« previous next »
Pages: [1]   Go Down

Author Topic: 350f jetting  (Read 1049 times)

0 Members and 1 Guest are viewing this topic.

Offline mack82

  • Full Member
  • *
  • Posts: 15
350f jetting
« on: March 10, 2011, 10:08:38 PM »
I'm running straight pipes and pod filters on my 350f.  What is the correct main jet size I should be running?
Logged

Offline faux fiddy

  • Just becaus I'm the second post on the pissed off thread doesn't mean I'm an
  • Old Timer
  • ******
  • Posts: 4,810
  • bike in a box
Re: 350f jetting
« Reply #1 on: March 10, 2011, 11:41:24 PM »
Logged
^^^^^^^/l^^^^^^^^^^^^^^/l^^^
. . ______/ l_________________/  l
<'  '  '   '  o .  . . . . . . .................(
 ' VVVVV'   ')))))____>-''''''''''''''''''\  l
' . vvvv_   -              -                 \/

Offline dirty dan

  • Full Member
  • *
  • Posts: 9
Re: 350f jetting
« Reply #2 on: March 10, 2011, 11:48:47 PM »
It's hard to say exactly, that's why I'd recommend that jet kit too.

Though, I think it would be safe to start at 85's and then go up from there if it isn't running right. My moneys on the 85's being what you need, though.
Logged

Offline flybox1

  • My wife thinks I'm a
  • Really Old Timer ...
  • *******
  • Posts: 14,289
Re: 350f jetting
« Reply #3 on: March 11, 2011, 06:57:04 AM »
Quote from: dirty dan on March 10, 2011, 11:48:47 PM
It's hard to say exactly, that's why I'd recommend that jet kit too.

Though, I think it would be safe to start at 85's and then go up from there if it isn't running right. My moneys on the 85's being what you need, though.
+1
expensive seeing that you'll only use 4 of them, but worth the hassle of not having to order several times.
start w 85's
Logged
'78 750K (F3 engine) PD42b's, Modified airbox w/K&N  filter, 40/110 jets, 1 needle shim, IMS@ 1 turn out. Kerker + Cone 18" QuietCore

Past Bikes
1974 550K0 (stock), 1973 CB350F (stock), 1983 Yamaha XS400K (POS)
77/78 cool 2 member #3
"Knowledge without mileage equals bullsh!t" - Henry Rollins

"This is my CB. There are many like it, but this one is mine…"
Pages: [1]   Go Up
« previous next »