« previous next »
Pages: [1]   Go Down

Author Topic: Swingarm Swap  (Read 2188 times)

0 Members and 1 Guest are viewing this topic.

Offline custommade

  • Full Member
  • *
  • Posts: 13
Swingarm Swap
« on: February 24, 2011, 09:47:19 PM »
Any one know of the monoshock swingarms that will fit a cb550? CBR F2?
Logged

Offline Flying J

  • Old Timer
  • ******
  • Posts: 3,386
Re: Swingarm Swap
« Reply #1 on: February 24, 2011, 11:00:27 PM »
retro rocket knows a bit about this stuff try asking him. Ok ok ill not stir it up. I was going to do a swingarm mono on my 750 but i think im going to sell it now. But what i was looking at was a 86-88 gsxr swingarm. It is supposed to fit. The swing arm pivot are the same for the 750 and 550.
« Last Edit: February 24, 2011, 11:17:23 PM by ffjmoore »
Logged

Offline custommade

  • Full Member
  • *
  • Posts: 13
Re: Swingarm Swap
« Reply #2 on: February 25, 2011, 01:41:21 AM »
hahaha  ;D cheers ffjmoore
Logged

Offline Retro Rocket

  • Eggs are hard due too a
  • Really Old Timer ...
  • *******
  • Posts: 19,214
  • ROCK & ROLL
Re: Swingarm Swap
« Reply #3 on: February 25, 2011, 04:03:34 AM »
Well surprise surprise, i have one on one of my 750's although it is cut down as far as it can be cut and is set up for twin shocks, it is still almost 40mm longer than the 750's arm and far too long as a mono shock set up....This is on an F1 frame.


Mick
« Last Edit: February 25, 2011, 04:05:05 AM by Retro Rocket »
Logged
750 K2 1000cc
750 F1 970cc
750 Bitsa 900cc
If You can't fix it with a hammer, You've got an electrical problem.

Offline custommade

  • Full Member
  • *
  • Posts: 13
Re: Swingarm Swap
« Reply #4 on: February 25, 2011, 04:38:38 AM »
hmmm...I think the monoshock is fading, might just stick some fancy twins back on and end the pain.
thanks mick
Logged
Pages: [1]   Go Up
« previous next »