« previous next »
Pages: [1]   Go Down

Author Topic: Problem with spokes and HD rim  (Read 1463 times)

0 Members and 1 Guest are viewing this topic.

Offline mini-maire

  • Full Member
  • *
  • Posts: 4
Problem with spokes and HD rim
« on: May 20, 2011, 03:49:10 PM »
Just now I am asking a question already!

I have a problem to mount the spokes on my rear rim.
Rays come from TAS Classic motorsport, the rim is from a HD, and the hub is that of a CB 750 K6.
All departments has raised to the nuts, and they are not well positioned in the hub.
I really do not know what to do, so if anyone has fitted these rays on a CB 750 I know what I did wrong.
I wanted to post pictures but I do not know how.

Thank you in advance for your help (and sorry for my English)



« Last Edit: May 21, 2011, 12:10:50 AM by mini-maire »
Logged

Offline mini-maire

  • Full Member
  • *
  • Posts: 4
Re: Problem with spokes and HD rim
« Reply #1 on: May 21, 2011, 12:11:57 AM »
I just had the pictures
Logged

Offline Flying J

  • Old Timer
  • ******
  • Posts: 3,386
Re: Problem with spokes and HD rim
« Reply #2 on: May 21, 2011, 01:02:06 AM »
I dont know where my post is but that is how the spokes were on mine, as well as other members on this forum. I used an air tool and a small cut off wheel and cut them off and smoothed them out. Worked fine.
Logged

Offline Flying J

  • Old Timer
  • ******
  • Posts: 3,386
Re: Problem with spokes and HD rim
« Reply #3 on: May 21, 2011, 01:04:39 AM »
Logged

Offline mini-maire

  • Full Member
  • *
  • Posts: 4
Re: Problem with spokes and HD rim
« Reply #4 on: May 21, 2011, 03:38:37 AM »
Thanks ffjmoore

I see you have the same problems as me, you cut all the spokes, or only some, because I think I should cut all.
Logged

Offline Flying J

  • Old Timer
  • ******
  • Posts: 3,386
Re: Problem with spokes and HD rim
« Reply #5 on: May 21, 2011, 08:15:28 AM »
anything that sticks above the nut you should cut off.
Logged
Pages: [1]   Go Up
« previous next »