« previous next »
Pages: [1]   Go Down

Author Topic: CB750F wheel conversion  (Read 3751 times)

0 Members and 1 Guest are viewing this topic.

Offline kos

  • Hot Shot
  • ***
  • Posts: 718
    • m3racing.com
CB750F wheel conversion
« on: March 08, 2011, 12:24:26 PM »
Does anyone know if the first CB750F that had 4 into one ex and rear disc on wire wheel...if that wheel will bolt up to CB750F2 swingarm with the brake caliper fitting without any mods?

KOS
Logged
220...221, whatever it takes.

Offline tweakin

  • tear down
  • Master
  • *****
  • Posts: 1,955
Re: CB750F wheel conversion
« Reply #1 on: March 08, 2011, 12:56:56 PM »
Quote from: kos on March 08, 2011, 12:24:26 PM
Does anyone know if the first CB750F that had 4 into one ex and rear disc on wire wheel...if that wheel will bolt up to CB750F2 swingarm with the brake caliper fitting without any mods?

KOS

I am running a 1976 cb750F rear hub and brake rotor on my CB750F2, only mod I needed to do was a little bit of a spacer modification to make it work in the rear.  I started with multiple different sized rear wheel spacers then machined them down to fit.  The rear was the easy part.  For the front I used a complete 1977 GL1000 front end, including brakes.



« Last Edit: March 08, 2011, 01:05:38 PM by tweakin »
Logged

Offline KRONUS0100

  • MAD MATT THE MANIAC
  • Expert
  • ****
  • Posts: 1,217
Re: CB750F wheel conversion
« Reply #2 on: March 08, 2011, 01:00:45 PM »
I am running 1978 CB750F2 rims on my 76 F.. direct bolt in swap.  also running a 76 GL1000 front.
Logged
MATT
current bikes:  1976 CB750F, 1981 GS1100E
bikes owned:1981 GL1100I, 1990 GS500E, 1981 GS850, 1977 and 1979 GS750, 1974 CB750, 1975 CB750, and a 1982 GS750E

Offline cobra2411

  • Enthusiast
  • **
  • Posts: 197
Re: CB750F wheel conversion
« Reply #3 on: March 08, 2011, 03:31:09 PM »
Quote from: tweakin on March 08, 2011, 12:56:56 PM
Quote from: kos on March 08, 2011, 12:24:26 PM
Does anyone know if the first CB750F that had 4 into one ex and rear disc on wire wheel...if that wheel will bolt up to CB750F2 swingarm with the brake caliper fitting without any mods?

KOS

I am running a 1976 cb750F rear hub and brake rotor on my CB750F2, only mod I needed to do was a little bit of a spacer modification to make it work in the rear.  I started with multiple different sized rear wheel spacers then machined them down to fit.  The rear was the easy part.  For the front I used a complete 1977 GL1000 front end, including brakes.





You owe me a new keyboard... I was drooling so much over your bike it shorted out...  ;D
Logged

Offline jaguar

  • Old Timer
  • ******
  • Posts: 2,763
Re: CB750F wheel conversion
« Reply #4 on: March 08, 2011, 08:28:45 PM »
im running a lester that cam off a 78 on my 76
Logged

Offline kos

  • Hot Shot
  • ***
  • Posts: 718
    • m3racing.com
Re: CB750F wheel conversion
« Reply #5 on: March 09, 2011, 10:52:29 AM »
Quote from: cobra2411 on March 08, 2011, 03:31:09 PM
Quote from: tweakin on March 08, 2011, 12:56:56 PM
Quote from: kos on March 08, 2011, 12:24:26 PM
Does anyone know if the first CB750F that had 4 into one ex and rear disc on wire wheel...if that wheel will bolt up to CB750F2 swingarm with the brake caliper fitting without any mods?

KOS

I am running a 1976 cb750F rear hub and brake rotor on my CB750F2, only mod I needed to do was a little bit of a spacer modification to make it work in the rear.  I started with multiple different sized rear wheel spacers then machined them down to fit.  The rear was the easy part.  For the front I used a complete 1977 GL1000 front end, including brakes.





You owe me a new keyboard... I was drooling so much over your bike it shorted out...  ;D


Thank you...that's what I needed. Very nice look machine!
Kos
Logged
220...221, whatever it takes.
Pages: [1]   Go Up
« previous next »