« previous next »
Pages: [1]   Go Down

Author Topic: Emgo Carburetor Synchronizer ??? Any reviews / comments?  (Read 4614 times)

0 Members and 1 Guest are viewing this topic.

Offline midnightrider

  • Out of the SOHC4 world for a while...
  • Enthusiast
  • **
  • Posts: 154
Emgo Carburetor Synchronizer ??? Any reviews / comments?
« on: March 01, 2011, 05:32:39 AM »
Emgo Carb Sync is on sale at Bike Bandit
http://www.bikebandit.com/emgo-carburetor-synchronizer?WT.mc_id=1484958&CAWELAID=711058163

Anyone have any any insight / reviews? 
How does it compare to the Morgan Carbtune (which I know is highly recommended but is more expensive).

Thanks!
Logged
1972 CB350 Four - "The Green Hornet"
http://forums.sohc4.net/index.php?topic=84975.0


I love being alive and I will be the best man I possibly can; I will take love wherever I find it and offer it to everyone who will take it... seek knowledge from those wiser and teach those who wish to learn from me.
-- Duane Allman's epitaph

Offline MasterChief750

  • Detonation
  • Expert
  • ****
  • Posts: 805
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #1 on: March 01, 2011, 05:37:24 AM »
i have one from years past. the needles bounce a lot unless you get dampers as the gauges arent oil filled. i highly recomend the morgan carbtune over these. they work and you can get pretty dam close if not right on. will just take a little more time.
Logged
1978 CB750 K - Project Red Headed Step Child
1976 CB750 K - Drag Bike
Some things i know, others i dont.
I AM THE STIG
Sam is THE STIG
he said i can be STIG3 tho

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #2 on: March 01, 2011, 05:45:00 AM »
That's almost $70.  I think I paid around $90 for my Morgan including shipping.  If you buy one, get the brass nipples with it though..
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

Offline midnightrider

  • Out of the SOHC4 world for a while...
  • Enthusiast
  • **
  • Posts: 154
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #3 on: March 01, 2011, 05:58:17 AM »
Quote from: fmctm1sw on March 01, 2011, 05:45:00 AM
That's almost $70.  I think I paid around $90 for my Morgan including shipping.  If you buy one, get the brass nipples with it though..

Thanks.

Did you buy direct form Morgan? 
Do you know if the 5mm nipples fit the CB350F
Logged
1972 CB350 Four - "The Green Hornet"
http://forums.sohc4.net/index.php?topic=84975.0


I love being alive and I will be the best man I possibly can; I will take love wherever I find it and offer it to everyone who will take it... seek knowledge from those wiser and teach those who wish to learn from me.
-- Duane Allman's epitaph

Offline fmctm1sw

  • Old Timer
  • ******
  • Posts: 3,042
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #4 on: March 01, 2011, 06:09:18 AM »
Quote from: midnightrider on March 01, 2011, 05:58:17 AM
Quote from: fmctm1sw on March 01, 2011, 05:45:00 AM
That's almost $70.  I think I paid around $90 for my Morgan including shipping.  If you buy one, get the brass nipples with it though..

Thanks.

Did you buy direct form Morgan? 
Do you know if the 5mm nipples fit the CB350F

Yeah, right from them in the UK.  I got it in less than a week I think but with the new customs issues, it may take longer.  I bought float bowl gaskets from SCI about two weeks ago and still don't have them.  I think it was the 5's that fit hondas.  There was one (suzuki maybe?) that used a different size...  It was on their site somewhere which size fit what...
Logged
Quote from: 754
Dude is that a tire ? or an O-ring..??

Quote from: inkscars
This is not a pod thread
This is not a #$%* on my vacuum gauges thread
This is a help or GTFO thread.

1973 CB350F
1973 CB350G
1975 CB550K
1983 GL650I
1973 CB750K3 (http://forums.sohc4.net/index.php?topic=92888.0)
1984 Kawasaki KLT-250 (AKA 3 wheeler of death)
1994 Honda TRX300
1999 Honda TRX250

nomad

  • Guest
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #5 on: March 01, 2011, 07:54:14 AM »
Quote from: fmctm1sw on March 01, 2011, 06:09:18 AM
... I think it was the 5's that fit hondas.

... It was on their site somewhere which size fit what...

Re: the Morgan Carbtunes

Can someone post a link to the page with that info.  I looked and didn't see it.  I'm sure it's there... I'm just missing it.  ???
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #6 on: March 01, 2011, 08:12:30 AM »
http://www.carbtune.com/

then hit the Accessories link in the left margin for the brass adapters.
« Last Edit: March 01, 2011, 08:14:47 AM by flybox1 »
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline Duanob

  • Bold Timer
  • Old Timer
  • ******
  • Posts: 4,009
  • Gotcha!
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #7 on: March 01, 2011, 08:17:24 AM »
I paid $56 delivered from a supplier on EBAY for the same gauge. They are made by one supplier and different marketers put their names on them, like EMGO. Why pay twice as much for a Morgan if close is close enough? But hey some guys pay $200 for a simple set of open end wrenches from Snap-on or similar when craftsmen work just as good. Doesn't make your bike run better. But I am a weekend worrior and don't work on my bike for a living.
Logged
"Just because you flush a boatload of money down the toilet, doesn't make the toilet worth more",  My Stepfather the Unknown Poet

1974 CB360T
1976 CB550K2 Resurrected
1976 CB550F2 Barn Find
1979 CX500 VG "HONDA-GUZZI"
2007 Moto Guzzi Breva 750ie
2015 BMW F700GS
Another 1976 CB550K Cafe?

  __o
_- \_<,
(*) /' (*)

nomad

  • Guest
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #8 on: March 01, 2011, 08:20:37 AM »
Quote from: flybox1 on March 01, 2011, 08:12:30 AM
http://www.carbtune.com/

then hit the Accessories link in the left margin for the brass adapters.

Ok, after scrolling down, I found it in the print at that bottom of the page... DOH!  ::)  Thanks.

"5mm kit fits: Any Honda"
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,301
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #9 on: March 01, 2011, 08:35:21 AM »
you can also get the permanent brass ones by motionpro w/caps & rings

http://www.motionpro.com/motorcycle/partno/08-0218/
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"

Offline plug1

  • Enthusiast
  • **
  • Posts: 116
Re: Emgo Carburetor Synchronizer ??? Any reviews / comments?
« Reply #10 on: March 01, 2011, 03:14:31 PM »
Z1 Enterprises has them a little cheaper. http://www.z1enterprises.com/detail.aspx?ID=2727   If I'm not mistaken this guy's a member here. There's also a video of one being used here.   http://www.sohc4.net/
« Last Edit: March 01, 2011, 03:19:11 PM by plug1 »
Logged
Pages: [1]   Go Up
« previous next »