So I haven't stopped working on this, but I only put in about an hour a month. Life has a way of getting in the way of your best intentions. Anyway, I see that a bunch of my images are now dead because of that complete pile of crap called photobucket so I'm switching to imgur.
Kick-start no longer clears rear-set, so I bent it to fit. I'm not sure what I should do about the discoloration:
The CR29 carbs come up very close to the frame, it took me a long time to figure out how to make throttle cables. I rigged up a make-shift hotpot, bought some cables form motion pro, and found some elbows from an italian moped manufacturer that just barely clear the frame:
I hated how I did the electrical before, so I started over. The battery goes all teh way at the end, its a very slim battery from powersonic, only 0.8ah. I'm not sure how well thats going to work, but we'll see. I made sure the headlight control switches I got have an off position:
I couldn't find a nice slim tach with oil pressure and neutral warning lights (at the time.... I have now...), so I used some automotive indicators. Uhg, look at those ugly fork nuts (or whatever they're called):
I decided to use a master cylinder from 4into1, I like how it looks:
I forgot about making the kick-stand longer before I painted it... not sure if its too short now...