 on:** December 10, 2017, 05:35:04 PM »

Quote from: Camrector on December 10, 2017, 05:29:02 PM

Anyone have anything for a 550 under their bed, that I can put under my tree?!

Yeah, got a turbo for one. Ask Mommy nicely, she might put it under your tree

Sent from my iPhone using Tapatalk

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 294147 times)