Author Topic: Getting Bowl o-rings to stay  (Read 5518 times)

0 Members and 1 Guest are viewing this topic.

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Getting Bowl o-rings to stay
« on: March 15, 2011, 06:50:59 pm »
Just did my carbs and the o-ring wouldn't stay in place..I tried the grease, but didn't work...And I was getting crazy, so I tried Crazy glue gel..Just a dab "Very small amount,like tip of a pen" in the corners and poof!..I was putting the bowls on in no time..
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline cookindaddy

  • I sure love this bike!
  • Expert
  • ****
  • Posts: 1,153
Re: Getting Bowl o-rings to stay
« Reply #1 on: March 15, 2011, 07:03:35 pm »
You didn't say if you were using Honda gaskets or ?

But I am glad that glue worked for you!

I hope that you are riding soon
George with a black 78 CB750K (in Lion's Head, Ontario, Canada)

Offline Randy

  • Hot Shot
  • ***
  • Posts: 260
  • Nothing like a banging four under my legs..
    • Mission Detail
Re: Getting Bowl o-rings to stay
« Reply #2 on: March 15, 2011, 11:50:09 pm »
No the gaskets can from the K&L kit...
1973 CB500k, 1972 CB750 (New Arrival), 1978 Vespa P200 (New Arrival)

Offline Bill/BentON Racing

  • Really Old Timer ...
  • *******
  • Posts: 6,712
  • Ex Honda Service Manager, Cert. Honda Tech - Racer
    • BentON Racing
Re: Getting Bowl o-rings to stay
« Reply #3 on: March 29, 2011, 07:02:27 pm »
Gasgacinch works well and will come off the rubber,not sure about superglue.Bill
BentON Racing Website
OEM Parts | Service | Custom Builds
BentON Racing Facebook
Over 35 years of experience working on vintage motorcycles, with a speciality in Honda SOHC/4 with a focus on the CB750 and other models as well from 1966 - 1985.
______________________________________
1993 HRC RS125 | 1984 NS400R | 1974 Honda CB750/836cc (Calendar Girl) | 1972 CB 500/550 Yoshi Kitted 590cc | 1965 Honda CB450 Black Bomber | 1972 Suzuki T350 | 1973 88cc | Z50/Falcons Pit Bike | 1967 CA100| 1974 CB350 (400F motor)...and more.
______________________________________
See our latest build 'Captain Marvel' CLICK HERE

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Getting Bowl o-rings to stay
« Reply #4 on: March 29, 2011, 07:19:21 pm »
Clear nail polish works too
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline vames

  • Expert
  • ****
  • Posts: 806
Re: Getting Bowl o-rings to stay
« Reply #5 on: April 04, 2011, 02:47:24 pm »
Long time ago when I got round o-rings for the home-plate-shaped gasket channel, I cleaned it all up really good and used 4 or 5 strips of scotch tape to hold them in place (perpendicular to the gasket). Then once i put the bowls on and got the screws just to the point where they started to tighten, I blasted the tape with some wd40 and it pulled right out while the gasket stayed in place. Tighten the screws the rest of the way and it worked great. 

Offline Sledgehammer

  • Full Member
  • *
  • Posts: 27
Re: Getting Bowl o-rings to stay
« Reply #6 on: May 04, 2011, 08:24:09 am »
I used five pieces of scotch tape bolted the bowls down and until i had just enough clearance to get the tape out, i just pulled it out slowly.

I bet nail polish or glue is faster but I couldnt find any for the life of me. Had the tape though  ;D

Offline thrutheframe

  • Expert
  • ****
  • Posts: 1,003
  • did you bleed when you built that?
Re: Getting Bowl o-rings to stay
« Reply #7 on: June 12, 2016, 07:30:29 am »
Parkers O-ring lube.  Glues them in place while protecting them.  Super glue and nail polish will harden your O-ring and reduce its life.
'74 cb 750 K4
'79 CB 650 http://forums.sohc4.net/index.php?topic=83981.0
'75 CB 360T
'90 RC31 Hawk GT

Offline BobbyR

  • Really Old Timer ...
  • *******
  • Posts: 12,367
  • Proud Owner of the Babe Thread & Dirty Old Man
Re: Getting Bowl o-rings to stay
« Reply #8 on: June 12, 2016, 09:51:09 am »
Nail polish will probably be gone before the end of the season. The gas in the bowl eats it quick. Crazy glue is proabaly fuel resistant.
Dedicated to Sgt. Howard Bruckner 1950 - 1969. KIA LONG KHANH.

But we were boys, and boys will be boys, and so they will. To us, everything was dangerous, but what of that? Had we not been made to live forever?

Offline over40

  • Full Member
  • *
  • Posts: 15
Re: Getting Bowl o-rings to stay
« Reply #9 on: September 24, 2016, 01:20:29 am »
Just wanted to say the scotch tape worked well.

Offline jc914

  • Full Member
  • *
  • Posts: 12
  • 1974 CB550 "In progress"
Re: Getting Bowl o-rings to stay
« Reply #10 on: February 13, 2018, 07:42:48 am »
I've tried the nail polish (clear) and tape.  Tape (masking or scotch) method works best.
1974 CB550K0