Author Topic: Race and Performance parts for sale and wanted. (Read 294135 times)

754 · « **Reply #1325 on:** January 31, 2018, 10:15:19 AM »

Hey there is a big Magnuson on right now for 1/2 thst, far better blower.

T1m32sh1n3 · « **Reply #1326 on:** January 31, 2018, 11:15:22 AM »

Do you havea link for the magnuson?

Medyo Bastos · « **Reply #1327 on:** January 31, 2018, 02:46:56 PM »

Uglee Chris I dont think its complete ~> https://www.ebay.com/itm/MAGNUSON-SUPERCHARGER-m80-NOS/253378899615?hash=item3afe8f2e9f:g:otoAAOSwCtJaXu2l&vxp=mtr You can get an m-45 for a few hunnert dollars, and piece the rest of it for much less. there was an auction with all the pullies and side covers recently that was relisted a few times... looks like it sold though, right here ~> https://www.ebay.com/itm/Kawasaki-KZ1000-Drag-bike-blower-parts-KZ-Z1-Rare-parts/372190147134?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m1438.l2649

btw, looneytunes has a complete one. you could try hitting him up.

T1m32sh1n3 · « **Reply #1328 on:** January 31, 2018, 03:17:46 PM »

Thanks. Just wanted to check it out

754 · « **Reply #1329 on:** January 31, 2018, 05:13:49 PM »

Yes no drive but it's a blower that can, will, and has worked.
As opposed to one that needs exotic bearings, a d nobody seems to get any reliable amount of hours out of.

Medyo Bastos · « **Reply #1330 on:** February 01, 2018, 03:56:56 PM »

Quote from: 754 on January 31, 2018, 05:13:49 PM

Yes no drive but it's a blower that can, will, and has worked.
As opposed to one that needs exotic bearings, a d nobody seems to get any reliable amount of hours out of.

The one with exotic bearings fits our frames, no?

Where would you fit this?

Sent from my iPhone using Tapatalk

754 · « **Reply #1331 on:** February 01, 2018, 05:52:39 PM »

Turn it 90 degree, they run up and down, carb heads out into the battery area.
Bottom line the generally work.
I HAVE NEVER HEARD OF a Drouin that lasted very long...ever..
If easier to make it work is you cup of tea, buy the Drouin. I would rather have something that works.
I LOVE THE magnachargers.... even in the 70s when they were new people had constant trouble with that other kit.

The Kawi Snowmobile I posted, it has a magnacharger.

754 · « **Reply #1332 on:** February 01, 2018, 05:56:34 PM »

Like this,

RAZZ · « **Reply #1333 on:** February 01, 2018, 11:32:14 PM »

Frank I Think you will like this one http://www.ridejournal.com.au/supercharged-cafe-racer-based-1975-honda-cb750/

Sent from my iPhone using Tapatalk

Medyo Bastos · « **Reply #1334 on:** February 02, 2018, 04:21:36 AM »

ah, there you have it! no denying that is the cats meow!

754 · « **Reply #1335 on:** February 02, 2018, 09:31:42 AM »

Razz, I sure love that sound.. I wish it showed more of the blower and drive. ..hope its notbeing driven off points side.
I loved the Magnuson look since I first saw it in the 70s. AEE BUILT A FEW WITH them, Ness used them a lot.
I remember a Sportster on the street in Sturgis, with a Magnuson, hilborn injection, running alky, sounded like a funny car when he did a burnout... lol..

Jerry Rxman Griffin aka MuthaF'er · « **Reply #1336 on:** February 02, 2018, 06:07:43 PM »

Have the fins on the head been shaved off or is that a JMR cylinder??

Wouldn't it be nice if someone had a new plug and play system?!!

jaguar · « **Reply #1337 on:** February 08, 2018, 06:51:27 AM »

ARD Magneto "parts"

Basically everything save the magneto head and cover.

Listed on eBay for $500+
Will do much better for an interested forum member.

Swoop · « **Reply #1338 on:** February 09, 2018, 07:56:07 AM »

I have a set of four (4) RC flat top pistons for sale.
These are nominal 65mm (64.7mm) and marked 64H.
The new rings have been installed onto them and they were installed into a motor that was never fully assembled (or run).
Comes with pistons, rings, pins and metal buttons.
I will post or send pics if there is interest.

Looking for $250 OBO plus shipping from Canada.

Thanks

Steve

jaguar · « **Reply #1339 on:** February 13, 2018, 06:34:29 AM »

http://forums.sohc4.net/index.php/topic,170561.0.html

Selling off a fair bit of HiPo parts and such.
Highlights
-Weber manifold
-Rebuilt ARD set up
-HD primary chains
-Cush clutch damper upgrade (delrin)
-Ti valve adjuster nuts
-"mini" mikuni side draft set up (36PHH)

Few other odds and ends too.

754 · « **Reply #1340 on:** February 13, 2018, 09:20:53 AM »

Pm sent on manifold.

jaguar · « **Reply #1341 on:** February 16, 2018, 04:04:30 AM »

All this stuff NEEDS to go.
More then willing to wheel and deal.
Make some offers, let's get this stuff sold.

I'll ship anywhere in the world

Quote from: jaguar on February 13, 2018, 06:34:29 AM

http://forums.sohc4.net/index.php/topic,170561.0.html

Selling off a fair bit of HiPo parts and such.
Highlights
-Weber manifold
-Rebuilt ARD set up
-HD primary chains
-Cush clutch damper upgrade (delrin)
-Ti valve adjuster nuts
-"mini" mikuni side draft set up (36PHH)

Few other odds and ends too.

Bill/BentON Racing · « **Reply #1342 on:** February 16, 2018, 06:01:24 PM »

Ti nuts and Weber manifold?

jaguar · « **Reply #1343 on:** February 17, 2018, 03:13:48 AM »

Quote from: Bill/BentON Racing on February 16, 2018, 06:01:24 PM

Ti nuts and Weber manifold?

PM sent.

Swoop · « **Reply #1344 on:** February 17, 2018, 11:02:33 AM »

Quote from: Swoop on February 09, 2018, 07:56:07 AM

I have a set of four (4) RC flat top pistons for sale.
These are nominal 65mm (64.7mm) and marked 64H.
The new rings have been installed onto them and they were installed into a motor that was never fully assembled (or run).
Comes with pistons, rings, pins and metal buttons.
I will post or send pics if there is interest.

Looking for $250 OBO plus shipping from Canada.

PRICE REDUCED TO $150

Thanks

Steve

jaguar · « **Reply #1345 on:** February 19, 2018, 11:33:54 AM »

Quote from: jaguar on February 13, 2018, 06:34:29 AM

http://forums.sohc4.net/index.php/topic,170561.0.html

Selling off a fair bit of HiPo parts and such.
Highlights
-Weber manifold
-Rebuilt ARD set up
-HD primary chains
-Cush clutch damper upgrade (delrin)
-Ti valve adjuster nuts
-"mini" mikuni side draft set up (36PHH)

Few other odds and ends too.

Ti bolts
HD Primary chain
OEM carbs
HD studs
SOLD

Still have (and NEEDS TO GO)
Mikuni side drafts
Weber manifold
ARD mageto
Finned covers
Cush Clutch inserts

Make some offers.
Lets wheel and deal.
Everything must go.

jaguar · « **Reply #1346 on:** February 19, 2018, 12:24:07 PM »

ARD is sold.

Quote from: jaguar on February 19, 2018, 11:33:54 AM

Quote from: jaguar on February 13, 2018, 06:34:29 AM
http://forums.sohc4.net/index.php/topic,170561.0.html

Selling off a fair bit of HiPo parts and such.
Highlights
-Weber manifold
-Rebuilt ARD set up
-HD primary chains
-Cush clutch damper upgrade (delrin)
-Ti valve adjuster nuts
-"mini" mikuni side draft set up (36PHH)

Few other odds and ends too.

Ti bolts
HD Primary chain
OEM carbs
HD studs
SOLD

Still have (and NEEDS TO GO)
Mikuni side drafts
Weber manifold
ARD mageto
Finned covers
Cush Clutch inserts

Make some offers.
Lets wheel and deal.
Everything must go.

jaguar · « **Reply #1347 on:** February 19, 2018, 01:03:50 PM »

Some racer must need the "cush clutch inserts" or the adjustable cam sprocket.

VERY motivated.....

Cb750 Racer · « **Reply #1348 on:** February 19, 2018, 04:01:00 PM »

Perhaps a Cb750 Racer

T1m32sh1n3 · « **Reply #1349 on:** February 19, 2018, 04:18:27 PM »

What can you do on the adjustable cam sprocket and cam chain tensioner?

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 294135 times)