« previous next »
Pages: [1]   Go Down

Author Topic: Cleaning carbs with a Dremel tool..  (Read 8142 times)

0 Members and 1 Guest are viewing this topic.

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Cleaning carbs with a Dremel tool..
« on: March 06, 2011, 11:21:42 PM »
hey just got done cleaning outside of my CB500 carbs with a dremel tool.. check out the pics..
Logged
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Re: Cleaning carbs with a Dremel tool..
« Reply #1 on: March 06, 2011, 11:24:01 PM »
Before After
Logged
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline SteveRogers

  • Full Member
  • *
  • Posts: 41
Re: Cleaning carbs with a Dremel tool..
« Reply #2 on: March 07, 2011, 03:32:42 AM »
I've done that before and can appreciate the time it takes to do it! Nice!
Logged

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Re: Cleaning carbs with a Dremel tool..
« Reply #3 on: March 07, 2011, 08:07:52 AM »
Yeah four cups of coffee and a P an G sandwich...
Logged
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline nk140

  • Enthusiast
  • **
  • Posts: 116
Re: Cleaning carbs with a Dremel tool..
« Reply #4 on: March 11, 2011, 07:58:06 AM »
what attachment did you use to clean them?
Logged

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Re: Cleaning carbs with a Dremel tool..
« Reply #5 on: March 12, 2011, 05:24:00 PM »
I used the brass fittings.. all three wheel large cone and small.. Medium to low setting..
Logged
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline jacquesleclochard

  • Hot Shot
  • ***
  • Posts: 267
  • If Tin Can do it, you can do it!
    • Tin Can Customs
Re: Cleaning carbs with a Dremel tool..
« Reply #6 on: March 29, 2011, 05:07:02 PM »
Saw the pics, got inspired, bought a Dremel and went ahead. What a job! Annoying nooks and crannies, but it looks good.

I used the steel fitting. Cleaned up real nice. Now what do I do to protect the surface?
Logged

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Re: Cleaning carbs with a Dremel tool..
« Reply #7 on: March 29, 2011, 06:49:41 PM »
I didn't use anything.. a little mothers once and while will work great... no one will see the center carbs anyway.. so if you take off the tank and get in there and do alittle finger polishing they will be good..
Logged
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline JoshuaJames

  • Enthusiast
  • **
  • Posts: 162
Re: Cleaning carbs with a Dremel tool..
« Reply #8 on: May 08, 2011, 03:43:23 PM »
any photos of the attachments that were used? not too familiar with these tools.....
Logged

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Re: Cleaning carbs with a Dremel tool..
« Reply #9 on: May 17, 2011, 11:41:18 PM »
Yeah I need to buy some more then I will post pics..
Logged
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: Cleaning carbs with a Dremel tool..
« Reply #10 on: January 25, 2012, 10:52:50 PM »
No pictures of the tools used.

Real disappointing.
Logged

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Re: Cleaning carbs with a Dremel tool..
« Reply #11 on: January 26, 2012, 05:44:12 PM »
Alright..I'll do some pics... I have an extra carb..
Logged
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: Cleaning carbs with a Dremel tool..
« Reply #12 on: January 27, 2012, 01:32:22 PM »
Quote from: littlegreena100 on January 26, 2012, 05:44:12 PM
Alright..I'll do some pics... I have an extra carb..

Even just a pic of the actual tool used with the Dremel. Thanks Littlegreena100.
If you can do this, you will know that you have helped many other people.
Logged

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Re: Cleaning carbs with a Dremel tool..
« Reply #13 on: January 27, 2012, 02:08:53 PM »
Mostly these and the smaller pointer ones..
http://www.ebay.com/itm/36pc-BRASS-WIRE-CUP-WHEELS-BRUSHES-4-DREMEL-TOOL-CMB38-/320419030924?_trksid=p3284.m263&_trkparms=algo%3DSIC%26its%3DI%26itu%3DUCI%252BIA%252BUA%252BFICS%252BUFI%26otn%3D21%26pmod%3D320419028685%26ps%3D54
 But in brass..The metal ones tear up the carb surface... take your time ..use safety classes..the little wires brake off and will stick you in the eye.. then go over with mothers polish..

Pic added in case eBay link goes away.  ;)

« Last Edit: January 27, 2012, 02:39:36 PM by Bob Wessner »
Logged
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline lucky

  • Really Old Timer ...
  • *******
  • Posts: 6,717
Re: Cleaning carbs with a Dremel tool..
« Reply #14 on: January 31, 2012, 12:40:18 PM »
Thanks for posting that photo of the tools that you used.
You have just helped many people.
Logged

Offline Pecantree

  • Hot Shot
  • ***
  • Posts: 447
Re: Cleaning carbs with a Dremel tool..
« Reply #15 on: January 31, 2012, 04:47:46 PM »
The Harbor Freight near my house has a blister pack of those for about 5/6  bucks.
Logged
http://www.harvestclassic.org/

"The suspect had experienced a ballistic interlude earlier in the evening" Miss Pao said, "Regrettably not filmed, and relived himself of excess velocity by means of an ablative technique."         ......    ?    ........         "She say you have road rash."
Pages: [1]   Go Up
« previous next »