Topic: Strange washer with photo.

[seaweb11]

You guys are so good at photo questions.....
I will prefice this to say I have been in my "washer box" in the past few days, but this one was sitting away from that area. Not to say I didn't move it over there?

Is this thick washer from a Honda, because if it isn't it has to be from my Suzuki 1100 project and I have no idea where it goes?  It is tapered on the bottom side.

Washer by seaweb, on Flickr

[Elan]

how big? tapered bearing?

[Don R]

When I posted a washer pic everyone wnated something in the photo for scale so we can see how big it is. Muffler bearing washer from a 47 henway? Seriously, I don't remember seeing one on a 750. But I haven't looked at all of them.

[Duke McDukiedook]

Like a flange? we need a side shot.

[City Boy]

Hi.I believe what your pic represents is a washer used on various Honda models but specifically on the clutch basket shaft of CB750.It is placed under the lock tab washer that holds the clutch assembly on the primary shaft.    Rock On

[seaweb11]

Thanks guys. I do have a couple of 750's and a CL350.
Here is a side shot.

With the word "Out" stamped in it I thought might ring a bell with someone.


washer2 by seaweb, on Flickr

[scunny]

yep, thats off the clutch basket.

[seaweb11]

SWEET!
Just a washer that can go back in to the bin

Thanks guys, just didn't want to miss something on my Suzuki build, figured it was from one of my Honda bikes

[Magpie]

Must be from a later 750. The ones on my K1's are thinner, kind of humped up and don't say out on the them. Interesting whay you can find on the floor, like those tiny o-rings after you've buttoned up the motor. 
Cliff.

[Damfino]

Thanks guys. I do have a couple of 750's and a CL350.
Here is a side shot.

With the word "Out" stamped in it I thought might ring a bell with someone.


washer2 by seaweb, on Flickr

Uh Derek...that's the mighty feared 'Amityville Horror' washer.  It say's 'GET' on the other side don't it? 

[GammaFlat]

Muffler bearing washer from a 47 henway?

I'll bite.  What's a henway? 

[Magpie]

Depends, 2 to 5 pounds or so, more if it's a big one. Cliff.

[MCRider]

Muffler bearing washer from a 47 henway?

I'll bite.  What's a henway? 

Same thing a muffler bearing is... bogus.  

Or... about 4 lbs?  

[bwaller]

I want to say it fits inside the centrifugal filter of a 350, between the filter & nut. They were mean to be a bit of a spring washer when the nut was tightened.

[Duke McDukiedook]

Depends, 2 to 5 pounds or so, more if it's a big one. Cliff.

hehe. 

[donpark1086]

The cupped thick washer is from under circular nut in the CL350 centrifugal oil cleaner.  It should be returned there.