« previous next »
Pages: [1] 2 3 ... 11   Go Down

Author Topic: Post your Dyno Graphs here.  (Read 81727 times)

0 Members and 7 Guests are viewing this topic.

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Post your Dyno Graphs here.
« on: February 14, 2011, 03:27:06 AM »
Dyno graphs only, no chit chat.

Sam. ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Post your Dyno Graphs here.
« Reply #1 on: February 14, 2011, 03:28:43 AM »
« Last Edit: February 14, 2011, 03:44:58 AM by SamCB750A »
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Doctor_D

  • Hot Shot
  • ***
  • Posts: 722
Re: Post your Dyno Graphs here.
« Reply #2 on: February 14, 2011, 06:39:35 AM »
836cc Wiseco's, 125-65 cam, Mike Rieck stage 4 head, CR29's with 230 main airs, YY7 needles, 70mm velocity stacks, and 138 mains, Dyna 2000 ignition, program 4, 37deg total advance, APE crank, CR750 replica 4 into 4 exhaust (plus a weeping head-gasket, and 3 loose cylinder studs  ;) )



125-75 cam is on the way...
Logged
Take care,
David
___________________________________________
1975 CB 750F - Project page: http://forums.sohc4.net/index.php?topic=66026.msg725479#msg725479
1978 CX500
1971 Norton Commando

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Post your Dyno Graphs here.
« Reply #3 on: February 14, 2011, 08:53:33 PM »
Dynojet dyno,
1134cc,
71mm Honda RC45 pistons,
Honda DOHC900 crank shaft,
Honda DOHC1100 conrods,
SOHC F2 head (modified),
.400mm lift short duration cam (since changed to Megacycle 125-75 cam),
Methanol fuel.



Cheers,
Brian

By the by a vid of the old girl on the dyno

http://s1278.beta.photobucket.com/user/yancohotel/media/PICT1792_zps4dcc0c3e.mp4.html
« Last Edit: April 28, 2020, 06:35:40 PM by bear »
Logged
The older I get the faster I was.

Offline classic bike tuner

  • Enthusiast
  • **
  • Posts: 113
  • http://www.cmrch.nl/
    • cmrch.nl/
Re: Post your Dyno Graphs here.
« Reply #4 on: February 16, 2011, 03:23:41 AM »
hallo cb four enthusiasts  i am new here  and have a dyno of a "slightly" modified 400
it is 546cc  [59bore] stronger rods [me4] modified head  [smaller inlet canels bigger valves]
modiefied stock carbs
stock cam   stock valve springs  stock crank


« Last Edit: February 16, 2011, 03:31:29 AM by classic bike tuner »
Logged

Offline paulages

  • Old Timer
  • ******
  • Posts: 3,876
  • 1976 cb735
    • DOOMTOWN RIDERS P.R.M.C.
Re: Post your Dyno Graphs here.
« Reply #5 on: February 16, 2011, 10:20:19 AM »
1974 CB550 (slightly modified).  ;D

Logged
paul
SOHC4 member #1050

1974 CB550 (735cc)
1976 CB550 (590cc) road racer
1973 CB750K3
1972 NORTON Commando Combat
1996 KLX650 R

Offline Howell

  • Honda the power of dreams
  • Hot Shot
  • ***
  • Posts: 573
    • CB500 classic racing
Re: Post your Dyno Graphs here.
« Reply #6 on: February 16, 2011, 12:01:43 PM »
CB500 tuned by Classic Bike Tuner
http://forums.sohc4.net/index.php?topic=63228.0
« Last Edit: February 17, 2011, 11:34:29 AM by Howell »
Logged
You meet the nicest people on a Honda

Offline mec

  • Hot Shot
  • ***
  • Posts: 503
Re: Post your Dyno Graphs here.
« Reply #7 on: February 17, 2011, 12:47:37 AM »
hello friends,

there are many here enjoy to see those dyno graphs, me too.
but think of the fact, that the graphs are relatively worthless without posting some infos, such as:
sort of fuel, some technical datas, displacement,.....

mec
Logged
Honda Monkey
Takeuchi TB 070
Massey Ferguson

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,771
Re: Post your Dyno Graphs here.
« Reply #8 on: February 17, 2011, 07:48:13 AM »
also listing what dyno it was read on.

i have more time dynoing cars and know that there is a big difference between a mustang dyno and a dynojet
Logged

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Post your Dyno Graphs here.
« Reply #9 on: February 17, 2011, 03:45:42 PM »
Quote from: mec on February 17, 2011, 12:47:37 AM
hello friends,

there are many here enjoy to see those dyno graphs, me too.
but think of the fact, that the graphs are relatively worthless without posting some infos, such as:
sort of fuel, some technical datas, displacement,.....
mec

Your right Mec, I have posted what I can off the top of my head.
I,m not playing "Secret Squirrel" and I will chase up more detail.
It's just that I,m not a Tech head so my mates don't burden me with a lot of the Tech. stuff.

Cheers,
Brian
Logged
The older I get the faster I was.

Offline ivanhoew

  • Hot Shot
  • ***
  • Posts: 298
Re: Post your Dyno Graphs here.
« Reply #10 on: February 24, 2011, 07:36:09 AM »
honda 400/4 ,450 yoshimura kit ,stock cam ,8.5:1 cr . ported head .ihi rhb5/1 turbo . single mikuni carb .suck through.clutch failed at 85 bhp . chassis dyno sun ram 12 twin roller eddy current loaded type .




Logged
just do it .

Offline odiewan

  • Enthusiast
  • **
  • Posts: 132
Re: Post your Dyno Graphs here.
« Reply #11 on: March 14, 2011, 12:42:18 PM »
73 CB750 with Pod, Carpy 4 into 1.
Idle jets: 40
Clip position: unknown
Main jets: 130
Power pretty much peters out above 5k rpm

Note: went to 120 and got much better power, especially above 5k.

Power & Air/Fuel vs rpm (looks weird, though)


Power & Air/Fuel vs MPH
« Last Edit: March 23, 2011, 09:10:50 AM by odiewan »
Logged
CB750K3
2009 Aprilia RS125
2001 Aprilia RSV Mille R
2002 Suzuki SV650S
1979 Vespa P125X

Offline Doctor_D

  • Hot Shot
  • ***
  • Posts: 722
Re: Post your Dyno Graphs here.
« Reply #12 on: March 19, 2011, 08:05:04 PM »
Newest one is in blue. Same setup, but with a 125-75 cam. Added 2 rwhp and 5(!) lb ft of torque, but peaks moved DOWN the rev range and not up.  Cam must be a bit advanced.

Logged
Take care,
David
___________________________________________
1975 CB 750F - Project page: http://forums.sohc4.net/index.php?topic=66026.msg725479#msg725479
1978 CX500
1971 Norton Commando

Offline lordmoonpie

  • Master
  • *****
  • Posts: 2,053
  • Feal the Fear and do it anyway...
    • Moonpie
Re: Post your Dyno Graphs here.
« Reply #13 on: March 23, 2011, 04:40:53 AM »
Good work David - what's that peak 81 or higher?
Logged
1994 Ducati 888 SP5
1951 Ducati 50cc Cucciolo
1981 Yamaha XV750 SE

Offline Doctor_D

  • Hot Shot
  • ***
  • Posts: 722
Re: Post your Dyno Graphs here.
« Reply #14 on: March 23, 2011, 09:08:20 AM »
Peak is 80.84 rwhp at 8000 rpm, but then it flattens out for nearly 1500 rpms before falling off.  The combo should keep pulling until 9500 rpms, but it's run out of air.

Basically, it seems that CR29's (with the 125-75 cam, Mike's head-work, and your pipes) are too small.

Anyone out there want to trade my lightly used (under 2 hours run time) CR29's for similarly nice CR31's?
Logged
Take care,
David
___________________________________________
1975 CB 750F - Project page: http://forums.sohc4.net/index.php?topic=66026.msg725479#msg725479
1978 CX500
1971 Norton Commando

Offline lordmoonpie

  • Master
  • *****
  • Posts: 2,053
  • Feal the Fear and do it anyway...
    • Moonpie
Re: Post your Dyno Graphs here.
« Reply #15 on: March 23, 2011, 09:16:13 AM »
Ah so if I ever get mine to a dyno, my old CR31s should be just the ticket!  ;D
Logged
1994 Ducati 888 SP5
1951 Ducati 50cc Cucciolo
1981 Yamaha XV750 SE

Offline bear

  • Vale Bill McIntosh ......"illegitimi non carborundum"
  • Old Timer
  • ******
  • Posts: 2,575
  • Leeton in Australia
Re: Post your Dyno Graphs here.
« Reply #16 on: March 23, 2011, 05:28:34 PM »
Quote from: lordmoonpie on March 23, 2011, 09:16:13 AM
Ah so if I ever get mine to a dyno, my old CR31s should be just the ticket!  ;D

We're waiting Simon ;D

Cheers,
Brian
Logged
The older I get the faster I was.

Offline andy750

  • Really Old Timer ...
  • *******
  • Posts: 7,940
Re: Post your Dyno Graphs here.
« Reply #17 on: April 23, 2011, 12:04:50 PM »
CB750K2
55,000 original miles on the bike

Mike Rieck (JMR) engine:
Bored out to 810cc
Dynoman 295 cam
Ported

Stock carbs
120/40 jets
Stock airbox/OEM air filter
Stock clutch
4-4 HM300s with baffles
Oil - regular 10W40 Penzoil - not changed since rebuild.

Added 2 gallons of Ultra 93 on the way to the dyno which mixed with the regular 87 I normally use.

Dyno was done personally by Rick Stetson at Harrys Machine Shop in Northborough. Rick is a world famous drag racer and has a little plaque as you walk in saying he is a member of the 200 mph club! Another plaque says 222.2 mph!! So he jumped on the K2 and did the dyno - graph shown was when bike was in 4th gear...was fun to watch...and the result is...





Before the second run (blue line) the bike was strapped down at front and back as the rear wheel was slipping - turns out the rear wheel is either not balanced or out of true - its way out apparently! Anyway on the second run the clutch slipped - you can see where....so possibly a few more HP when the wheel is sorted out.

So powerband is between 5000 -7000 rpm which is exactly where i have been feeling it on the highway.

Rick did mention the initial lag on the throttle due to the stock carbs so CV carbs or something else would eliminate this.

Very happy with the numbers! Thank you Mike!!

cheers
Andy
 
« Last Edit: April 23, 2011, 12:07:45 PM by andy750 »
Logged
Current bikes
1. CB750K4: Long distance bike, 17 countries and counting...2001 - Trans-USA-Mexico, 2003 - European Tour, 2004 - SOHC Easy Rider Trip , 2008 - Adirondack Tour 2-up , 2013 - Tail of the Dragon Tour , 2017: 836 kit install and bottom end rebuild. And rebirth: http://forums.sohc4.net/index.php/topic,173213.msg2029836.html#msg2029836
2. CB750/810cc K2  - road racer with JMR worked head 71 hp
3. Yamaha Tenere T700 2022

Where did you go on your bike today? - http://forums.sohc4.net/index.php?topic=45183.2350

Offline brewsky

  • Expert
  • ****
  • Posts: 1,110
Re: Post your Dyno Graphs here.
« Reply #18 on: July 10, 2011, 08:26:02 AM »
78 750 K8, stock motor, 42,000 miles, 2,500' elev, 83 degrees,  stock airbox w/K&N, Mac 4/1 with baffle. Jetted 127.5's and 3 shims under needles (for previously installed PODS)....way rich for this setup!

One pull at 1/2 throttle, one at full throttle.
« Last Edit: May 26, 2012, 12:52:28 PM by brewsky »
Logged
66 CA77
78 550K
78 CB750K
02 FZ1
09 GL 1800

Offline Doctor_D

  • Hot Shot
  • ***
  • Posts: 722
Re: Post your Dyno Graphs here.
« Reply #19 on: August 10, 2011, 08:20:55 PM »
RS34's only wanted to run on 3 cylinders, so I swapped my CR31's to rule out carbs before send the Dyna 2000 back for inspection.  Needless to say, it runs on all four, and well at that.



CR31's with 130 mains. Picked up 4hp over the CR29's, peak is now 84.76.  Torque is unchanged at 56 lb/ft.  50 lb/ft on tap from 5400 rpms to 9000 rpms.

Could go to 128's and back to YY8 needles as it's still a bit rich.  It's also only at 30 deg total timing, so I may dial in a bit more this weekend if I get a chance to get into the shop.
Logged
Take care,
David
___________________________________________
1975 CB 750F - Project page: http://forums.sohc4.net/index.php?topic=66026.msg725479#msg725479
1978 CX500
1971 Norton Commando

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,566
  • Big ideas....
Re: Post your Dyno Graphs here.
« Reply #20 on: August 11, 2011, 07:43:05 PM »
Nice. Getting there. I would like to see it hold HP at the end. The 34's are the answer. I'll email you.
  Mike
« Last Edit: August 11, 2011, 07:44:47 PM by MRieck »
Logged
Owner of the "Million Dollar CB"

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Post your Dyno Graphs here.
« Reply #21 on: August 12, 2011, 01:24:56 PM »
You're in the right place Danny. ;D

Sam ;)
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline voxonda

  • Master
  • *****
  • Posts: 2,231
Re: Post your Dyno Graphs here.
« Reply #22 on: October 17, 2011, 11:25:41 AM »
Suppose put it here too:


836 high compression
Cr 31's "ticklers
Flowed head with bigger in and outlet valves
Dyno ignition
Webcam 63b
4 open megga's
Logged
Better sorry for failing then for the lack of trying.

Offline Doctor_D

  • Hot Shot
  • ***
  • Posts: 722
Re: Post your Dyno Graphs here.
« Reply #23 on: October 19, 2011, 06:35:51 AM »
Quote from: voxonda on October 17, 2011, 11:25:41 AM
Suppose put it here too:


836 high compression
Cr 31's "ticklers
Flowed head with bigger in and outlet valves
Dyno ignition
Webcam 63b
4 open megga's

Congratulations on the nice numbers.  These are pretty much the exact same results that we got with my 836.

Vox      84.8hp 58.7lb/ft
David   84.7hp 56.8lb/ft

This winter I'll fiddle with the RS's again and see if there's another couple more HP to be found, but Voxonda's runs make me think this is close to the limit for this configuration.
Logged
Take care,
David
___________________________________________
1975 CB 750F - Project page: http://forums.sohc4.net/index.php?topic=66026.msg725479#msg725479
1978 CX500
1971 Norton Commando

Offline iomtt9

  • Enthusiast
  • **
  • Posts: 171
Re: Post your Dyno Graphs here.
« Reply #24 on: October 19, 2011, 01:20:43 PM »
Honda Classic Racer, 498cc.
Standard Crank.
Farndon Race Rods.
Original 1978 Yoshimura Isle of Man Cam.
Gas Flowed Head.
Wiseco Pistons.
Standard Inlet & Exhaust Valves.
S & W Valve Springs.
26mm CR Carbs, 110 Jets in 1&4, 105 Jets in 2&3.
4 Open Meggas.
Dyna 2000 S Ignition, 40 Deg.
This was tested on 27-3-10. New engine coming along slowly, will post when up and running.
« Last Edit: October 19, 2011, 01:35:33 PM by iomtt9 »
Logged
Pages: [1] 2 3 ... 11   Go Up
« previous next »