« previous next »
Pages: [1]   Go Down

Author Topic: Bolt Kits for Small SOHC4s  (Read 1685 times)

0 Members and 1 Guest are viewing this topic.

Offline PHeller

  • Full Member
  • *
  • Posts: 39
Bolt Kits for Small SOHC4s
« on: March 16, 2011, 11:55:42 AM »
I've found bolt kits for CB550 and larger, but none for the small fours like the CB400F.

I also can't seem to find cheap (read CHEAP) individual M10-1.25 x 30 and M10-1.5x75 socket head bolts in black for headlight and lower engine mount.

Any ideas where to look?
Logged

Offline zachz

  • Full Member
  • *
  • Posts: 63
Re: Bolt Kits for Small SOHC4s
« Reply #1 on: March 16, 2011, 12:47:28 PM »
Not sure on the 'coarse' thread 1.25x30mm bolt, but for the larger ones, McMaster has a bag of 10 for $7.17... http://www.mcmaster.com/#about-metric-socket-head-cap-screws/=bgmebe
Logged

Offline Cvillechopper

  • Is just pretending to be an
  • Expert
  • ****
  • Posts: 1,184
  • If not for my failures I'd never know my limits
Re: Bolt Kits for Small SOHC4s
« Reply #2 on: March 16, 2011, 12:57:44 PM »
Go to your local specialty fastener shop.  You'll get a decent price (sometimes better) than the assembled kits and you can get a full set.  Most pre-assembled kits only include the covers, not the case bolts so you're left with some nice shiny bolts next to the old ones that don't look that good even if you polish them.
Logged
It is the mark of an educated mind to be able to entertain a thought without accepting it.  Aristotle

Offline Raef

  • Expert
  • ****
  • Posts: 1,317
Re: Bolt Kits for Small SOHC4s
« Reply #3 on: March 16, 2011, 12:57:56 PM »
just bought a stainless bolt kit from these guys through their e-bay store, Alloyboltz.com, their web site is a bottomless pit of stuff.

I would check their ebay store or just e-mail them and ask they seem very accommodating and the bolt kit is packed and marked very well, the price pretty reasonable, I think it was 31.00 with shipping for 48 pcs

Mark
Logged

Offline Raef

  • Expert
  • ****
  • Posts: 1,317
Re: Bolt Kits for Small SOHC4s
« Reply #4 on: March 16, 2011, 01:01:12 PM »
just went and looked at the site there is a cb 400 kit on the front page for 51.00. I would go to the ebay story and inquire, they might sell it cheaper, as I said the one for the 550 was 31 with shipping
Logged

Offline Bowswell

  • CB750K1,CB750 K4,CB350F,CB400t1,meanstreak
  • Enthusiast
  • **
  • Posts: 250
Re: Bolt Kits for Small SOHC4s
« Reply #5 on: March 16, 2011, 01:23:25 PM »
Logged

Offline PHeller

  • Full Member
  • *
  • Posts: 39
Re: Bolt Kits for Small SOHC4s
« Reply #6 on: March 16, 2011, 03:20:17 PM »
Raef I tried AlloyBoltz so we'll see what they come back with. I don't want polished, but I want a few extras, so hopefully they can get the price down to that $31 you suggested.
Logged

Offline PHeller

  • Full Member
  • *
  • Posts: 39
Re: Bolt Kits for Small SOHC4s
« Reply #7 on: March 23, 2011, 07:55:13 AM »
They can sell the kit for $34.50. Not bad. I might be able to find it cheaper if I can find someone with a Fastenal account...
Logged

Offline Raef

  • Expert
  • ****
  • Posts: 1,317
Re: Bolt Kits for Small SOHC4s
« Reply #8 on: March 23, 2011, 09:25:36 AM »
I have found stainless on line cheap in the past but you had to buy boxes, I have never found fastenall cheap on anything. We joke at work that fastenall has anything you want or need, tomorrow, because it seems they never have what your after at the one you stop at.
Logged

Offline plug1

  • Enthusiast
  • **
  • Posts: 116
Re: Bolt Kits for Small SOHC4s
« Reply #9 on: March 23, 2011, 10:18:54 AM »
Logged
Pages: [1]   Go Up
« previous next »