Author Topic: Race and Performance parts for sale and wanted. (Read 272084 times)

smcgill · « **Reply #1450 on:** November 28, 2020, 03:55:47 pm »

Doug, The Air-tech has the inner dash, painted black at the windscreen line, as original.I think you can see the black in this picture.
I've lived here for 30 years, the view never gets old. 180 degrees from Ketron island to the Narrows bridge .

smcgill · « **Reply #1451 on:** November 28, 2020, 04:05:13 pm »

Here finished with edging [Ebay] , I still need the "Rickman CR" edging.

754 · « **Reply #1452 on:** November 28, 2020, 06:13:41 pm »

I know where there might be a Rickman less screen , like the white one shown , less the rear part dipping down. It hard the black pebble insert but may have been nodded ,nit was on a square case Ducati twins , had the little notched indents, I think for mounts or indicator lights. I could ask if the guy still has it. West coast Canadal

Doug K · « **Reply #1453 on:** December 02, 2020, 03:03:43 pm »

Dear All:
Thanks for the assistance. Razz' suggestion of EBay Austria panned out. I've paid for and wait to receive what appears to be an early fairing that will be a match for my project. I'll post some pictures when the fairing arrives. Smcgill, the airtech looks perfect and may in fact prove cheaper and less work, but ya want that real feel.

Doug K

johno · « **Reply #1454 on:** January 12, 2021, 12:43:41 am »

Looking to build a spare 750 engine for the salt by salvaging a set of JE pistons DP62 12:1 & 2 ring formula 750 Dynoman supplied. I require a single piston either no.2 or 4. Cant buy single pistons from JE or Dynoman.

Hoping someone on the forum has damaged a piston in a set and would sell me a piston. If you have one or know of someone let me know. Im in a generous mood.

Also if you have changed your mind on a project build, I'm still looking for good set 900 pistons 10.5 or 12.5 compression, used or new in good nick. ( maybe 836 if over 12:1 comp r)

cheers Johno

CalleF · « **Reply #1455 on:** January 17, 2021, 01:52:07 am »

Hi. I am looking to buy a CB750 KO K1 K2 MARZOCCHI 38mm front fork.
Building a 1050cc bike and thought it would be good with a 38mm fork.
Many thanks

gschuld · « **Reply #1456 on:** January 21, 2021, 04:23:53 pm »

The Marzocci front end certainly has more panache, but an early model Goldwing 37mm front end conversion has been done many times and would certainly be more budget friendly as an option. However it will never have the same cool factor.

George

ACK777 · « **Reply #1457 on:** January 21, 2021, 06:48:36 pm »

Yea I cannot imagine how much the actual ones go for if the magnesium replicas of the 38s are going for $4400

Ricky_Racer · « **Reply #1458 on:** January 21, 2021, 07:33:55 pm »

I happen to have a NOS 38mm Marzocchi front end, but it's destined for the Japauto build. It was hanging on the wall of a warehouse in New Jersey when I heard about it. Evidently it was made for Japauto, because it looks identical to a CB750 K0-K2 front end, has a rhino horn triple, and takes all the CB750 Honda parts: axle, brakes, bearings, gauges.

I flew overnight to New Jersey from San Diego and slept in the NJ airport so I could meet the seller outside in a snowstorm and buy the front end. Then I turned right around and flew back to San Diego.

BTW, the last one of these I heard of was on German eBay, was not NOS, and was $2400. That was many years ago...

RR

Finnigan · « **Reply #1459 on:** January 21, 2021, 10:17:33 pm »

Pics or it didn’t happen

Ricky_Racer · « **Reply #1460 on:** January 21, 2021, 11:16:29 pm »

Tomorrow...

RR

Ricky_Racer · « **Reply #1461 on:** January 23, 2021, 12:04:11 pm »

Here ya go, Finnigan... One uber-rare 38mm Japauto Marzocchi front end. Looks like an oversized K0 front end and accepts all the standard CB750 parts!

RR

Finnigan · « **Reply #1462 on:** January 23, 2021, 01:05:34 pm »

Thanks for posting! Why are these so desirable?

Doug K · « **Reply #1463 on:** January 29, 2021, 01:13:06 pm »

I'm slowly getting a '74 rickman CR750 with a first year motor on the road. This thread directed me to an original fairing (my bike's got a Bikini Fairing). Now, I need the front and bottom fairing mounts. The owners manual/assembly Instructions does not provide adequate illustrations. Has anyone got an original set for sale, or could someone perhaps snap a picture of the parts? Thanks much in advance.
BTW, Cyclesavant on ebay has a mount but it appears different from the original. I'm hoping with a few good photos I can if necessary modify the ebay part to closer match the original.

T1m32sh1n3 · « **Reply #1464 on:** January 30, 2021, 03:51:39 pm »

NOS MTC rods for cb750. $250
I tried attaching photos but the file size is too large.

gschuld · « **Reply #1465 on:** January 30, 2021, 06:22:34 pm »

Quote from: Doug K on January 29, 2021, 01:13:06 pm

I'm slowly getting a '74 rickman CR750 with a first year motor on the road. This thread directed me to an original fairing (my bike's got a Bikini Fairing). Now, I need the front and bottom fairing mounts. The owners manual/assembly Instructions does not provide adequate illustrations. Has anyone got an original set for sale, or could someone perhaps snap a picture of the parts? Thanks much in advance.
BTW, Cyclesavant on ebay has a mount but it appears different from the original. I'm hoping with a few good photos I can if necessary modify the ebay part to closer match the original.

https://www.ebay.com/itm/Rickman-NOS-Road-Race-CR-750-CR-900-Fairing-Bracket-p-n-RK8-118-2/291984984857?fits=Model%3ACR750&hash=item43fba94b19:g:134AAOSw7YtfpXlF

https://www.ebay.com/itm/Rickman-CR-750-Honda-CB-750-Kawasaki-KZ-900-NOS-Main-Fairing-Bracket/293618359297?fits=Model%3ACR750&hash=item445d049c01:g:6AsAAOSwYgle67JN

I’m no Rickman expert, but check this out.

George

Doug K · « **Reply #1466 on:** January 31, 2021, 12:26:58 pm »

Thanks for that. That is the part that Cyclesavant has. However I suspect that it is the front mount for mounting the Rickman Fairing to the CB750 frame. The J-hooks catch a gusset absent on the Rickman frame. I'd love to see a good picture of an original CR Rickman frame front fairing and headlight mount. I could then perhaps modify the part offered on ebay.

dragracer · « **Reply #1467 on:** February 02, 2021, 08:49:51 pm »

Quote from: T1m32sh1n3 on January 30, 2021, 03:51:39 pm

NOS MTC rods for cb750. $300
I tried attaching photos but the file size is too large.

Aluminum rods??

T1m32sh1n3 · « **Reply #1468 on:** February 03, 2021, 04:15:02 am »

Yes aluminum rods. I dont know how i forgot the most important part of the description.

y2kc0wb0y · « **Reply #1469 on:** March 07, 2021, 03:25:42 pm »

Wanted/Looking for CR29’s

Sent from my iPhone using Tapatalk

y2kc0wb0y · « **Reply #1470 on:** March 08, 2021, 03:43:51 am »

Quote from: barbararron4362 on March 08, 2021, 01:13:55 am

Cr29’s is that wanted to buy

Sent from my iPhone using Tapatalk

Yes sir.

gschuld · « **Reply #1471 on:** March 26, 2021, 05:22:20 pm »

Does anyone have a MessnerMoto (Mirko) cam chain tensioner on the shelf they are not using?

George

bear · « **Reply #1472 on:** March 27, 2021, 05:44:35 pm »

Quote from: barbararron4362 on March 07, 2021, 11:28:34 am

Hello Buddy, a friend of mine got this kindly dm him (505) 393-8372

Sent from my iPhone using Tapatalk

These scamming bastards are still at it.

Finnigan · « **Reply #1473 on:** March 27, 2021, 06:19:04 pm »

Did he ever make a primary tensioner? I’m looking for one of those.

RAZZ · « **Reply #1474 on:** April 02, 2021, 08:06:11 am »

Quote from: CalleF on January 17, 2021, 01:52:07 am

Hi. I am looking to buy a CB750 KO K1 K2 MARZOCCHI 38mm front fork.
Building a 1050cc bike and thought it would be good with a 38mm fork.
Many thanks

Heres a marzocchi front maybe something og your interrest?

http://www.classic-motorrad.de/classifieds/ersatzteile/ersatzteile-in-alicante_i47632

Sent from my iPhone using Tapatalk

News:

Author Topic: Race and Performance parts for sale and wanted. (Read 272084 times)