« previous next »
Pages: [1]   Go Down

Author Topic: Melted Ignition Switch Wires  (Read 899 times)

0 Members and 1 Guest are viewing this topic.

Offline socalenduro

  • Hot Shot
  • ***
  • Posts: 611
Melted Ignition Switch Wires
« on: February 16, 2011, 10:17:14 PM »
So my bike suddenly started becoming alive while the switch was in the off position. All the lights would go on, and the bike could be started and run.  If i moved the ignition switch around the power would die, and the switch would work properly.

I removed the switch thinking maybe i could do a simple rewire. After inspecting, the red and black wires were melted together most of the way up.

The ignition switch is new, so Im guessing I have another electrical issue
 

Please help!!!!!
Logged

Offline axehole54

  • Who the heck decided to call me a
  • Hot Shot
  • ***
  • Posts: 315
  • #169 North
Re: Melted Ignition Switch Wires
« Reply #1 on: February 16, 2011, 10:34:54 PM »
is the plug badly melted? mine had degraded badly and the contacts would touch and arc slowly melting the wires over time. Is this possibly your situation?
Logged
73 750k, 78 750k, 69 c10, 87 r1500 (c10), 94 fzr1000

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,812
  • bike in a box
Re: Melted Ignition Switch Wires
« Reply #2 on: February 17, 2011, 12:15:37 AM »
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline socalenduro

  • Hot Shot
  • ***
  • Posts: 611
Re: Melted Ignition Switch Wires
« Reply #3 on: February 17, 2011, 07:55:54 AM »
no both sides of the plug was fine, and the outside jacket was fine too ... just the wires were melted

I think Honda man has done it again
« Last Edit: February 17, 2011, 08:07:58 AM by socalenduro »
Logged

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,005
  • Gotcha!
Re: Melted Ignition Switch Wires
« Reply #4 on: February 17, 2011, 08:45:11 AM »
Seems to be a rash of bad ignition switches lately. If all these guys could post what brand they are if they know that would be great.
Logged
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

Offline socalenduro

  • Hot Shot
  • ***
  • Posts: 611
Re: Melted Ignition Switch Wires
« Reply #5 on: February 17, 2011, 11:05:30 AM »
the only brand i was able to find that was plug and play was the EMGO brand.
as honda man explains the that linked thread above, the wires in this switch are not rated for the correct amp.
also the correct ones were not manufactured after 08, which is why it seems like everyone is having this issue...

hondaman posted a work around, or there is always ebay
Logged

Offline socalenduro

  • Hot Shot
  • ***
  • Posts: 611
Re: Melted Ignition Switch Wires
« Reply #6 on: February 19, 2011, 05:27:09 PM »
ok maybe not...
in talking more with hondaman it looks like that switch is fine for the 350f....

any other ideas why my leads are melting?
Logged

Offline VTCBike750

  • Hot Shot
  • ***
  • Posts: 743
Re: Melted Ignition Switch Wires
« Reply #7 on: August 18, 2011, 06:42:37 PM »
Just ran across this. And well its begun
Logged
-Adam

1972 CB750 (current project)
http://forums.sohc4.net/index.php?topic=87951.0
Pages: [1]   Go Up
« previous next »