« previous next »
Pages: [1] 2  All   Go Down

Author Topic: Single Carb Manifold?  (Read 12100 times)

0 Members and 1 Guest are viewing this topic.

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Single Carb Manifold?
« on: February 04, 2011, 01:40:37 AM »


I've thought this would be an alternative to the dwindling out supply of worn out 350f carbs.

I have a flat slide I have thought would work if I fab'd a manifold, but a friend says it will rob performance.


Anyone got info on this modification?   Will it, or has it worked?
« Last Edit: December 15, 2011, 02:33:23 AM by fiddy of industry »
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Online dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,002
  • WHAT?no gravy?
Re: Single Carb Manifold?
« Reply #1 on: February 04, 2011, 02:23:05 AM »
things that look good ,look good,shorter and straighter even length runners maybe?how about dual stage throttles,if that stuff was any good it would already be out there i think,sometimes i think wrongly though,candidate for a small su?
Logged

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,289
  • So, what do ya wanna talk about today?
Re: Single Carb Manifold?
« Reply #2 on: February 04, 2011, 02:36:42 AM »
I dunno aboot 35F stuff mate, but there are/were many different options for single and dual carb manifolds for the mighty CB750. That thing in your pic looks more like someone's attached an exhaust header to the inlet side of the head. Cheers, Terry. ;D
« Last Edit: February 04, 2011, 05:18:56 AM by Terry in Australia »
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Single Carb Manifold?
« Reply #3 on: February 04, 2011, 03:06:25 AM »
Quote from: dave500 on February 04, 2011, 02:23:05 AM
things that look good ,look good,shorter and straighter even length runners maybe?how about dual stage throttles,if that stuff was any good it would already be out there i think,sometimes i think wrongly though,candidate for a small su?

Prolly right about that.

What was in my imagination was similar, but the outside cylinders would get the straight shortened and the inner two would be curved to equal the length.

I found that pic on the recent engine paint  thread .

I wanted to do it just to motivate a start with a backyard foundry.
« Last Edit: February 04, 2011, 03:08:12 AM by tree fiddy of industry »
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Online dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,002
  • WHAT?no gravy?
Re: Single Carb Manifold?
« Reply #4 on: February 04, 2011, 03:26:41 AM »
shudder,chrysler hemi six long branch manifold with a two barrel,so uneven,not shudder six pack hemi with dellortos.
Logged

Offline Tom in Newcastle......Ontario

  • Hot Shot
  • ***
  • Posts: 522
  • Newcastle Ontario
Re: Single Carb Manifold?
« Reply #5 on: February 04, 2011, 06:02:13 AM »
Quote from: tree fiddy of industry on February 04, 2011, 01:40:37 AM


I've thought this would be an alternative to the dwindling out supply of worn out 35f carbs.

I have a flat slide I have thought would work if I fab'd a manifold, but a friend says it will rob performance.


Anyone got info on this modification?   Will it, or has it worked?


 What you are seeing in this pic is the exhaust..........http://www.dotheton.com/forum/index.php?topic=19961.0


but of course I have been wrong before ........ ???
« Last Edit: February 04, 2011, 06:06:54 AM by tjjkc »
Logged
1978 cb 550k......stock,my first re-build


Loud pipes suck.......

If you buy something.........pay for it !
If you sell something .......ship it !
If you say you are going to do something......do it !
If you have a question about something......ask it !
When the seller answers ........let him know whether you still want it or not !
If you receive something .....let the seller know you got it !
If you get something and are happy/un happy with it .....let the giver/seller know !
If you have any kind of issue,shipping/receiving/quality/price/shipping charges etc !
Communicate

Offline lrutt

  • Expert
  • ****
  • Posts: 916
Re: Single Carb Manifold?
« Reply #6 on: February 04, 2011, 06:16:07 AM »
Regardless of what it is exactly you are showing in your picture, those runners are just way too long. You have to shorten them down considerably. Better to make a plenum arrangement right at the intake ports then mount a nice 40 cv or something similar. Would be fairly simple.
Logged
06 Harley Sporster 1200C, 06 Triumph Scrambler, 01 Ducati Chromo 900, 01 Honda XR650L, 94 Harley Heritage, 88 Honda Hawk GT, 84 Yamaha Virago 1000, 78 Honda 750K w/sidecar, 77 Moto Guzzi Lemans 850, 76 Honda CB750K, 73 Norton 850, 73 Honda Z50, 70 & 65 Honda Trail 90, 70 & 71 Triumph 650s, 65 Honda 305 Dream, 81 Honda 70 Passport, 70 Suzuki T250II, 71 Yamaha 360 RT1B, 77 BMW R75/7, 75 Honda CB550K, 70 Honda CT70

Offline Mandic

  • Enthusiast
  • **
  • Posts: 234
Re: Single Carb Manifold?
« Reply #7 on: February 04, 2011, 06:17:53 AM »
That is the exhaust guys.  That engine is in a project in the "project shop" i believe.  He reversed the head mounting so the intake ports are on the front of the engine and the exhaust exits out the back.
Logged
77 CB750F - Cafe/Daily Rider

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,121
  • ... but some animals are more equal than others.
Re: Single Carb Manifold?
« Reply #8 on: February 04, 2011, 06:58:36 AM »
Just came in after visiting a friend who's working on a 350. He uses the same as exhaust...
Logged
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."

Offline fire113

  • Expert
  • ****
  • Posts: 1,011
Re: Single Carb Manifold?
« Reply #9 on: February 04, 2011, 07:13:19 AM »
looks funny  ;D

but the problem will be the filling of the cylinders because the different length!
1&4 has much longer ways then 2&3.

Good luck...Georg
Logged
Honda CB750 K0 & K0 & K1 & K1 & K2 & K2 & K6

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Single Carb Manifold?
« Reply #10 on: February 04, 2011, 07:16:42 AM »
Quote from: Mandic on February 04, 2011, 06:17:53 AM
That is the exhaust guys.  That engine is in a project in the "project shop" i believe.  He reversed the head mounting so the intake ports are on the front of the engine and the exhaust exits out the back.

Can that be done on a 550?

I've seen that on triumph twins, but I think other pics of this motor show stock intake manifolds.
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline Terry in Australia

  • Really Old Timer ...
  • *******
  • Posts: 33,289
  • So, what do ya wanna talk about today?
Re: Single Carb Manifold?
« Reply #11 on: February 04, 2011, 06:34:51 PM »
Yeah, of course you can mate, and it's easy, you just install the exhaust on the inlet side of the head and a set of carbs on the exhaust ports, and fire that sucker up! ;D

Seriously, I went thru that whole thread and there's no evidence that Joey Putt actually reversed anything, I'm guessing that he's a "fabricator", not a mechanic, and doesn't have a clue. He's posted that he'll have it running soon, but I wouldn't hold my breath mate, it aint gonna happen anytime soon............  ::)
Logged
I was feeling sorry for myself because I couldn't afford new bike boots, until I met a man with no legs.

So I said, "Hey mate, you haven't got any bike boots you don't need, do you?"

"Crazy is a very misunderstood term, it's a fine line that some of us can lean over and still keep our balance" (thanks RB550Four)

Online dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,002
  • WHAT?no gravy?
Re: Single Carb Manifold?
« Reply #12 on: February 04, 2011, 07:35:48 PM »
that head aint backwards
Logged

Offline Deltarider

  • Really Old Timer ...
  • *******
  • Posts: 8,121
  • ... but some animals are more equal than others.
Re: Single Carb Manifold?
« Reply #13 on: February 05, 2011, 03:34:15 AM »
Quote
that head aint backwards
Who's head? ;D
Logged
CB500K2-ED Excel black
"There is enough for everyone's need but not enough for anybody's greed."

Online dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,002
  • WHAT?no gravy?
Re: Single Carb Manifold?
« Reply #14 on: February 05, 2011, 03:57:37 AM »
my heads been inside out in the past(70s,its just the way it was then,boy am i glad that phase is over.)but never backwards.
Logged

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Single Carb Manifold?
« Reply #15 on: February 05, 2011, 04:24:10 AM »
Quote from: dave500 on February 05, 2011, 03:57:37 AM
my heads been inside out in the past(70s,its just the way it was then,boy am i glad that phase is over.)but never backwards.

Mine wasn't screwed on tight and I lost it. Anyone seen it around?
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Online dave500

  • Really Old Timer ...
  • *******
  • Posts: 17,002
  • WHAT?no gravy?
Re: Single Carb Manifold?
« Reply #16 on: February 05, 2011, 04:56:02 AM »
oh sorry tree fiddy,was that yours?,ill just fish it out of the dogs mouth,hes having a good chew.
Logged

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Single Carb Manifold?
« Reply #17 on: February 05, 2011, 07:22:55 AM »
Quote from: dave500 on February 05, 2011, 04:56:02 AM
oh sorry tree fiddy,was that yours?,ill just fish it out of the dogs mouth,hes having a good chew.
Send me a postage quote- I'll do a pay pal.
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline Old Scrambler

  • My CB750K3 has been in 39 States & 5 Provinces
  • Old Timer
  • ******
  • Posts: 3,808
Re: Single Carb Manifold?
« Reply #18 on: February 05, 2011, 08:36:46 AM »
C'mone now and use your head!........if you reverse the wires on the starter motor.........that will spin the motor backwards and its should run with that setup for intake and exhaust!  To fix the drive-line just install a belt drive with a twist! Life is simple.......as in the '70s!!!
Logged
Dennis in Wisconsin
'64 Triumph Cub & '74 Honda CB750 Bonneville Salt Flats AMA Record Holder (6)
CB750 Classic Bonneville Racer thread - http://forums.sohc4.net/index.php/topic,135473.0.html
'63 CL72 Project(s)
'66 CL77 Red
'67 Triumph T100C
'73 750K3 Owned since New
'77 750F2 Cafe Project
2020 ROYAL ENFIELD Himalayan

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: Single Carb Manifold?
« Reply #19 on: February 05, 2011, 09:03:25 AM »
When MV was about to make their comeback in, oh, whatever it was, 97, their initial design was intake on the front, exhaust out the rear.

I mean, it makes sense.. However, engine placement becomes an issue. It requires that the engine mass be moved further back, which is not really a good thing, especially for performance bikes.

The one posted above, well, i didn't read anything about it, but he's got what looks like some brand of carbs with a ram-air bellmouth. I didn't see anything obvious that showed a pressurization of the bowls, which means at speed, he'll be pushing air down the jet instead of drawing fuel up through it. Which means we will never be at speed.. lol.

Unless those carbs are designed differently that uh, most carbs.
Logged
No.

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Single Carb Manifold?
« Reply #20 on: February 05, 2011, 09:18:08 AM »
Quote from: mlinder on February 05, 2011, 09:03:25 AM
When MV was about to make their comeback in, oh, whatever it was, 97, their initial design was intake on the front, exhaust out the rear.

I mean, it makes sense.. However, engine placement becomes an issue. It requires that the engine mass be moved further back, which is not really a good thing, especially for performance bikes.


Might be something to it.

















« Last Edit: February 05, 2011, 09:23:28 AM by tree fiddy of industry »
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline mlinder

  • "Kitten Puncher"
  • Really Old Timer ...
  • *******
  • Posts: 5,013
  • Stop Global Tilting now!
    • Moto Northwest
Re: Single Carb Manifold?
« Reply #21 on: February 05, 2011, 09:25:40 AM »
Sure, i's been done, but I don't see his pressure issues addressed. And like I said, it will screw with weight balance on performance bikes.
Logged
No.

Offline Gearheadgreg

  • Hot Shot
  • ***
  • Posts: 254
  • Jamestown Rhode Island
Re: Single Carb Manifold?
« Reply #22 on: February 05, 2011, 10:33:13 AM »
The only 750 four i have seen with the head 180  is Russ Collins Sorcerer back in the seventies,,read page 45 at bottom. http://forums.sohc4.net/index.php?topic=67576.0
Logged
2001 Honda Supercharged Valkyrie   <iframe width="480" height="360" src="http://s1218.photobucket.com/user/meloafer/embed/slideshow/"></iframe> Just having some fun

Offline Don R

  • My Sandcast is a
  • Really Old Timer ...
  • *******
  • Posts: 19,844
  • Saver of unloved motorcycles.
Re: Single Carb Manifold?
« Reply #23 on: February 05, 2011, 10:45:25 AM »
Most automotive engines do not have a venturi per cylinder so adequate performance could be achieved. Runner length depends on rpm range and pulse tuning. You would not want low points that would cause fuel puddling. Most people aren't willing to do the work involved to get one correct.
Logged
No matter how many times you paint over a shadow, it's still there.
 CEO at the no kill motorcycle shop.
 You don't need a weatherman to know which way the wind blows.

Offline Roach

  • Expert
  • ****
  • Posts: 760
Re: Single Carb Manifold?
« Reply #24 on: February 05, 2011, 10:58:01 AM »
Quote from: tjjkc on February 04, 2011, 06:02:13 AM
Quote from: tree fiddy of industry on February 04, 2011, 01:40:37 AM


I've thought this would be an alternative to the dwindling out supply of worn out 35f carbs.

I have a flat slide I have thought would work if I fab'd a manifold, but a friend says it will rob performance.


Anyone got info on this modification?   Will it, or has it worked?


 What you are seeing in this pic is the exhaust..........http://www.dotheton.com/forum/index.php?topic=19961.0


but of course I have been wrong before ........ ???
its his exhaust running out the back look in the project shop on the reverse port project. it should work just fine he didn't just go sticking an exhaust on the opposite sides he flipped the valves to the other side and needed to get a custom cam grounded so that the exhaust lifts where the intake lifted and the intake lifted where the exhaust does. should work that way there is no reversing of anything. in principle  it should work just a matter of getting the afr right it will be taking in allot more air.

by no reversing od anything i mean the cam chain still runs the same direction
« Last Edit: February 05, 2011, 11:00:44 AM by Roach »
Logged
1978 CB550K Cafe Racer
Pages: [1] 2  All   Go Up
« previous next »