« previous next »
Pages: 1 ... 5 6 [7]   Go Down

Author Topic: Manufacturers Cup 2017  (Read 21913 times)

0 Members and 1 Guest are viewing this topic.

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,303
  • Humboldt, AZ
Re: Manufacturers Cup 2017
« Reply #150 on: July 17, 2017, 11:39:55 PM »
You are rich at part throttle; in the second video I can hear it at around 48-50 seconds before you drop the hammer. You had the same issue last summer when it was hot, but not in the fall when it was cooler. ;)
Logged
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #151 on: July 18, 2017, 12:02:58 AM »
Quote from: scottly on July 17, 2017, 11:39:55 PM
You are rich at part throttle; in the second video I can hear it at around 48-50 seconds before you drop the hammer. You had the same issue last summer when it was hot, but not in the fall when it was cooler. ;)

I found trash in the carbs right after that race in Memphis when it was acting up. I cleaned them up and had no more issues until May of this year.
Logged

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #152 on: July 18, 2017, 03:13:16 PM »
I added another YouTube video. It's of my first qualifying pass on the 4.60 index class dragbike. Kawasaki,not a SOHC. Just search under Loney motorsports.
Logged

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,591
  • Gusto mo titi ko?
    • project
Re: Manufacturers Cup 2017
« Reply #153 on: July 18, 2017, 04:23:29 PM »
Frankie I'm not finding you under looney motorsports???


Sent from my iPhone using Tapatalk
Logged

Offline dusterdude

  • Really Old Timer ...
  • *******
  • Posts: 8,488
Re: Manufacturers Cup 2017
« Reply #154 on: July 18, 2017, 05:29:25 PM »
Looney!!!!,now thats funny

Sent from my R1 HD using Tapatalk

Logged
mark
1972 k1 750
1949 fl panhead
1 1/2 gl1100 goldwings
1998 cbr600 f3

Offline scottly

  • Global Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,303
  • Humboldt, AZ
Re: Manufacturers Cup 2017
« Reply #155 on: July 18, 2017, 09:29:10 PM »
The motor sounds nice and crispy at "idle" and WFO, but sounds soggy when at part throttle before launch. Last November when it was cooler, it wasn't as bad, but I can still hear the difference. You might want to try lowering the needle a notch or two.
Logged
Don't fix it if it ain't broke!
Helmets save brains. Always wear one and ride like everyone is trying to kill you....

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #156 on: July 18, 2017, 10:24:14 PM »
Quote from: dusterdude on July 18, 2017, 05:29:25 PM
Looney!!!!,now thats funny

Sent from my R1 HD using Tapatalk



My friends either have jokes or need reading lessons. Lol
I'm pretty sure I typed my name in correctly above but I'll double check 😁
Logged

Offline Medyo Bastos

  • Master
  • *****
  • Posts: 1,591
  • Gusto mo titi ko?
    • project
Re: Manufacturers Cup 2017
« Reply #157 on: July 19, 2017, 03:48:49 AM »
i was just fooling frankie.  thank you for posting up vids for the rest of us to ;D
Logged

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Manufacturers Cup 2017
« Reply #158 on: July 19, 2017, 07:03:16 AM »
Ian's rear tire! Wow.
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline kmb69

  • Master
  • *****
  • Posts: 2,041
Re: Manufacturers Cup 2017
« Reply #159 on: July 19, 2017, 08:08:58 AM »
Quote from: Bill/BentON Racing on July 19, 2017, 07:03:16 AM
Ian's rear tire! Wow.

Which one of yo machines you gonna put that on Billie?  ???  ;)  8)

Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Manufacturers Cup 2017
« Reply #160 on: July 19, 2017, 08:13:46 AM »
That's just the stabilizer attached to the front wheel of his Honda 50 Bill. hahaha.
 
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline MRieck

  • Really Old Timer ...
  • *******
  • Posts: 10,565
  • Big ideas....
Re: Manufacturers Cup 2017
« Reply #161 on: July 19, 2017, 11:42:54 AM »
Quote from: kmb69 on July 19, 2017, 08:08:58 AM
Quote from: Bill/BentON Racing on July 19, 2017, 07:03:16 AM
Ian's rear tire! Wow.

Which one of yo machines you gonna put that on Billie?  ???  ;)  8)
I thought it was a spare for the trailer? ??? ;D
Logged
Owner of the "Million Dollar CB"

Online Jerry Rxman Griffin aka MuthaF'er

  • This MuthaF'er is getting to be a
  • Really Old Timer ...
  • *******
  • Posts: 14,923
  • Bought her new 4/75
Re: Manufacturers Cup 2017
« Reply #162 on: July 19, 2017, 11:53:47 AM »
Naw Mike, too much tread  :D
Logged
As of today 3/13/2012 my original owner 75 CB750F has made it through 3 wives, er EX-wives. Free at last.  ;-)

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Manufacturers Cup 2017
« Reply #163 on: July 19, 2017, 12:42:30 PM »
Billy's tyres were mint in the tread dept compared to Ian's. hahahaha.
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,725
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Manufacturers Cup 2017
« Reply #164 on: July 19, 2017, 01:34:16 PM »
Well,  did replace this at rest area! Lol
Logged
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #165 on: July 19, 2017, 02:07:23 PM »
Quote from: Bill/BentON Racing on July 19, 2017, 01:34:16 PM
Well,  did replace this at rest area! Lol

Bill, I replace one before we left the track sunday. It was a little bald around the edges but holding air well.
Logged

Offline dragracer

  • Really Old Timer ...
  • *******
  • Posts: 5,123
  • CB750F Dragbike
Re: Manufacturers Cup 2017
« Reply #166 on: July 19, 2017, 02:11:32 PM »
Here's proof that Wilbur and Bill made it to the race.
Logged

Offline Sam Green Racing

  • Moderator
  • Really Old Timer ...
  • *****
  • Posts: 16,068
  • I REALLY? hate black rims.
Re: Manufacturers Cup 2017
« Reply #167 on: July 20, 2017, 04:08:23 PM »
OK, I'm tired out and ready for bed but I don't remember if I heard how you guys did on the Sunday ?????
Logged
C95 sprint bike.
CB95 hybrid race bike
CB95 race bike
CB92
RS 175. sprint/land speed bike
JMR Racing CB750A street ET drag bike
Pages: 1 ... 5 6 [7]   Go Up
« previous next »