Author Topic: new family member - CB200  (Read 944 times)

0 Members and 1 Guest are viewing this topic.

Offline CaféElite

  • Expert
  • ****
  • Posts: 808
  • 1975 CB550
new family member - CB200
« on: March 06, 2011, 06:41:42 PM »
Just got this today. $250 got me 75 CB200 with title but poor compression. I really didnt need this but I didnt think it was a bad buy for the money. Looks like I might be hanging out on hondtwins a bit.

CB550's
Kansas City..

Religion is like masturbation, do it at home and keep it to yourself

Offline chickenman_26

  • Hot Shot
  • ***
  • Posts: 598
    • Motorcycle Consumer News
Re: new family member - CB200
« Reply #1 on: March 06, 2011, 07:12:59 PM »
Those are great little bikes. There's a good chance that the compression will come up if you adjust the valve clearances. Have fun with it.

Stu
MCN DTF

Offline ekpent

  • Really Old Timer ...
  • *******
  • Posts: 13,512
  • To many bikes-but lookin' for more
Re: new family member - CB200
« Reply #2 on: March 07, 2011, 07:10:37 AM »
Those gas tanks seem to be popular with the cafe crowd.

Offline CaféElite

  • Expert
  • ****
  • Posts: 808
  • 1975 CB550
Re: new family member - CB200
« Reply #3 on: March 12, 2011, 05:47:57 PM »
Will any of you CB200 guys point me to where you are buying stock parts? Mainly things like sprockets, carb kits, coils and plug wires...etc etc..

Thanks..
CB550's
Kansas City..

Religion is like masturbation, do it at home and keep it to yourself

Offline tbpmusic

  • Expert
  • ****
  • Posts: 791
Re: new family member - CB200
« Reply #4 on: March 13, 2011, 09:27:52 AM »
Will any of you CB200 guys point me to where you are buying stock parts? Mainly things like sprockets, carb kits, coils and plug wires...etc etc..

Thanks..

For a coil on mine, I just bought "half" of a replacement set for a Honda Four - one coil with two plug wires.
Think it was off EBay, a straight-ahead bolt-up.
Sprockets I had to find as aftermarket, same with carb kits.
Mentioning carb kits, I usually don't even bother - quality control is in the toilet these days, you really can't depend on accurate jet sizes or anything. So I normally just clean up the original parts and reuse them whenever possible.


« Last Edit: March 13, 2011, 09:30:01 AM by tbpmusic »
"If you can't fix it with a hammer, then it's an electrical problem"

Bill Lane
 '71 CB450 Mutant/ '75 CB200/ '81 CM200/ '71 C70M

Offline bryanj

  • Really Old Timer ...
  • *******
  • Posts: 14,025
  • CB500 Number 1000036
Re: new family member - CB200
« Reply #5 on: March 15, 2011, 10:53:29 AM »
Common fault was same as 175 in that if thrashed from cold the rings would shatter. Was a very common bike in UK so try Dave Silver for bits
Semi Geriatric ex-Honda mechanic and MOT tester (UK version of annual inspection). Garage full of "projects" mostly 500/4 from pre 73 (no road tax in UK).

Remember "Its always in the last place you look" COURSE IT IS YOU STOP LOOKIN THEN!